Reddit reviews 1.25G SFP-T, 1000BASE-T Copper SFP, SFP to RJ45 SFP, for Cisco GLC-T/SFP-GE-T, Meraki MA-SFP-1GB-TX, Ubiquiti UF-RJ45-1G, D-Link, Supermicro, Netgear, TP-Link, Broadcom and More.
We found 10 Reddit comments about 1.25G SFP-T, 1000BASE-T Copper SFP, SFP to RJ45 SFP, for Cisco GLC-T/SFP-GE-T, Meraki MA-SFP-1GB-TX, Ubiquiti UF-RJ45-1G, D-Link, Supermicro, Netgear, TP-Link, Broadcom and More.. Here are the top ones, ranked by their Reddit score.
Data Rate: 1.25Gb/sInterface: RJ-45Reach: up to 100 meters transmission over CAT.5eCable Type: CAT.5eWide Compatibility - for Cisco, Cisco Meraki, Ubiquiti, D-Link, Supermicro, TP-Link, Broadcom, Linksys and Other Open Switches.
Since you just want 1Gbps just use this one: https://www.amazon.com/10Gtek-SFP-GE-T-1000Base-T-Transceiver-connector/dp/B00U77IJ2M/ref=sr_1_1_sspa
I have it in the one of the ports of the same NIC you have.
SFP (1G) and SFP+ (10G) are not necessarily interchangeable so I would get the SFP modules for that switch. I have these 10Gtek modules and they work flawlessly. Mod /u/mrjester has recently recommended looking at FiberStore but unless you're buying in bulk, the shipping cost may upset your math.
I used 3 of these. Two in a 48-500w and one in a 24-250w.
https://www.amazon.com/10Gtek-Compatible-SFP-GE-T-Transceiver-1000Base-T/dp/B00U77IJ2M/ref=sr_1_2?ie=UTF8&qid=1473344324&sr=8-2&keywords=10gtek+sfp
You can use any plain old SPF like this, and connect using a cat6 cable, or get any twinax cable as long as it's passive SFP. Since the switches are right next to each other, you won't need the added distance (and cost) of active cables, and some devices don't like active cables.
Just get this (for <100m):https://www.amazon.com/10Gtek-Compatible-SFP-GE-T-Transceiver-1000Base-T/dp/B00U77IJ2M/ref=sr_1_2?keywords=meraki+sfp&qid=1555905060&s=gateway&sr=8-2Do this instead.. even less...
https://www.google.com/aclk?sa=l&ai=DChcSEwiwps7V5uLhAhWBSg0KHQr1DiIYABAQGgJxYg&sig=AOD64_2URSLTIEi6-0Zr3HcT9zVVIlvQ4w&ctype=5&q=&ved=0ahUKEwi_ocrV5uLhAhVEmuAKHTL3BdIQpysIGg&adurl=
DACs are working, but not SFPs to RJ45. I tried using these https://www.amazon.com/dp/B07CYX6F7J because someone said the fiber transceiver worked, but hte RJ45 ones are not. Does anyone have any compatible receivers they are aware of? I am going to try these
https://www.amazon.com/dp/B00U77IJ2M/ref=sspa_dk_hqp_detail_aax_0?spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyMTFWRk9YNUFMSUZTJmVuY3J5cHRlZElkPUEwNDA5ODE1MTJKREJPR1FOQUdYJmVuY3J5cHRlZEFkSWQ9QTAyOTA2MTMxNUkySzlZWlFYSUg4JndpZGdldE5hbWU9c3BfaHFwX3NoYXJlZCZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU&th=1
Looking pretty darn good if it has basic diagnostics like the ones I don't see with these (Just "?" for temperature, etc...) when I hover over: https://www.amazon.com/10Gtek-Compatible-SFP-GE-T-Transceiver-1000Base-T/dp/B00U77IJ2M
On the cisco 4404 it has 4 slots for an sfp im connecting the laptop to one of those slots through
https://www.amazon.com/10Gtek-Compatible-SFP-GE-T-Transceiver-1000Base-T/dp/B00U77IJ2M/ref=mp_s_a_1_3?keywords=sfp+to+ethernet&amp;qid=1563137810&amp;s=gateway&amp;sr=8-3
The service port of the laptop is connected to a switch and thats how i can ping the wlc.
I've used
10Gtek Cisco Compatible GLC-T/ SFP-GE-T Gigabit RJ45 Copper SFP Transceiver Module, 1000Base-T https://www.amazon.com/dp/B00U77IJ2M/ref=cm_sw_r_cp_api_JAVDyb0G4F8VX
option-1 GlC-t sfp and rj45 cable.
https://www.amazon.ca/10Gtek-SFP-GE-T-1000Base-T-Transceiver-connector/dp/B00U77IJ2M/ref=sr_1_3?keywords=glc-t&qid=1555522623&s=gateway&sr=8-3
&#x200B;
option -2 Multi-Mode SFP 1G or 10G and fiber cable.
https://www.amazon.ca/U-Fiber-Multi-Mode-SFP-1G/dp/B01MY5498F/ref=sr_1_4?keywords=sfp+mm&qid=1555522707&s=gateway&sr=8-4
option -3 DAC cable
https://www.amazon.ca/10Gtek-SFP-H10GB-CU1M-10GBASE-CU-Passive-1-Meter/dp/B01D3015AW/ref=sr_1_4?keywords=sfp+-h&qid=1555522843&s=gateway&sr=8-4