Reddit Reddit reviews 15ft Micro USB & Mini USB Dash Cam &Type-C Hardwire Kit w. Mini(ACS)/LP Mini(ACN)/ATO(ATC or ACU)/Micro2(ACZ) Fuse, Micro to Mini/USB-C Port Adapters & 11.9V Real Battery Drain Protection

We found 12 Reddit comments about 15ft Micro USB & Mini USB Dash Cam &Type-C Hardwire Kit w. Mini(ACS)/LP Mini(ACN)/ATO(ATC or ACU)/Micro2(ACZ) Fuse, Micro to Mini/USB-C Port Adapters & 11.9V Real Battery Drain Protection. Here are the top ones, ranked by their Reddit score.

Electronics
Car Electronics Accessories
Car Audio & Video Installation Products
Car & Vehicle Electronics
15ft Micro USB & Mini USB Dash Cam &Type-C Hardwire Kit w. Mini(ACS)/LP Mini(ACN)/ATO(ATC or ACU)/Micro2(ACZ) Fuse, Micro to Mini/USB-C Port Adapters & 11.9V Real Battery Drain Protection
ONE FITS FOR ALL: With Micro to Mini and Micro to Type C port converters, the kit is basically fit for ALL Dash Cams or Car Charger like NuCam DL, Wireless Charger Phone Holder Nucharger Auto, Rexing, ROAV, Zero Edge, Anker, DDPai, Papago etc(not compatible with Garmin). Also, it comes with most popular fuse types including Low-Profile Mini, Mini, ATO(Regular), and Micro2. It has both left handed and right handed mini USB adapters.ENOUGH LENGTH: Overall 15ft hardwire kit can be installed basically on All vehicles. Input length: 3ft, Output length: 12ft.BATTERY DRAIN PROTECTION SYSTEM: For our 2019 updated version, we increased our cutoff voltage from 11.6V to 11.9V to protect vehicle battery voltage from dropping below 11.9V and not starting up. It’s also suitable for 24V systems.It is recommended to turn on parking mode for your dash cam to save your battery power. Find another listing B0787LD92N if you need different or adjustable cutoff voltage.EASY INSTALLATION: Installation is easy and clean without any help from professionals! However, our customer service is also immediately responsive if you do have questions.WARRANTY: One year free service for any question you are facing with this dash cam hardwire kit.
Check price on Amazon

12 Reddit comments about 15ft Micro USB & Mini USB Dash Cam &Type-C Hardwire Kit w. Mini(ACS)/LP Mini(ACN)/ATO(ATC or ACU)/Micro2(ACZ) Fuse, Micro to Mini/USB-C Port Adapters & 11.9V Real Battery Drain Protection:

u/asilluron · 81 pointsr/legaladvice

I use multiple YI Dashcams hardwired using this: https://www.amazon.com/MicroUSB-MiniUSB-Hardwire-Adapters-Protection/dp/B072J3L2JN/ref=sr_1_3?ie=UTF8&qid=1535916653&sr=8-3&keywords=dash+cam+hardwire+kit

​

Also, for the memory cards, make sure you get the "high endurance" kind. I use 2x128gb SD Cards... records for about 3 days.

​

I also have a cheap UBB distro that has switches coming from the "hardwire kit" that lets me turn off cams in case I'm in a safe spot or I'm backed against a wall, etc.

u/ccai · 12 pointsr/rav4club

Haven't gotten my Rav4 yet, but have cleanly installed dash cams and rear reverse cameras on half a dozen cars already.

For a clean install, [get a wiring kit like this.] (https://www.amazon.com/MicroUSB-MiniUSB-Hardwire-Adapters-Protection/dp/B072J3L2JN/ref=sr_1_8?keywords=fuse+box+usb&qid=1569253472&s=gateway&sr=8-8)

Run the USB line properly above the edge of the headliner to position the dash cam, run the line down the A-pilar trim, and route into the drivers side footwell, hiding the wire from sight. You will need to pull the fuse for cigarette lighters in the fuse box located in the driverside footwell, typically a yellow 20 amp, see diagram on the lid. Then you plug this in its place and add a fuse into the provided slot to keep all the cigarette lighters functional. That will provide you with the (+) line and just loosen a nut or bolt that's attached to anything metal in the foot well and wrap the black wire with the end stripped, around the bolt and tighten it in place, that should provide it with (-) to complete the circuit.

Zip tie up the loose wires and use larger zip ties to keep all the parts in place. Enjoy your clean installation. If that's too difficult, get a ~10ft USB cable that matches your dash cam's and run it under the headliner, A-pillar and run it though the trim and route around as best as you can to the nearest cigarette lighter with adapter or USB port and plug it. This method might work better running down the passengers side, but is the uglier messier method.

u/stylezLP · 4 pointsr/HRV

I have this https://www.amazon.ca/AUKEY-Wide-Angle-G-Sensor-Dual-Port-Charger/dp/B075VRXRD6/ref=sr_1_3?keywords=aukey+dash+cam+dr02d&qid=1555966124&s=electronics&sr=1-3


and tied it into the fuse box with this
https://www.amazon.ca/MicroUSB-MiniUSB-Hardwire-Adapters-Protection/dp/B072J3L2JN/ref=pd_bxgy_107_img_3/136-5260954-8759003?_encoding=UTF8&pd_rd_i=B072J3L2JN&pd_rd_r=07df55ef-6540-11e9-94bd-393e388bbf8d&pd_rd_w=oatjH&pd_rd_wg=05PLf&pf_rd_p=88f05819-6e09-4eaf-970e-fd581a2a2708&pf_rd_r=C8SC7MFT36MYWHRH58M6&psc=1&refRID=C8SC7MFT36MYWHRH58M6

​

Looks great as its design is more flush with the windshield. I have it mounted just to the left of the rear-mirror mount and it still leaves room for the mirror to angle for the driver. Very easy to install and the wires fit into the mouldings just fine.


Have a look at the quality it produces from one of my vids here https://www.youtube.com/watch?v=vRKKvaS7RmM
It has a refresh rate faster than my LEDs (which is why my LEDs are flickering in the reflection).

u/caileadar · 2 pointsr/Dashcam

I don't know why you bought such expensive kit and why such problem. Here is what I used to hook up my aukey dashcam. I got mine done in under 1 hour.

https://www.amazon.com/gp/product/B072J3L2JN/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

u/clips9000 · 2 pointsr/Trucks

The only way you'll get it to auto on/off is if you hardwire it in. Which is super easy.

https://www.amazon.ca/dp/B072J3L2JN/ref=cm_sw_r_other_apa_6rIPBbHPMWDWA

Is what I used. It's good little camera for the price. The quality is pretty good for watching on your phone..but I found it you try to take the video on to the computer it gets worse.

Just made me chuckle when I saw the little gray box while looking your truck over. Very nice man.

u/zorroww · 1 pointr/Dashcam

I am using the Viofo A129, and using this hardwire kit. https://www.amazon.com/gp/product/B072J3L2JN/ref=ppx_yo_dt_b_asin_title_o00__o00_s00?ie=UTF8&psc=1

It feels like metal.

u/andy2na · 1 pointr/CX5

You could buy a hardwire kit that has battery cutoff if your battery drops to 11.6V:

https://www.amazon.com/Hardwire-MicroUSB-adapter-Cellphone-Protection/dp/B072J3L2JN/ref=sr_1_1_sspa?ie=UTF8&qid=1527618174&sr=8-1-spons&keywords=micro+usb+hardwire+kit+with+lp+mini&psc=1

Depending on the parking mode features and whether or not it was motion activated, if you drive regularly, your car battery will likely be fine

u/MikeDawg · 1 pointr/dashcams

Sure, I use this nunet model as an example, because it is almost universally compatible with different USB inputs, and I literally just finished installing it in my car:

https://www.amazon.com/dp/B072J3L2JN?ref=ppx_pop_mob_ap_share

It, and similar other models sell (US) for ~$15

Edit: added piece

u/Jariners · 1 pointr/LifeProTips

I used this:

15ft MicroUSB & MiniUSB Dash Cam Hardwire Kit with Mini/LP Mini/ATO/Micro2 Fuse, Micro to Mini (and Type-C) Port Adapters and Battery Drain Protection System https://www.amazon.com/dp/B072J3L2JN/ref=cm_sw_r_cp_api_FlO2BbPX47DZB

Looks possible:

https://www.tacomaworld.com/threads/thinkware-f770-dashcam-install.465929/

u/CrashXCC · 0 pointsr/ottawa