Reddit reviews 2 RCA Male and 3.5mm Stereo Female, 6 Inch Gold Plated Connector, Y-Cable CNE63102
We found 105 Reddit comments about 2 RCA Male and 3.5mm Stereo Female, 6 Inch Gold Plated Connector, Y-Cable CNE63102. Here are the top ones, ranked by their Reddit score.
2 x RCA Male / 1 x 3.5mm Stereo Female, Y-Cable, 6 inch Gold Plated ConnectorAudio / Video ProductsAudio / Video Adaptors; 30S1-01260Connection: 3.5mm Stereo Female JackLength: 6 inchesColor: BlackWeight: 0.04 lbs.
Everyone here is making this so unnecessarily complicated. I just picked up DJing last year myself and it's not hard to start at all. I did quite a bit of research on what DJ controller would be the best for someone who is just starting, but also wants to have something more than a simple mixer.
Good luck and have fun! It's a blast to get into
I FORGOT you obviously need a laptop and some speakers. Any speakers will do, just make sure it's RCA output. Here is a cheap converter if you currently have a 3.5mm output.
It may not have a 3.5mm audio out, but does it have a component audio out (red and white plugs)? If so you can get one of these:
http://www.amazon.com/Male-3-5mm-Stereo-Female-Y-Cable/dp/B000I23TTE/ref=sr_1_7?ie=UTF8&qid=1332977123&sr=8-7
Something like this:
http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1410806118&sr=1-1-catcorr&keywords=rca+-+1%2F8+femail
RCA - female 1/8 inch, assuming your computer speakers have the 1/8" connector.
I don't really have a recommendation, but make sure you decide on how you'll setup your audio connection. Like if you want to use speakers get a monitor with a audio out port, or you could plug them directly into the ps4 controller but I got annoyed being tethered so I ended up buying like three adapters
https://www.amazon.com/AmazonBasics-Digital-Optical-Audio-Toslink/dp/B001TH7GSW/
https://www.amazon.com/Digital-Optical-Analog-audio-converter/dp/B004C4WPXA/
https://www.amazon.com/30S1-01260-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE/
Does the the tv have phono/RCA on the back? If yes you should be able to use something like this to get sound to the docking station and still get sound from the TV speakers.
Here's Exactly what you are looking for. LINK
there are more inexpensive options, but this one is highly rated and comes with the optical cable
And then one of these to convert the Output (RCA) to 3.5mm
LINK
I'm going to be honest with you. By the time you buy this you would probably be better off buying an inexpensive surround souind with an optical input. Sony also makes wireless headphones that are compatible with the PS3 and PS4
I have this one and they work and sound awesome
Elite Version
use the deafult old school playstation out. take those red and white RCA cabes and run them into an Adapter don't worry about the yellow video one, just leave it out.
then plug your computer speakers into that adapter.
in Audio Settings you can chose to make the audio come out of the RCA connection and the video through hdmi.
I did this when I only had a computer monitor, works great. also allows for headphones.
An optical audio to analog converter box (http://www.amazon.com/Portta-PETDTAP-Digital-Optical-Converter/dp/B005DIRI6I/ref=sr_1_1?s=electronics&ie=UTF8&qid=1413822076&sr=1-1&keywords=optical+to+analog+converter) . I use one and it works fine, the only thing is the converter has a L and R output so unless your speakers each have their own input, you'll need an Audio Splitter (http://www.amazon.com/gp/product/B000I23TTE/ref=pd_lpo_sbs_dp_ss_3?pf_rd_p=1944687542&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B00004Z5CP&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=0J626PGQ0VAXYV955QC0
http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE
The old-fashioned idea is for you to employ a 2 x RCA Male / 1 x 3.5mm Stereo Female, so you can take your stereo sound and plug some headphones into it. It seems like your TV doesn't have any proper audio out for it, so you'll have to use ones straight from the PS3.
Yep Schhiit dac and amp are fantastic and the HE400 is as well. Can't go wrong with that combo!Schitt ModiHifiman HE-400
Getting into magnetic planar speakers will get you into a whole other class of audio.
Magnetic planar speakers love power so a Magni wouldn't be bad either but that's over the $500 mark but it's not really required. Also the modi have rca outputs so you'll need something like this http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTEEDIT:Skip the modi and just get a Fiio E10 Sorry screwed up on the dac deal but the HE-400 is still worthy by and the Fiio E10 will perform as a good dac and amp.
I agree with pagonda, I'd return them.
if you're trying to connect a 3.5mm jack to RCA you can use an adapter: https://www.amazon.com/30S1-01260-Stereo-Female-Y-Cable-Connector/dp/B000I23TTE
You would probably want something like this RCA to headphone adapter then you can use any headphones you like.
I have a crappy pair of Behringer headphones I got with a practice amp kit I had bought early on in my guitar learnings, but here's some Sennheisers that look pretty nice.
Works with anything that has RCA audio out.
That sounds like a great setup to me. The DDJ-SB is fast becoming one of the main recommendations for those looking to go the Serato/Pioneer route and Sennheiser makes fantastic headphones with their iconic HD-25s being essentially an industry standard... While I've never used the HD6s I've seen good reviews and that blue is mighty sexy... :D
While computer speakers aren't the best for DJing they're better than nothing for practice at home. You'll need an adapter to go from the RCA master out on the DDJ-SB to the 1/8" TRS connector of the speakers though... This: http://www.amazon.ca/30S1-01260-Stereo-Female-Y-Cable-Connector/dp/B000I23TTE
(You will of course also need a laptop or computer.)
like this?
Search for '3.5mm to RCA' for more options.
Edit: Changed the link to the female version of the adapter.
Hmm let me try later at home. I bought a Turtle Beach wireless headset recently. It's meant for PS3 and X360 but I've been only using it on my PC.
EDIT:
Just looked through the manual and Google. Yup, the PS3 cannot transmit game audio via bluetooth. My wireless headset has a unit that plugs into the PS3 via optical cable and then transmit it over the 5Ghz range.
There's also a simple male-to-female Y-converter if you don't want a female-to-female converter.
Headphones. plug these into the back of your tv, then you can plug in your headphones.
You may want to specify what kind of connector the input of your sound system uses. Otherwise, how about something like this:
http://www.amazon.com/3-Way-Switch-Selector-Splitter-XBOX360/dp/B004T8KZCM/ref=sr_1_16?ie=UTF8&qid=1410823053&sr=8-16&keywords=3.5mm+switch
and then some of these to convert between 3.5mm jacks and composite:
http://www.amazon.com/eForCity-3-5mm-Auxiliary-Cable-Cord/dp/B0042DIZTE/ref=sr_1_4?ie=UTF8&qid=1410823147&sr=8-4&keywords=composite+3.5mm
http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE/ref=sr_1_1?ie=UTF8&qid=1410823147&sr=8-1&keywords=composite+3.5mm
A2DP is the name for steaming stereo Bluetooth audio. Android is setup as a sender of audio, not a receiver.
Your best bet would be to buy an A2DP receiver (like $50) and hook that up to your speaker system. They'll probably come with a 3.5mm jack but you can change that to RCA audio (the red/white plugs) with an adapter. You'll also want to get one that uses a power cord (usually usb) instead of batteries. I had a setup like this in my car, it worked great, like magic.
For instance:
A2PD Receiver (This is what I used, don't worry about the branding =P)
Mini USB power cord
3.5mm to RCA Audio Adapter (If you need it)
Total is ~$50
I've got nothing better to do so I'm going to put a lot of info here just incase anyone else comes across this thread with a similar problem. I'm assuming that you are switching back to a monitor which is why you're asking.
---------------------------------------------------------------------
---------------------------------------------------------------------
---------------------------------------------------------------------
Connecting PC speakers to TV (Kinda pointless just saying)
[For RCA Output] http://www.turtlebeach.com/product-detail/cables-parts/35mm-female-to-rca-stereo-splitter-cable/99
||OR||
[For 3.5MM output] http://www.amazon.com/BlueRigger-3-5mm-Female-Stereo-Audio/dp/B007ZIBURC/ref=sr_1_1?ie=UTF8&qid=1395552003&sr=8-1&keywords=3.5mm+male+to+female
----------------------------------------------------------------------
----------------------------------------------------------------------
[Connecting console to monitor with audio out on the same cable]
(HDMI to DVI with audio out) http://www.amazon.com/Converter-Audio-external-Needed-DA-HVNP/dp/B00BPX13D4/ref=sr_1_1?ie=UTF8&qid=1395552345&sr=8-1&keywords=hdmi+to+dvi+with+audio
||OR The Long Way||
You can mix these two adapters to get audio out and still use an hdmi cable by itself.
Using this:
http://www.amazon.com/AmazonBasics-Digital-Optical-Audio-Toslink/dp/B001TH7GSW/ref=sr_1_1?ie=UTF8&qid=1395552883&sr=8-1&keywords=optical+cable
Connect it to this:
(S/PDIF [Optical Out] to RCA) http://www.amazon.com/SANOXY%C2%AE-AGPtek-Digital-Optical-Converter/dp/B005DIRI6I/ref=sr_1_1?ie=UTF8&qid=1395552748&sr=8-1&keywords=spdif+to+rca
THEN connect the female rca from that small box to this:
http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE/ref=sr_1_1?ie=UTF8&qid=1395552852&sr=8-1&keywords=rca+to+3.5mm+female
Then connect your speaker's 3.5mm male cable to the female 3.5mm cable.
https://www.amazon.com/30S1-01260-Stereo-Female-Y-Cable-Connector/dp/B000I23TTE
This should do.
EDIT: Or the one I linked in my other comment, speakers can be plugged directly into that.
The one I use with the same turntable and that's quite cheap (so you can upgrade later) is the Behringer PP400 http://www.amazon.com/gp/aw/d/B000H2BC4E
Basically, the sound coming out straight from the turntable is going to be very low so you need this to amplify the sound (and ground the turntable using the weird extra cable ending with a U). Then you can connect the output of the preamp to your speakers directly in order to test it (with a cable like this one http://www.amazon.com/gp/aw/d/B000I23TTE
Depending on what you want to do afterwards you may want to buy an amp or a receiver or even powered speakers but I believe the sidebar has more info regarding this.
Amp, RCA to 3.5 female, 3.5 Bluetooth adapter
Pick an amp
RCA to 3.5 female
http://www.amazon.com/gp/aw/d/B000I23TTE/ref=redir_mdp_mobile
Bluetooth adapter
http://m.bestbuy.com/m/e/product/detail.jsp?skuId=6581843&pid=1218759758130&ep=pv-2.2.8,rc-av,av-0,rk-1
Ok. I understand what you are trying to do and it will be a bit of a pain in the wallet no matter how you slice it.
I can think of 3 ways to go:
As you can see, there really is no magic bullet for what you are trying to do with an analog signal - if your speakers and headphones were capable of digital input this would be much simpler.
If you have powered monitors, why not just get an RCA > 3.5mm Female adapter and hook the speakers to the Magni 2's pass-through? Set the speakers to near max volume and master control through the magni 2's knob.
PC > modi 2 > magni 2 > headphones
> RCA Line-out > RCA to 3.5mm Female Adapter > powered monitors
Literally this
This would do the trick for $1.24 but the cable might be a bit short. Fortunately there's a 3 foot cable that's only $6.59.
So your speakers have a 3.5mm MALE coming out of them?
If so, this is what you need:
2 x RCA Male, 1 x 3.5mm Stereo Female, Y-Cable 6-Inch https://www.amazon.com/dp/B000I23TTE/ref=cm_sw_r_cp_awd_xkyKwb16ZG5E4
Are they powered/amplified speakers? Based on this configuration, I'm guessing they are not powered, so I don't think this will work anyway as you are feeding sound out of a controller not an amp/mixer.
The word "port" just refers to the physical connections. Ports can be either inputs (they take in a signal) or outputs (which send out a signal). You're in luck though, according to the product manual (page 6) linked from the page you just provided the URL to, the ports on the side of the TV are outputs. If you want to use a 3.5mm cable connection (like for computer speakers) then this adapter (or one like it) is what you need.
So this? https://www.amazon.com/30S1-01260-Stereo-Female-Y-Cable-Connector/dp/B000I23TTE
I'm not sure I understand what you're looking for if not an adapter, there are adapters that convert rca out to any input that a speaker could take. You don't need to buy a speaker that specifically takes rca input in order to use rca equipment
Use the VGA to connect to the TV, then use a male/male audio cable with component splitter to put the audio in. This should work fine: http://www.amazon.com/QVS-CC400M-06-Male-Audio-Cable/dp/B0000932A9
http://www.amazon.com/Male-3-5mm-Stereo-Female-Y-Cable/dp/B000I23TTE/ref=sr_1_6?s=electronics&ie=UTF8&qid=1345390595&sr=1-6&keywords=audio+component+adapter
Sure. The audio can be a little tricky but here is what I have. The easiest thing would be if your home theater system or tv accepted optical inputs so that you could use the xbox's built in optical and connect if directly to your tv or home theater system without doing any conversions. If that does not work you have to convert the optical to a 3.5mm connection or a rca audio connection (these are the red and white components next to your dvi connection) . The way to do that is by way of adapter or cords. Like others have stated adapters might give you latency problems. So a cord might prove the better way to go. Ultimately for your connection it looks like you will have to go from optical to 3.5mm to RCA audio. Conversely the newer controllers have a 3.5mm connection built into it. So you would just have to go from 3.5mm to RCA audio.
I'll try to find links but hopefully this gives you a starting point.
Edit
Start with this or {this + this} then convert that signal to RCA with this
-In theory this should work
Depends on the TV. Most TVs have audio out either with Toslink (digital) or RCA (analog). Although I've seen headphones with Toslink they're specialty items so I'm going to assume you need analog.
In that case you'll need this: RCA Stereo to 3.5 Stereo Adapter
This assumes the headphone have the standard 3.5mm mini plug which would be on most devices that plug into phones or MP3 players.
^
I can't seem to edit my post right now (on mobile).
The adaptor should be female like this... http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE
I mean there is certainly potential for that?
I don't know how the optical out would convert (especially if you are going wireless) to say analog--then to bluetooth.
From HDMI to your HDTV, I would assume it has red/white out. I just recently bought a new TV that had, per usual, crappy sound. I happened to have a RW to 3.5mm female converter lying around, and I connected a decent pair of PC speakers. They work super well, and put out the right kind of sound depth I need.
I wouldn't be surprised if you could slap a Bluetooth transmitter on the end of that, and it would work? Those converters are only like two bucks on amazon, and they're useful for other things too, so its not like it would be a big hit on the wallet since you already have, I assume, the BT transmitter as well.
EDIT: Just for reference, here is the cord I'm talking about.
http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE/ref=sr_1_2?ie=UTF8&qid=1420062412&sr=8-2&keywords=RCA+to+3.5+mm+female
That was my problem too in the beginning. This may get a little long, but I can definitely help you out.
Elgato has page to help with this issue
I use the original Elgato HD and at first I had a headset with a USB and 3.5mm headphone jack, so I had to make a little jerry rig setup with a splitter and an audio Y cable
But if you are willing to spend some money, I highly recommend getting this headset
Its what I am using now because I can talk to my teammates in game, hear my tv audio, and listen to music or donation goals on my PC since it has a multi media source input.
I hope this helps.
So, the HDMI is going into one of the two HDMI in slots right?
And there isnt any sound?
Then get a 3.5mm cable, stick it in the headphone jack and use a 3.5mm audio to RCA splitter and plug it into the coressponding white/red input for the HDMI slot selected.
You can use the Chat Link on the original HD. But you'll need a 3.5mm to stereo RCA adapter to connect it to the Analog audio inputs of your HD.
https://youtu.be/ZkI4UVzPxzw?t=129
Like this: https://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE/ref=sr_1_3?ie=UTF8&qid=1446597460&sr=8-3
what about a Y cable into the speaker/rca out (red and white) to a 3.5mm female jack? This
Ok, this solution is a bit tricky, so bear with me.
If you're playing an Xbox 360, here's how the cable output should look normally:
Xbox 360 -> HDMI -> Elgato -> HDMI/USB -> TV/PC
Right?
Well you can leave all of that plugged in, and also plug in this into the Component slot, and then this into the Component input, with your headphones plugged into the 3.5mm jack.
I drew a diagram while figuring this out, so here is that.
I can't seem to find something similar for a Playstation, but I might not be looking for the right things. In any case, if nothing else works, you could always try just buying a cable hub. Every console plugs into it, and it outputs to headphones, the cap card, and the TV.
fasterZ already posted it, but here - the red/white plug into the outputs on the back of the RMX, and the female 1/8" end is where you plug your computer speakers.
>Cons: Heavy.
For some reason I cannot stop laughing. Reminds me of this review about RCA-to-3.5mm audio output.
Here's the actual product page.
http://www.amazon.com/Monoprice-Toslink-Audio-Adapter-Xbox-Slim/dp/B009GUO15K/ref=sr_1_1?ie=UTF8&qid=1370216888&sr=8-1&keywords=xbox+monoprice+audio
That and this:
http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE/ref=sr_1_3?ie=UTF8&qid=1370216986&sr=8-3&keywords=rca+to+3.5mm
So that speaker system already has an amplifer built into it, and adding an external one will not help. You will however need a phono preamp between the RCA output of the table and the speaker input. So:
RCA from table -> RCA input on phono preamp -> phono preamp -> RCA output from phono preamp -> adapter -> control pod on speaker system.
So you need a phono preamp, and an RCA male to 1/4" TRS female adapter.
That turntable is pretty good for its time/price, though you should probably replace the cartridge and/or stylus.
I believe Zombait is correct, but it can fixed with a simple converter(here). However, with this you'll also need an RCA to 3.5 adapter.
With this set up, you should be able to get stereo in your headphones.
For non-simultaneous playback:
Here's what you could do:
Buy one 3.5mm Stereo Male to Two RCA Male Splitter Cable, and one 2 x RCA Male, 1 x 3.5mm Stereo Female, Y-Cable 6-Inch. Also get a 3-Way Audio Video AV RCA Switch Selector Box Splitter. That all together is $9.82 US.
Connect the xbox to your TV as normal. Use the RCA cable included with the splitter to connect your TV's audio output to the Splitter's Input 1. You don't need to connect the yellow video connection on that cable. Then use a male 3.5mm Stereo to RCA cord to connect your laptop/iphone's headphone jack to the Splitter's Input 2. Plug the 2 x RCA Male, 1 x 3.5mm Stereo Female, Y-Cable 6-Inch cable into the Splitter's Output, and connect your headphones to the 3.5mm female end. You should then easily be able to switch between ipod/laptop and xbox/tv sound feeding to your headphones by adjusting the splitter's output switch. This is a very basic setup, but should achieve what you're going for as long as you didn't want the two inputs playing simultaneously.
For simultaneous playback:
Here's what you could do (I admit this is probably a bit of a wrap around way of doing it, but it was fun to come up with):
Buy:
Two Behringer MICROMIX MX400 4-Channel Mixer, one 3.5mm Stereo Male To 2 RCA Male Cable, one Male RCA to male RCA cable, one male RCA to female 3.5mm cable, six 3.5mm to 2RCA female adapter, and six 1/4 inch to 1/8 inch stereo jack adapters. This setup without shipping and handling costs $75.55 US.
This thing only outputs in mono though, so it doesn't benefit your headphones greatly (only one side will play sound). This is why we're gonna get two of them though, and this is the fun part. Check out this picture: http://i.imgur.com/UPMX5j2.png. It has the steps included with a crude illustration. The benefit of this setup is that you can have the ipod/laptop coming in at a different volume than the tv/xbox. Also has space for two more inputs if your ever have more you want to plug in (or to allow a laptop and ipod to be plugged in at the same time).
I... I think that setup would work.
What's the difference between using the headphone output and the preamp output with a cable like this on my Schiit Vali 2 (on a pair of headphones)?
You need to find a way to hook up the the system using your RCA outs. That might require getting back behind the sound system to swap out the 3.5mm headphone to RCA cable that's already plugged in for a regular RCA to RCA cable. Alternatively, you can snag yourself a cable like this one to go from your controller to the Aux cable of the system.
What do those RCA plugs AUX on the subwoofer do, are they an input or an output? The two amazon things you'll need, the cable you have won't fit with the green one though, it's all males (you'd need one like this instead this But if those are inputs, you're better off just pugging a straight male to male RCA cable
I do not know what you have but this
http://www.amazon.com/Digital-Optical-Coaxial-Toslink-Converter/dp/B007S6U7I4/ref=sr_1_3?ie=UTF8&qid=1405136588&sr=8-3&keywords=digital+audio+to+rca+adapter
and you might need this
http://www.amazon.com/Male-3-5mm-Stereo-Female-Y-Cable/dp/B000I23TTE/ref=sr_1_1?ie=UTF8&qid=1405136677&sr=8-1&keywords=rca+to+femail+to+3.5mm
If your headphones use the standard plug, then you need a 2 RCA male 3.5mm female adapter. Here's one with decent reviews from Amazon
The PS4 only supports digital connectivity (old school analog A/V plugs have finally bitten the dust). So for video, it sounds like you're good -- HDMI will work great, as you mentioned your monitor supports it (alternatively an HDMI to DVI setup would also work for a monitor).
But for audio, that's another story... The PS4 uses digital / optical audio cables (also known as a TOSLINK connection). You need a decent speaker system for this type of connection. You mentioned that your monitor doesn't even have speakers (does it have an audio out port though? if so, you may be in luck and can just plug a pair of cheap computer speakers or headphones in). Otherwise, you pretty much only have three options:
http://amzn.com/B004C4WPXA), along with a digital / optical (TOSLINK) audio cable and an [RGB-to-headphone style adapter](
http://amzn.com/B000I23TTE). From there, you can get a cheap set of computer speakers (even something simple like these would work). Attach the cables together and plug in the speakers and boom -- you'll have sound. (Note: if the PS4 is anything like the PS3, you'll need to enable "multi channel output" under its sound settings.)
http://amzn.com/B002V3R2SM) I could find on Amazon that supports it -- it's a surround sound / DVD Player combo, in case you're interested.) You'll also need to buy a digital / optical (TOSLINK) audio cable, of course, which I linked to in the above example.
Thanks for the reply.
My subwoofer only has a single 3.5 female input, would that mess anything up? I plan on getting this and using a 3.5 male to male to connect to the subwoofer.
No, it's not possible.
Just do this:
https://www.amazon.com/gp/product/B002P35JMO
https://www.amazon.com/gp/product/B000I23TTE
It's way easier than trying to mod something and less than $10.
If you've got the slim xbox, I recommend, Monoprice RCA/Toslink Audio Adapter and 2 x RCA Male to 3.5mm Stereo Female and then of course, just plug in your HDMI to monitor. Both extremely cheap(technically can even go about a dollar cheaper on the RCA cables, but shipping would be longer).
Total = $7.66
See where it says av out? If you want to test using headphones you need to buy this adapter http://www.amazon.com/gp/aw/d/B000I23TTE/ref=mp_s_a_1_3?qid=1397524631&sr=8-3&pi=SX200_QL40
Because you can buy these for $1.50. Most tv's over $1,000 usually have them, whereas a cheaper tv will not to save a little bit on cost.
Hooking the Modi up to my PC for use would just be as simple as using a y-adapter like this, correct? Since it just plugs through USB?
http://www.amazon.com/StarTech-DVI2HDMIA-Video-Converter-Audio/dp/B005G3VQ5E
+
http://www.amazon.com/3-5mm-Stereo-Audio-Adapter-Female/dp/B000I23TTE
Had a guy at radioshack help me out with this.
http://www.amazon.com/Male-3-5mm-Stereo-Female-Y-Cable/dp/B000I23TTE/ref=dp_cp_ob_e_title_1
That's the main component, I also got an extended cable so I needed a male-male connection in addition. The entire set up cost me about 25 bucks. Using a pair of $25 skull candy's and the change was night and day for me.
OR you can use a phono pre-amp with a receiver which does not have phono input, this is the case with most newer receivers.
You are correct, the speakers must hook up to either the amp or receiver. If you are using computer speakers you'll need a converter [like this] (http://www.amazon.com/Male-3-5mm-Stereo-Female-Y-Cable/dp/B000I23TTE?) and ensure the amplifier or receiver you choose has RCA output.
Like this: one cable
Or this: needs m/m rca cable only
Or this: just the adaptor you made
and for giggles: you only need the m/m phono cable
NP! You’ll want something like this to convert from RCA to 3.5
https://www.amazon.com/dp/B000I23TTE/ref=cm_sw_r_cp_api_i_thZTCb68T52MS
As far as recording, AudioShare seems to be the best. And it supports copy paste into into apps like GarageBand and Gadget
That's what I am thinking. Seems like this makes sense:
3.5mm Audio Splitter into Computer -> 3.5mm - 50 ft -> 3.5mm to RCA Adapter -> Analog to Digital Adapater -- like you recommended -> [Audio Optical Cable into TV]
My only question is that a lot of these converters show a TosLink port, and I do not have knowledge of what that is compared to a SPDIF. Are they compatible, or...?
Buy [this](HDMI Audio Extractor Splitter, One HDMI Input to HDMI Output + Optical SPDIF and RCA L/R Audio Out https://www.amazon.com/dp/B01I9JG70A/ref=cm_sw_r_cp_api_DKLZzb7M8448H).
I personally do not know if this work but technically it should. Might need another hdmi cable if you don't have one to go from the converter box to your monitor.
Then buy [this](C&E 30S1-01260 2 x RCA Male, 1 x 3.5mm Stereo Female, Y-Cable 6-Inch Gold Plated Connector https://www.amazon.com/dp/B000I23TTE/ref=cm_sw_r_cp_api_5MLZzbS8E0JJG). Then you should be able to plug in your headset.
I am currently using this coupled with an adapter like this: https://www.amazon.com/30S1-01260-Stereo-Female-Y-Cable-Connector/dp/B000I23TTE/ref=sr_1_6?ie=UTF8&qid=1504642923&sr=8-6&keywords=rca+aux+adapter
you need this connector, fam: http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE
basically any male RCA to female 3.5. you can get one in literally any shop that sells TVs, speakers, or audio devices (fryes, microcenter, radioshack, walmart...)
your TV has two audio out RCA ports (google them / RTFM), connect your adapter, red to red, white to white, then connect your male 3.5 to the female port
enjoy :)
edit: fixed link so it didn't have any partner referral links
7.1 "surround sound" is not a real thing for headphones. It's just stereo headphones that manipulates the left and right speaker to sound like the sound is coming from different directions. So, with that said, you just need to figure out how to plug in your headphones any way possible. So if your TV or monitor has a 3.5mm jack use it, if you're using a normal TV with old A/V cables, you can use something like this: http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE/ref=sr_1_1?s=electronics&ie=UTF8&qid=1449155343&sr=1-1&keywords=av+cable+to+female+3.5mm+jack
to get sound.
Depends on your tv. The PlayStation itself doesn't have a 3.5mm out, but your tv might. Also if your tv has rca out you can get an adapter for that here
That puts out a phono signal, not a line signal, right? Couldn't tell exactly from the quick googling. All you would need is a phono stage/pre-amp and then you could adapt the 1/8" TRS plug to RCA with a cable. It might even sound alright!
Check Amazon for phono pre amp and get one that fits your bud'...
http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE/ref=sr_1_1?ie=UTF8&qid=1452307792&sr=8-1&keywords=headphone+rca+adapter
http://www.amazon.com/rolls-VP29-Phono-Preamp/dp/B0002BG2R2/ref=sr_1_4?ie=UTF8&qid=1452307834&sr=8-4&keywords=phono+pre+amp
For example
If you have a pair of decent headphones you could pick one of these up, and hook that up to your TV audio out (if it has one) then tape your mic to the outside, and set voice to play through your speakers. Voila, DIY Turtle Beach/Tritton headphones! :)
You can use both the HDMI and composite out ports on the back of the xbox, at least I've done it in the past with the old white xbox, not sure if it will work on the new one. Either way, just use a pocket knife or screwdriver to pop the plastic cover off of end of the composite cable that you plug into the xbox. That will save you the couple dollars for the special audio adapter that GearGuy2001 posted, just use the one that came with your xbox, leave the video cables unplugged, and get one of [these](http://www.amazon.com/Male-3-5mm-Stereo-Female-Y-Cable/dp/B000I23TTE/ref=pd_bxgy_vg_img_b "I like tacos") so you can plug your speakers right into it.
You can output audio on the av multi out and connect your headset with this f3.5→mRCA
and this fRCA→fRCA
I checked the manual for the record player. This [2 x RCA Male / 1 x 3.5mm Stereo Female Adapter] (http://www.amazon.com/Male-3-5mm-Stereo-Female-Y-Cable/dp/B000I23TTE/ref=sr_1_1?s=electronics&rps=1&ie=UTF8&qid=1344748113&sr=1-1&keywords=2+x+RCA+Male+%2F+1+x+3.5mm+Stereo+Female) should accomplish what you are trying to do. You can just buy a 3.5mm male to male cable for whatever length you need from amazon also.
I did a little Googling and found a quick and dirty way to accomplish this:
Connect your optical line to one of these.
Then, connect one of these things to it.
Finally, hook up one of these guys.
Hopefully that helps!
Cool. You'll need an adapter like this if the TV has RCA jacks, but it's not expensive. I have a few years old Visio and it does have the variable output, but make sure yours does too.
I doubt the USB to 3.5mm adapter will work on the XB1. However, I think you can accomplish what you're looking to do with one of these:
HDMI Audio Extractor
and one of these:
RCA Male to 3.5mm Female
EDIT: So I think I misunderstood what you were doing with the adapter. I didn't even know such a thing existed, but as long as you're not plugging the USB speakers directly into the XB1, I think you'll probably be OK. The above suggestion should still work as well if not.
Analog to Digital Converter
3.5mm to Male RCA
This is basically your option outside of buying a new soundbar or TV. Also look into some of the budget speaker setups on this subreddit. It will absolutely kill any soundbar you purchase. Not going to totally shit on you for getting a soundbar like everyone else in the sub but MB42X and a cheap amp off of accessories for less is an awesome beginning to a budget build.
So you will run a 3.5mm jack to RCA cord into the Analog to Digital Converter then the optical out of the converter into the soundbar.
These converters can be a little hit or miss with my experience so look around to find the one with the best review. I find monoprices stuff is pretty good. If it doesn’t work maybe try a little more expensive and reliable one.
If you already have a 3.5 you can find an adapter online for 3.5mm female to male RCA
Which is this
Can I instead just use the audio coming from the DS4 with headphones? Or should I buy [this] (http://www.amazon.com/dp/B004C4WPXA/ref=cm_sw_su_dp) and have [this] (http://www.digitaltrends.com/wp-content/uploads/2012/01/turtle-beach-ear-force-x12-review-cables.jpg) hooked up whilst using [this] (http://www.amazon.com/dp/B000I23TTE/ref=cm_sw_su_dp). I know it's pretty much what you said above, but still.
The mixtrack uses RCA. I'm not too sure about the Bose speaker, I tried using an adapter http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE/ref=sr_1_7?ie=UTF8&qid=1420920190&sr=8-7&keywords=rca+adapter+splitter+2+female+1+male
But the Bose component was too big and didn't work right.
Most TVs do not have a headphone jack as an audio output. Many do however have stereo output via phono (RCA) jacks. You could purchase an adapter like this: http://www.monoprice.com/Product?c_id=104&cp_id=10429&cs_id=1042902&p_id=7198&seq=1&format=2
Then you could just plug headphones into that, or an extension cable with the headphones. They also make those in cable form: http://www.monoprice.com/Product?c_id=102&cp_id=10218&cs_id=1021815&p_id=5598&seq=1&format=2
That particular one would need an adapter from male to female to allow you to connect headphones.
Here is one more, you could plug headphones into the cable and the cable into the TV: http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE/ref=sr_1_9?ie=UTF8&qid=1421715646&sr=8-9&keywords=rca+1.8
Also, some TVs allow you to disable the internal TV speakers, some do not. Some will adjust the volume on the output with the TVs volume, some will not. Also doublecheck that the RCA output is analog and not digital (I'm fairly sure most are)
Hope this helps.
Black = Rear left and right.
Green = Front left and right.
Orange = Center and Subwoofer.
You need a cable like this
Connect to the green cable.
If you can return/exchange your audio converter, you might get something like this instead so that you can take advantage of your subwoofer and surround capabilities -- I don't know (nor have I used) the particular one in the link, it is just here as an example of the type.
Thanks for the reply!
Do you think these would be better?
Is this the cable you're referring to? And I would have to get a male-male 3.5mm headphone cable right?
Ok, so you have 2 audio out ways. The first is optical. This is much better, can do surround sound etc, but isn't exactly headphone friendly, so scratch that. You also have RCA out, which can easily go to a headphone, so here is what you will need.
First up, you need an adapter to convert RCA to a headphone. You might have one hanging around as some mp3 players, etc, comes with them. If not, Amazon has it for 1.46 with free shipping. You can also get them at bestbuy/walmart/etc, but they will likely cost at least $20. Once you have it, you can plug it into the red and white "audio out" ports on the bottom back panel. the closest 2 rca ports to the ethernet cable, and right next to the headphone port (to bad it is only audio in, for from PC's).
Ok, now you have a headphone jack, time to get headphones. You get a bit of choice, as now you just need wireless headphones. This is also where most the money will be. Personally, I would get something like this from amazon or this from ebay. This lets you use any bluetooth headphone with your TV, thus the headphones will work with your phone, etc, and be of more use. If you do go this way, you can get cheap headphones like this all the way up to very good ones. Whatever you want.
If you don't want to mess with bluetooth, or it is too much, you can just get this from ebay for cheap, or this one from amazon. They will both work, though won't be as useful, and likely won't sound as well as the bluetooth ones. Also, if you get the amazon one, it can actually directly connect to the rca output, so that is a plus :).
TLDR: If you want the cheapest way, just buy this. Though not the best, it should do exactly what you need.
So if my headset connects using a 3.5mm jack, would I need to buy a RCA male to 3.5mm stereo female cable to plug into the back of the SB2?
https://www.amazon.com/30S1-01260-Stereo-Female-Y-Cable-Connector/dp/B000I23TTE pop one of these into the rcas on the back and you’re golden
This is the correct RCA to aux cable you would need to plug your green end into.
I still highly recommend you get yourself a pair of RCA to RCA cables and RCA to XLR cables if you plan on djing at house parties / events where you will need to provide your own equipment outside of speakers.
You wouldn't have to fiddle with anything if you buy:
This
Paired with This
you'll probably have to use something like this with an adapter cable however you may have to run this through an amplifier.
or maybe one of these but you'll need an inline volume control on your headphones.
There are a number of solutions available. My assumption is you are looking to use the external computer speakers you have currently without investing in a larger sound bar or AV receiver type solution. I also assume those external speakers are connected to the headphone jack (3.5mm) on your computer.
Basically you need to get the audio out of the HDMI signal from the cable box/console. Unfortunately it doesn't look like that Sony model has an audio loop out of the HDMI audio (that would be the best way). If you are lucky the next easiest solution is something like this:
http://www.amazon.com/Male-3-5mm-Stereo-Female-Y-Cable/dp/B000I23TTE
A simple RCA to headphone adapter. I know with the cable box I own, all the outputs are live. Meaning you can plug into any of the analog audio outputs (RCA L/R). One thing to note is that this may not work even if those outputs are live. Sometimes HDMI has a processing delay at the cable box or the projector. So the audio may be off by a few frames or more.
I do not know if that would work for a game console. If it only has HDMI out then you would need an active device to extract the audio, and at that point you probably are spending close to a nicer sound bar type solution. If the console has component outputs it may be easier to go analog (RGB RCA connectors and RL RCA audio). You would need a VGA to RCA adaptor cable for the projector as well then:
http://www.amazon.com/VGA-RCA-Component-RGB-Cable/dp/B003DSC96E
(this analog solution would also work for the cable box)
For the Wii or game cube, both of those are just standard composite video with analog audio so the above audio adapter would work.
I actually use computer speakers on my TV at the moment. You can use a 3.5mm (headphone jack) to RCA (red and white) cable to get the sound to play through your computer speakers. No special conversion is needed, and it keeps the left+right audio the same.
A cable just like this one:
http://www.amazon.com/Belkin-Audio-Cable-Splitter-1-Mini/dp/B00004Z5CP/ref=sr_1_2?ie=UTF8&qid=1408530495&sr=8-2&keywords=3.5mm+to+rca
If your computer speakers don't let you detach the input cable, you can use this type of cable adapter instead of the first one:
http://www.amazon.com/Male-3-5mm-Stereo-Female-Y-Cable/dp/B000I23TTE/ref=sr_1_1?ie=UTF8&qid=1408530687&sr=8-1&keywords=3.5mm+female+to+rca
good advice here in this thread so far but your description leaves us all guessing a bit.
if, as I suspect, the mic does not require phantom power Then:
I think that a possibly
better solutionwould be to get a stereo mini female to two RCA Male and use the "Record In" or "tape In" RCA's found towards the right on most behringer mixers.Lika dis: http://www.amazon.com/Male-3-5mm-Stereo-Female-Y-Cable/dp/B000I23TTE
Edit: On second thought the mic probably won't have the voltage to drive that RCA tape in input without a preamp of some kind to "step up" the mic to line level
(the RCA inputs expect line level) ( maybe this would have same chance of kinda working that your 1/8 to 1/4 adapters had going in to line inputs -you would have to gain em up a lot and you would increase the noise floor)
Does your input of your channels have a mic/line switch by the 1/4 inputs --if so this gets you around that aspect of the problem --set the square up/down switch to mic and you are good with what you have (maybe )
What you really might need is a cable that will break out the 3.5 male jack into two XLR's I think (if the mic male mini jack is a stereo plug that does not involve the earphone side of your headset!) -- in this scenario , depending on whether you male plug is TRS,TRRS, or TRRRS, you might end up with one xlr having the mic signal you need going into your mixer ( yay!) and the other one "needing" to have the audio send to your earphone going into it.
Kinda Lika Dis One: http://www.amazon.com/Hosa-Stereo-3-5mm-Male-feet/dp/B000068OEP/ref=sr_1_1?ie=UTF8&qid=1407295366&sr=8-1&keywords=xlr+to+mini+stereo but with a female on the 1/8 side -- an 1/8 Stereo "barrel" would convert the one shown to the right gender
Well, assuming you already have composite video cables and 3.5mm -> 3.5mm audio cables around, you could buy this:
http://www.amazon.com/HDE-Female-Composite-Stereo-Adapter/dp/B00CIC9KW2/ref=pd_bxgy_e_text_y
And pair it with this:
http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE/ref=sr_1_7?s=electronics&ie=UTF8&qid=1410901299&sr=1-7&keywords=rca+y+cable
And you've essentially recreated the original ports found on the Raspberry PI B.
I'm looking for a setup that can combine the audio outputs from 2 PCs into one output that goes into my headphones (AT m50X). I recently bought this which I now realize doesn't support stereo. Can anyone suggest a cheap (under $25) way to accomplish what I want with stereo?
Edit: would this and these do it?
No headphone jack. It does have an analog audio out now that I check again :/, I was confused. The back of the TV is here: https://drive.google.com/a/umich.edu/file/d/0Bxb-BPXcJ-11bVdQcU1xLUswZVE/view
If that is the case, would something like this work: http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE/ref=sr_1_1?s=electronics&ie=UTF8&qid=1462557036&sr=1-1&keywords=analog+to+headphone+jack
These two items will do the trick:
You can find them on eBay, too. Also, I wouldn't recommend plugging headphones directly into a device like this; the signal will be at full volume (I'm pretty sure) and you won't have any way to turn the volume down. And those RCA outputs (red and white jacks) on the first item won't work if the audio signal from the HDMI source is more than 2 channels (like surround sound or something).
And in case you didn't know, the reason you need a special device like the one above is because the audio signal that travels inside the HDMI cable is a digital signal, and the audio you plug into speakers or headphones is an analog signal. So that device converts the digital signal into an analog signal.
sorry ill try to make it clearer.
my speakers has an 3.5 male aux cord. i bought a 3.5 mm female adapter to RCA male that i connect to my dj controller.
Speaker (3.5 mm aux) <-- 3.5 mm adapter to rca --> dj controller.
http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE/ref=sr_1_4?ie=UTF8&amp;qid=1463600114&amp;sr=8-4&amp;keywords=rca+3.5+mm+adapter
Buy something like This
This is possible, but you'll only get one channel of sound for both inputs, so you'll hear game sound in one ear and chat in the other. You'll need one of these and two of these. After you get those, connect the male 3.5mm ends to the sources, and then the red or white wires to the female 3.5mm adapter. Once that's done, you can plug in your headphones into the female 3.5mm jack and enjoy.
Tried to edit my post but not sure if it took...you may also need an adapter to connect the green L/R jack to the white L/R RCA jacks on the Sound Blaster card. Something like this...
https://www.amazon.com/30S1-01260-Stereo-Female-Y-Cable-Connector/dp/B000I23TTE/ref=zg_bs_172544_16?_encoding=UTF8&amp;psc=1&amp;refRID=PXBKG20YYA039SK5XRTQ
https://www.amazon.com/30S1-01260-Stereo-Female-Y-Cable-Connector/dp/B000I23TTE/ref=pd_lpo_267_bs_lp_t_2?_encoding=UTF8&amp;psc=1&amp;refRID=EADZ5MXWE1CRKH2ZT65E
Sweet and I found that same cable for 2 bucks http://www.amazon.com/gp/aw/d/B000I23TTE?pc_redir=1396367541&amp;robot_redir=1
maybe try this
https://www.amazon.com/30S1-01260-Stereo-Female-Y-Cable-Connector/dp/B000I23TTE/ref=pd_sim_147_1?_encoding=UTF8&amp;psc=1&amp;refRID=CYZXTPQEG515H3FTWFJS
Never used one, but judging from the outputs on the back you should be able to hook it up to computer speakers with either this or this. The first cable would probably do the trick.
The most least expensive method I can think of is for you to play the FLAC files on your computer or phone and share the sound to your receiver/amp via bluetooth with something like this...
http://www.amazon.com/Portable-Bluetooth-Receiver-Speakers-Headphones/dp/B00EUWRBH4/ref=sr_1_3?s=electronics&amp;ie=UTF8&amp;qid=1451785742&amp;sr=1-3&amp;keywords=usb+player+for+home+stereo
... you will also need one of these adapters since I'm guessing your receiver/amp will only have RCA type inputs and no 3.5 stereo jack imputs.
http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE/ref=pd_bxgy_422_img_2?ie=UTF8&amp;refRID=0H9DEP858GN60B5WHX4T