Reddit Reddit reviews 2pcs 2.4G 5.8G FPV TX Antenna RPSMA Male Dipole Whip FPV Antenna for FPV Multicopter Racing Drone Quadcopter

We found 20 Reddit comments about 2pcs 2.4G 5.8G FPV TX Antenna RPSMA Male Dipole Whip FPV Antenna for FPV Multicopter Racing Drone Quadcopter. Here are the top ones, ranked by their Reddit score.

Toys & Games
Hobbies
Hobby Remote & App Controlled Vehicle Parts
RC Radio Transmitters
Hobby Remote & App Controlled Vehicles & Parts
RC Radios & Parts
2pcs 2.4G 5.8G FPV TX Antenna RPSMA Male Dipole Whip FPV Antenna for FPV Multicopter Racing Drone Quadcopter
Parameter: Connector: RP-SMA Male; Length: 4cmp; Antenna gain: 2dbi; Impedance:50ohm; SWR: = 1.5Frequency Range: The drone antenna with frequency range of 2400-2500MHz,4900-5900MHz.Omnidirectional antenna: Dipole Whip Antenna suitable for 2.4Ghz 5.8ghz transmitter and receiverWell-performance fpv antenna: The antenna with low feeder loss, more steady gain and stronger signal.Compatible : The wifi antenna working great on PC motherboard and FPV quadcopter.
Check price on Amazon

20 Reddit comments about 2pcs 2.4G 5.8G FPV TX Antenna RPSMA Male Dipole Whip FPV Antenna for FPV Multicopter Racing Drone Quadcopter:

u/gummybur · 24 pointsr/sffpc

Build Pics

Setup details:Monitor: Acer KG271USpeakers: Logitech z506KB: Tecware Phantom w 3rd party keycapsMouse: Razer Mamba Elite & Razer scarab mousepadCase: SM550

Build Details:
MB: Asus ROG Strix B450-i gaming
CPU: R7 3700x
CPU cooler: Cryorig C7G + NF-A9x14
Ram: Corsair Vengeance RGB 3200Mhz CL16
PSU: Corsair SF750 Plat
GPU: EVGA RTX 2080 Gaming XC
Additional Case Fans: 2x Be Quiet! Silent Wings 3 Pwm

Notes:

  1. Inserting MB before fans is easier in the SM550 (contrary to the manual)
  2. 2x Silent Wings 3 were from previous build but they are waaay louder than the small NF-A9x14
  3. The motherboard forces fans to go to 100% at 75 degrees, anyway to circumvent this?
  4. Wifi/ BT antenna on the asus b450-i is kinda ugly, need suggestions for replacements
  5. 3700x idles at ~50 and ramp up to 70-80 in games. Voltage jumps around 0.9-1.4 in idle but stays above 1.4 while gaming. Before disabling iCUE, Razer Chroma SDK, Razer Synapse and ASUS Aura sync, voltages were contantly 1.4v and up in idle
  6. Sliger gives an option for:- internal 20pin- USB A and USB C- internal 20pin to USB A and internal type L to USB CGo for the former with an AMD mobo cos they dont have the internal type L socket for the individual type C port like on Intel mobos. Mine got shiped with the latter so I cant use my front type c port :( Need the new silverstone CP14 connected for the USB C port on the front panel or the new front panel IO for it to be useful
  7. Didn’t add the GPU and supp mobo cables into pslate customs order! Have to wait till he takes orders again

    Questions:

  8. Any suggestions on Wifi/BT replacements for this mobo?
    1. Currently looking at this antenna from huacam and this unbranded antenna
  9. Any way to raise the thermal cap of the mobo to more than 75 degrees to stop fans ramping up so often?
    1. Stop gap measure is to set case fans to motherboard temperature, but under gaming loads CPU goes up to 80 degrees yikes gonna play more with fan curve
    2. Using noctua silent fan adapter works to cap max volume but ramping up is still an issue
    3. Noctua fan controller looks abit too big to fit into the case and cablemanagement would be quite messy
    4. Tried installing AI suite III and it crashed my com =/ don't really want to pay for software like argus monitor either
  10. Are the temps and voltages for the CPU normal? Been getting conflicting/ confusing answers on the r/AMD threads
    1. TLDR they are normal
    2. Tried reducing PPT but temps and voltages are still similar, will look more into it
  11. Will Sliger cases sell their internal 20pin to USB A and USB C header separately? (SOLVED)
    1. They do but will prioritize sending out current case orders first

      Overall pretty happy with the build quality and how the theme turned out. Black/gray with orange highlights :) Eagerly waiting the NF-A12x25 and NF-A9x14 chromax fans!!! (If we DO get them lol)

      (edit: added more info)(edit 2: added responses and findings)
u/SloppyCandy · 17 pointsr/sffpc

I use these wifi antennas. No real numbers to back them up but they seem to work and stay out of the way https://www.amazon.com/dp/B071LMRK36?ref=ppx_pop_mob_ap_share

u/SpectralRaz · 9 pointsr/sffpc

Album Link

This is the Velka 3 v1.1 in Grey


---
This is my very first SFFPC build. I am coming a Fractal Design Nano S. This Velka 3 is Tiny! I did some small amount of basic modding to make it look like I wanted it. I replaced the 16mm Anti-Vandal switch that came with it for one that has an led for power. I wrapped the psu cables in an automotive cloth wiring harness tape so you couldn't see the bright psu cables from the original. I taped over the Velkase Fans to hide the colors of the stickers and cables as well. I also used the small quadcopter antennas.

---

Specs:


| Part | Price | Purchased at |
|:-----------|------------:|:------------:|
| Ryzen 5 1600| $65| hardwareswap
| MSI B450I Gaming Plus AC | $130| Amazon
| 8GB x 2 Crucial Ballistix Sport 3000MHz | $66| Amazon
| EVGA GeForce GTX 1060 SC 6GB | $110| hardwareswap
| FSP 400w Flex ATX PSU | $90| Amazon
| Reeven Vanxie 34mm Tall | $20| Newegg
| Samsung EVO 970 250GB| ($70 otherwise)| Previous Build
| Velka 3 Grey| $80| Velkase
| 2 x VF-8010-PWM 80mm x 10mm| $20| Velkase
| Velkase-LiHeat 300mm Riser | $40| Velkase

---

Notes


Replacement Power Switch

  • For the Replacement LED I chose this one from Amazon in White color. I snagged this to create the harness. Using Shrink tube and Cable Sleeving and some solder to attach it to the switch.

  • For those of you interested in the space that the PSU has heres a close up with how close it to the power switch.

    CPU Cooler

  • I chose this cooler just to try. This was way before the Black Noctua NH-L9 Released. I replaced the fan with a Velkase fan because its all black and has the same dimensions and also has a higher RPM. So far the temps have been good. My CPU isn't stressed while gaming (1080p 60hz). I think I turned on game mode in the bios and the CPU is at 3.4Ghz on all cores. The cooler is rated for 65W TDP.

    Case Fans

  • For those interested in the 80mm x 10mm clearance heres a photo of close they come with the motherboard

    Velka 3 Sidenotes

  • So just a small side note the case came with plenty of M3 Screws BUT I noticed that some are different styles. There are two types. Ones that are longer, and have a smaller phillips socket. And ones that are shorter and a larger phillips socket. The shorter ones actually are shallower and they don't protrude on the sides of the case as much. I used these for the exterior panels. The longer ones I used for mounting all the internals as they had more "bite" to hold everything together
  • It also came with a prototype of the pico psu blanking plate for the PSU. Response from Michael on this exactly "the PSU cover is just an experimental part with limited use, so it is not mentioned anywhere. If the direct plug in HDPLEX 200 (not yet tested) physically fits into the case, then the PSU cover can be used with it. A PicoPSU from MiniBox can be used as well, but only if you correctly drill two small holes around the smaller circular opening in the plate."
  • One thing I want to point out is with my particular case it had a blemish on the side panel. Not sure why but its noticeable when looked at closely. There's one on both sides in the same spot but this on is the most noticeable and more noticeable in person
u/Aranii1187 · 5 pointsr/sffpc
u/armintehgreat · 4 pointsr/sffpc

https://www.amazon.com/dp/B071LMRK36?ref=ppx_pop_mob_ap_share

These have worked well from me, and are pretty small

u/[deleted] · 3 pointsr/sffpc
u/Twigman · 3 pointsr/sffpc

I ended up buying these tiny antennas from Amazon. Performance has been the same as the stock antenna so far, but my PC is in the same room as my router so signal strength isn't really a problem for me. Aesthetically, they are perfect in that they are so tiny as to be basically hidden amongst the cables plugged in the back.

u/ikjadoon · 3 pointsr/sffpc

I used these:

Makerfire 2pcs 2.4G 5.8G FPV TX Antenna RP-SMA Male Dipole Whip FPV Antenna for FPV Multicopter Racing Drone Quadcopter https://www.amazon.com/dp/B071LMRK36/ref=cm_sw_r_cp_api_i_7E-8AbSHNSN3C

Way better than the standard ASRock one on my Z370 Fatal1ty and much smaller, too. Don’t ask me how that’s possible. 😂

5GHz is especially good with these. Ask me tomorrow and I’ll check what my link speeds are, if it’ll help. FWIW, I’m behind a 6’ tall mirror and two interior walls, plus a hallway. In total, maybe ~25 feet away from a Synology RT-2600ac with both bands active on a 100Mbps Spectrum package.

u/Zolor23 · 3 pointsr/sffpc

These are the ones I use on my Gigabyte Aorus B450i mobo - 2pcs 2.4G 5.8G FPV TX Antenna RPSMA Male Dipole Whip FPV Antenna for FPV Multicopter Racing Drone Quadcopter https://www.amazon.com/dp/B071LMRK36/ref=cm_sw_r_cp_api_i_4a5ODb60E28V4

Works very well

u/The_Geoff · 3 pointsr/sffpc

I use these. They are tiny but work well, my router is on the floor above me and I've never had a problem with these

u/dreadrockstar · 2 pointsr/sffpc

I use ones that are used for drones. My gigabyte z390 mini itx has the the connectors close too. 2pcs 2.4G 5.8G FPV TX Antenna... https://www.amazon.com/dp/B071LMRK36?ref=ppx_pop_mob_ap_share

No problem with antennas at all. I mostly use Ethernet so wasn’t concerned about the look. Good luck.

u/LoneKrafayis · 1 pointr/ASRock

You can use almost any Male RP-SMA antenna that claims to work with the frequencies that matter to you. This is usally means that it claims to work in the 2.4 and 5 GHz range.

The almost is due to the close proximity of the two connectors. They will not be able to accommodate antennas with larger connectors.

These small and cheap ones work, but might not give the full range.

u/thescreensavers · 1 pointr/sffpc

For 55$ nope :D cheap short antennas exist for example. https://www.amazon.com/gp/aw/d/B071LMRK36?psc=1&ref=ppx_pop_mob_b_asin_title

I know that's not what you were looking at but just fyi

u/bizzy11 · 1 pointr/sffpc

Maybe these?

u/DiscoBandit8 · 1 pointr/battlestations

Pro tip, get these to replace the big shark fin antenna

https://www.amazon.com/dp/B071LMRK36/ref=cm_sw_r_cp_api_i_Nc7DDb39NFBVB