Reddit reviews "3.5mm / 1/8"" To 6.3mm / 1/4"" Stereo Headphone Adapter"

We found 15 Reddit comments about "3.5mm / 1/8"" To 6.3mm / 1/4"" Stereo Headphone Adapter". Here are the top ones, ranked by their Reddit score.

Allows you to connect a 3.5mm jack to a 6.5mm (1/4") plug.Easy to use and provides you better sound quality with a good clarity while listening to music3.5mm Stereo Jack to 1/4" Stereo Plug Adapter blackHigh quality garunteed to work!

Check price on Amazon

15 Reddit comments about "3.5mm / 1/8"" To 6.3mm / 1/4"" Stereo Headphone Adapter":

u/The-Riskiest-Biscuit · 9 pointsr/whatisthisthing

Then you need an adapter.

3.5mm Stereo Jack to 1/4" Stereo Plug Adapter black
https://www.amazon.com/dp/B00142BZSY/ref=cm_sw_r_cp_api_i_X0-GDb00CYGPW

u/amertune · 3 pointsr/piano

It looks like there should be 2 headphone jacks on the front-left of the piano. They're probably 1/4" jacks, so you'll either need to have headphones with a 1/4" plug, or you'll need an adapter like this to connect most common headphones.

u/Cachesmr · 2 pointsr/BossKatana

This should work, but I would get something more fancy like this, because the little shits tend to break, or become loose over time.

u/SheepCantFly · 2 pointsr/Reaper

You need a 3.5mm to 1/4'' adapter if you have 3.5mm headphones and don't want to get different headphones. Like this one I think: https://www.amazon.com/3-5mm-Stereo-Jack-Adapter-black/dp/B00142BZSY

u/realhorrorshow27 · 2 pointsr/vinyl

I think you need something like this.

There's no need to have your speakers on if you're listening through headphones but it's not like it would cause any harm either.

u/mobile_monster_ · 1 pointr/Twitch

Here is the mobile version of your link

u/Fleshgod · 1 pointr/headphones

I'm not looking for headphones, but I don't feel like this deserves its own thread. I want to plug in my Sennheiser Momentum IEMs into my Magni 2 because I want to use them to listen to music on my PC and the cable doesn't reach my computer. Plus I like the volume dial.

Would something like this work?

http://www.amazon.com/3-5mm-Stereo-Jack-Adapter-black/dp/B00142BZSY

u/apaeter · 1 pointr/audioengineering

yea, I looked at the picture too. Just saw, tho, that it says "line 1" at the first input, and the stackexchange link I posted the guy said that most interfaces can deal with both line and mic level inputs.

So I think just take one of these: http://www.ebay.com/itm/3-5-mm-5FT-Stereo-Male-to-Male-M-M-Jack-Audio-Cord-Cable-PC-MP3-Adapter-/220929430795?hash=item33706b950b:g:6FgAAOxypthRxBlj

and one of these: http://www.amazon.com/3-5mm-Stereo-Jack-Adapter-black/dp/B00142BZSY

and connect your amp's headphone out to the line1 input (the input looks unusual cos it takes both XLR and 7mm jacks, just plug the jack into the hole in the middle ^(THAT'S WHAT SHE SAID!).

if you want/have to try the stereo thing: http://www.ebay.com/itm/3-5mm-Female-to-2-Male-Headphone-Mic-Audio-Y-Splitter-Cable-/371032023866 get this and 2 of the adapters (or a split thingy with 7mm jacks) and connect your amp's headphone out to both inputs - then you'll have one channel (of the 2 stereo channels) in each input, which you can then either record as one stereo track or 2 mono tracks in Cubase .

But definitely try to connect the headphone out to your PC/sound card's line in (cutting out the behringer) - if you like the sound that's way easier.

u/fight_for_anything · 1 pointr/rocksmith

I use something like this or the opposite of that 1/4" to 3.5mm depending on which cables im using at the time.

I use the no_cable patch and it works fine. USB cables may perform better, but ive never tried, and the cables I use work fine for practicing in RS and goofing off in session mode.

u/aimpad · 1 pointr/coolermaster

I just use a a standard 3.5mm to 1/4" adapter like this:https://www.amazon.com/3-5mm-Stereo-Jack-Adapter-black/dp/B00142BZSY and it works fine.

u/shinolight · 1 pointr/Guitar

You should get studio headphones(you can also use anything else but those give the best sound imo), then you need one of these https://www.amazon.com/3-5mm-Stereo-Jack-Adapter-black/dp/B00142BZSY , then you plug your headphone jack into that thing, and plug that into your amp. Your amp probably has an input where it says "PHONE" or "HEADPHONE". You plug it in there, turn your volume up and start jamming.

u/Bardstownnow · 1 pointr/synthesizers

you're going to need one of these:

https://www.amazon.com/3-5mm-Stereo-Jack-Adapter-black/dp/B00142BZSY

u/vaccin3 · 1 pointr/Twitch

Yup! Everything else should be in the box for you.

Your headphones will require a 3.5 to 1/4 converter like this http://www.amazon.com/3-5mm-Stereo-Jack-Adapter-black/dp/B00142BZSY

There are other ones on amazon, but this was the first to show for example.

u/MrBeeBee · 1 pointr/piano

I'd guess that your headphone jack adapter is mono, not stereo, which would explain the sound coming out of only one side.

Luckily a stereo adapter shouldn't be too hard to get, something like this maybe?

https://www.amazon.ca/3-5mm-Stereo-Jack-Adapter-black/dp/B00142BZSY

u/drfine2 · 1 pointr/cassetteculture

For the cable this is what you're looking for. This is the minimum you will need and probably all you will need.

https://www.amazon.com/dp/B000LMFS7M/ref=psdc_172544_t5_B000A3GPIS

For the headphone jack on the front of the recorder you might need this adapter. I have extras if you are in the USA I can send you one.

https://www.amazon.com/3-5mm-Stereo-Jack-Adapter-black/dp/B00142BZSY