Reddit Reddit reviews 3M Adhesive Remover, Helps Remove Tar, Attachment Tape & Bumper Sticker Adhesive, 12 oz., 1 aerosol

We found 12 Reddit comments about 3M Adhesive Remover, Helps Remove Tar, Attachment Tape & Bumper Sticker Adhesive, 12 oz., 1 aerosol. Here are the top ones, ranked by their Reddit score.

Automotive
Car Care
Exterior Care Products
Polishes & Waxes
3M Adhesive Remover, Helps Remove Tar, Attachment Tape & Bumper Sticker Adhesive, 12 oz., 1 aerosol
Adhesive Tar and Wax Remover quickly removes wax, grease, oil and adhesive residueIt will not harm most cured automotive paints and is also suitable for vinyl and glass surfaces
Check price on Amazon

12 Reddit comments about 3M Adhesive Remover, Helps Remove Tar, Attachment Tape & Bumper Sticker Adhesive, 12 oz., 1 aerosol:

u/IT_Chef · 5 pointsr/bestoflegaladvice

All I have to add is this:

https://www.amazon.com/gp/product/B000BQYA7W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

3M makes the most amazing adhesive remover I have ever used in my life. Spray it on, wait a few seconds, and it destroys any sticky glue. Life changing stuff.

u/silenc3x · 5 pointsr/S2000

You're better off buying new ones as you get fresh adhesive strips on the back, and you don't have to worry about fucking them up as you take them off. $20 each on amazon.

Here's what I did. Under $50, front and back emblems, including spray paint purchase.

These two emblems on amazon, front and back OEM:

https://www.amazon.com/gp/product/B00BFDH8KQ

https://www.amazon.com/gp/product/B00FSCN9US

Scuff them up with sandpaper so the paint adheres better to the smooth surface of the emblems, then. Spray paint with flat black. 4 or 5 coats with some time in between to let each one dry. I used: https://www.amazon.com/gp/product/B00XG68SMM

Then put aside and let them dry.

Onto removing your current emblems:

Get some fishing line and 3M adhesive remover: https://www.amazon.com/gp/product/B000BQYA7W

Spray the adhesive remover on the emblem on your car, then using the fishing line, work at the adhesive using a sawing motion to cut through the layer attached to your car. Once the adhesive is all cut, and you can move the fishing line around like you're flossing, you can pull it out and the emblem will pop out. In addition to the adhesive there are 2 little plastic spikes that stick into holes on your car body. That's the popping out part. You'll have to tufg at it to remove it. Some people break them, hence buying new emblems. Then spray some more adhesive remover and remove the crud left behind with a microfiber towel. If you have a lot of crud, you can use a plastic scraper like this: https://www.amazon.com/gp/product/B01HLWB0BM - or even a credit card... spray with the 3M product, scrape the crud, wipe the crud off the car, repeat. Was pretty quick and painless. Once you're all done, wipe off the adhesive remover with a microfiber towel, make sure you're all nice and clean, then peel off the plastic strips on your new emblems, put it in place, and viola. 10 minutes tops, not including the spray painting.

It should be at least 55-60F temperature to apply emblems properly. They won't stick in colder weather.

Good luck. Simple and easy upgrade. 15 bhp to the wheels.

u/Arcoril · 3 pointsr/AutoDetailing

Seconded for 3M Adhesive Remover. I've tried a bunch of stuff and hands down this is the best.

u/Guygan · 2 pointsr/DIY
u/WorkPlayDrive · 1 pointr/Challenger

It's pretty simple, park the car outside on a warm day 75F or warmer then using a blow dryer on high heat up the badge and the fender near the badge until it's hot to the touch. Using dental floss or a Luxe de-badge kit the badge slowly work it off.

​

You can easily clear the area of leftover adhesive with 3M adhesive remover, then Clean the whole area with 70% or higher rubbing alcohol. Finally use a clay bar included on the Luxe de-badge kit or can be purchased from most auto stores, this will remove any contaminants that will cause imperfections in the decal.

​

When applying the decal you will need to follow the instructions based on the brand you purchase. Some decals have air release which will be a DRY apply, while others require an application fluid (NOT SPRY WAX!!!!) this fluid is usually proper mixture water, alcohol and a mild detergent.

​

Hope that helps

u/movesIikejagger · 1 pointr/AutoDetailing

I will be removing a lot of adhesive residue from a vehicle early next week. I plan on using http://www.amazon.com/gp/product/B000BQYA7W/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 and I'll report back with how it works.

u/crookedcutsvinyl · 1 pointr/FZ09

3M Adhesive Remover. You want some good air circulation when using this stuff though.

u/Boesmani · 1 pointr/AutoDetailing

It's so strange you posted this question, because I have a similar problem. A brand new car I just bought has finger smear marks on the edges of the back window. Ammonia based glass cleaner had no effect. It appears to be some kind of dried adhesive, similar to super glue. I'm guessing it's what was used to glue the back window on and the idiots at the factory weren't careful. It's right around the defroster grid near the edge. If it was on the outside, I'd be able to use a razor blade. Unfortunately, the dealership I bought the car from is in another state. The service manager suggested 3M Adhesive Remover, but there are various part numbers to confuse me:

https://www.amazon.com/3M-03618-Adhesive-Remover-oz/dp/B000BQYA7W/ref=sr_1_5?ie=UTF8&qid=1536818222&sr=8-5&keywords=3m+adhesive+remover
https://www.amazon.com/3M-38983-General-Purpose-Adhesive/dp/B004EBNTYK/ref=sr_1_6?ie=UTF8&qid=1536818222&sr=8-6&keywords=3m+adhesive+remover
https://www.amazon.com/3M-General-Purpose-Adhesive-Cleaner/dp/B0002NUO6K/ref=sr_1_4?ie=UTF8&qid=1536818222&sr=8-4&keywords=3m+adhesive+remover

I contacted 3M about this twice and and this was their only response:

"We’re uncertain as to what the residue Is but it will likely work. If used properly I wouldn’t expect any harm to come from trying it. Use nitrile gloves: Spray it onto a clean detailing cloth and use it to remove the adhesive.

Any of the part numbers they mention should work, these vary due to package size options and volatile organic compound restrictions."

The second part to their answer doesn't make sense to me, and I'm not sure what the qualifications were of the person who responded. I responded by asking which one was the least aggressive and didn't get a response.

u/socialcapitalist · 1 pointr/AutoDetailing

I use 3M adhesive remover for this kind of thing. My wheels have adhesive tape from previous balancing weights. This stuff removed them fairly easily. I needed several applications and had to let it dwell for a few minutes each time. But it removes sticky stuff very well. If you use this, test on a small area first to make sure it's safe.

u/phineas1134 · 1 pointr/AutoDetailing

Thanks I will give that a try. I was also looking at 3M 03618 Adhesive remover. Does anyone have any experience with this or similar products? I'm mostly worried about it damaging the plastic.

u/atetuna · 1 pointr/camping

I've used adhesive remover spray. The black gunk melted right off without scrubbing. I think it's this stuff.