Reddit reviews 3M Dual Lock Reclosable Fasteners Heavy Duty Industrial Use Black TB3550 1" x 10 ft Mated Strip Indoor/Outdoor Use Great for Metal, Glass, Acrylic, PC, ABS
We found 17 Reddit comments about 3M Dual Lock Reclosable Fasteners Heavy Duty Industrial Use Black TB3550 1" x 10 ft Mated Strip Indoor/Outdoor Use Great for Metal, Glass, Acrylic, PC, ABS. Here are the top ones, ranked by their Reddit score.
INSTANT ATTACHMENT WITHOUT HOLES, No need for fancy installation tools No drilling holes or hassling with screws, nuts and bolts, or nails Eliminating holes reduces potential for corrosion or weak spotsSMOOTH AESTHETICS, Attachment with 3M VHB Tape technology eliminates any visible mechanical fasteners and improves the final look of your projectSTRONG & SECURE, 5x stronger than traditional hook & loop, 3M Dual Lock Reclosable Fasteners click together with an audible "snap" for your confidence in secure attachmentIDEAL FOR REMOVABLE COMPONENTS, sensors, lighting, devices, keyboards, electronics, monitors, access panels, POS displays, routers, and moreOPEN & CLOSE WITH EASE, Designed for opening and closing up to 1,000 timesEASY TO CLEAN, Dust? Dirt? No worries Spray with air or water to eliminate any debris, and reuseEXAMPLE APPLICATIONS, RV and Boat Accessories (access panels, headliners, interior panels, blinds, dashboards), Guitar Pedal Boards, Surveillance Cameras, Drone Accessories (battery packs, strobe lights), Power Strips, Motorcycle Aftermarket ComponentsHOW TO APPLY, Just peel and stick a piece of 3M Dual Lock Reclosable Fastener to each of the two clean surfaces you want to attach and then your two surfaces can easily be attached by pressing the 3M Dual Lock Reclosable Fastener together
3M dual lock velcro walmart carries it, way better then regular velcro
paired with some good rubberized straps itd be safe to say if the battery moved after a crash thatd be the least of your worries
My temps are fantastic.
Ambient temp of 22
CPU idle = 28
CPU load = 36
GPU idle = 29
GPU load = 38
I'm in the midwest in the states and right now there is a nice cool breeze with the windows open. The other day the ambient temp was around 28-29 so all idle/load temps were about 5 degrees more than what they are now. Nothing ever above or at 45 however (even when maxing out battlefield 4 while streaming youtube and chatting online).
The pumps and reservoirs were first held on with some screws and washers as there are plenty of holes on the side of the drive cages to attach these to. However, I noticed that this caused the drive cages to bend under he weight. So much that the drive doors would not stay shut and it was very noticeable. This was caused by a combination of my incredibly heavy glass reservoirs and the very thin drive cage material/metal.
To combat this, I used this 3m dual lock stuff which works remarkably well. It holds stronger than any simple velcro I have ever seen or used. Absolutely amazing stuff and I highly recommend it for modding. Once you join two pieces together you would swear that they are permanently glued together. I then used some zip ties and strung them from one side of the drive cage to the other (out of view and cannot be seen without opening up the drive cage doors) to prevent any more bending or bulging from the cages.
If you use washers and nuts, you will have to make sure that the head of the screw is facing the inside of the drive cage. the nut will be attached to the screw on the outside of the drive cage. This will allow the drives to still move in and out of the cage. Otherwise if your screw is protruding too far into the cage, your drives will nt be able to move in or out.
The OG product.
https://www.amazon.com/3M-Dual-Lock-Reclosable-Fastener/dp/B007OXK1AK/ref=sr_1_5?keywords=3m+lock&qid=1557450379&s=gateway&sr=8-5
Dual lock velcro also does a fantastic job at helping to hold a battery still if you're looking for a slightly more refined solution.
I actually use these on a $40 wal-mart chair, and it's perfect.
but the way arm rests tend to be mounted on gaming chairs you may want these as they'll put them more towards where you can reach without contorting.
Hope either of these help you out :)
EDIT: I attach them using this stuff and it is amazing and lasts so much longer than regular velcro, and it's great if you might want to take off your hotas and attach it to your desk or another chair.
Use this to fasten the grill cloth frame to the speaker baffle. That way you can take it on and off for access. You only need 4 smallish pieces to hold it on.
I was just buying the little ~$5 pack at HomeDepot when I needed it, but that only gets you about 6 inches.
I think this is the same stuff. I need to go to HD tomorrow and verify I was buying 250/250. https://www.amazon.com/gp/product/B007OXK1AK
On the cheap side I would use 3M Dual Lock, it's similar looking to velcro but WAY stronger. Instead of hooks and loops it uses opposing mushroom tops, the one I linked is the medium strength (250) and I think a 4-5 cm square on all four corners would be more then strong enough to hold up an A2 aluminum print (don't use too much, it is strong!). It's also nice that unlike velcro you use the same material on both sides, so you don't have to keep track of what you put on the wall or print.
A step up from that in price would be aluminum standoffs. Nicer looking, but much pricier and requires drilling a hole in the wall.
Anytime! 3M Dual Lock Reclosable Fastener TB3550 250/250 Black, 1 in x 10 ft (1 Mated Strip/Bag) https://www.amazon.com/dp/B007OXK1AK/ref=cm_sw_r_cp_api_FSb-Bb8T1AKGD
Sorry embedding links isn’t working for me at the moment. It’s similar to hook and loop but just holds a lot better. You don’t need much and it is very strong.
I use it for my pedals as well.
VELCRO - Industrial Strength - 2" Wide Tape, 15' - Black https://www.amazon.com/dp/B00006RSP1/ref=cm_sw_r_other_awd_Lu42wbXY3P2CH
That's what I use.
Here is the stuff Pedrotheterror recommended. I have never personally used it though. Seems a bit overkill as well.
3M Dual Lock Reclosable Fastener TB3550 250/250 Black, 1 in x 10 ft (1 Mated Strip/Bag) https://www.amazon.com/dp/B007OXK1AK/ref=cm_sw_r_other_awd_Fv42wb66S3VNH
If I may, I strongly suggest 3M Dual-Lock, not normal velcro. Dual-Lock is intense stuff and will last you much longer.
This stuff is awesome:
https://www.amazon.com/3M-Dual-Lock-Reclosable-Fastener/dp/B007OXK1AK
Much stronger attachment than normal velcro, and can be removed cleanly (might just need a bit of goo-gone to get all the residue)
I haven't had a need to put any on my synths, but I use it to hold pretty much everything else together.
At first I was like lol, but then I was like, that's not actually a bad idea, if you use this: http://www.amazon.com/3M-Dual-Lock-Reclosable-Fastener/dp/B007OXK1AK
It's really tough.
Sure. 90% of it was putting an Ikea Signum underneath the desk towards the back to carry all the cables. http://www.ikea.com/au/en/catalog/products/10200254/
I also used some 3M dual lock Velcro to stick the powerboard to the underside of the desk, up off the floor. https://www.amazon.com/3M-Dual-Lock-Reclosable-Fastener/dp/B007OXK1AK
Finally, I used a number of small Velcro cable ties, kind of like these, to keep cables together. https://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Multi-color/dp/B00144CABS
Is this the same thing?
http://www.amazon.com/3M-Dual-Lock-Reclosable-Fastener/dp/B007OXK1AK
welcome!
yeah most build videos i've seen usually omit them too, but it's usually cuz those people are accustomed to building so many. HELL, the other day i was calibrating my ESC's and for some reason blheli decided to make my motors go bat shit crazy (props off of course). Lucky, the smoke stopper didn't allow it to draw too much power. so yeah you just never know.
remembered a few more.
I've learned to prevent my battery straps from breaking (and they do) put a slab of hot glue near the plastic loop where it attaches to itself.. this part of the velcro is week on EVERY strap and this is where all of mine have broken from. After slapping a glob of hot glue in this location (both sides) i have yet to break one (well now i probably will, LOL).
We include 3M Dual-lock so you can stick it anywhere you desire. Including in an SSD sled.
Where we placed it in H440 for photo op.
Where we placed it in I believe our Source 530.