Reddit reviews 3M Marine Compound and Finishing Material (06044)– For Boats and RVs – 32 Ounces
We found 3 Reddit comments about 3M Marine Compound and Finishing Material (06044)– For Boats and RVs – 32 Ounces. Here are the top ones, ranked by their Reddit score.
SAFE FOR GELCOATS AND FIBERGLASS – Formulated specifically for compounding and polishing boats and RVsSAVES TIME – Double-duty formula lets you compound and polish in one easy stepWORKS HARD SO YOU DON’T HAVE TO – Fast-cutting compound removes scratches, stains, swirl marks and oxidation from boat surfacesBUFFS TO A HIGH GLOSS – Finishing material polishes surfaces to a bright, smooth shineEXCELLENT FOR REFINISHING – Use after sanding and before applying final wax for like-new appearance year round
I can’t tell from the picture, is the enamel etched or not? If it’s etched it’ll take a professional restore job. If not you can try this: Holikme 14Piece Drill Brush Attachments Set, Scrub Pads & Sponge,Buffing Pads，Power Scrubber Brush with Extend Long Attachment，Car Polishing Pad Kit https://www.amazon.com/dp/B07P7NFV1F/ref=cm_sw_r_cp_api_i_DE2VDb4TJ78JB
I’ve also used rubbing compound with some success. This one is very good. 3M Marine Compound and Finishing Material (06044) - For Boats and RVs - 32 Ounces https://www.amazon.com/dp/B0000AZ9J0/ref=cm_sw_r_cp_api_i_wI2VDb4VJXRS0
Power tools will be your friend in this. Also some strong arms. Good luck.
I would start with the 400 grit and see how much it takes off. If you have to use a higher grit to get it off, do a second sanding with the 400 or 600 grit when you're done just to get it nice and smooth. I will use some polish (https://www.amazon.com/gp/product/B0000AZ9J0/ref=oh_aui_detailpage_o07_s01?ie=UTF8&psc=1) as well when I'm done, but it's completely unnecessary.
no its not the same. fiberglass is porous and its different in every way..I dont see a point in using a clay bar, you will wear yourself out doing that there are much easier ways to remove as much oxidation as possible before you start.
Wash it first to make the job easier, you can use an auto soap i use the gold line? i forget the name of it but i think it is meguiars goldclass soap. If it is reall bad use your judgment and maybe a pressure washer will be best for your job.
Determine the surface you are working with and what condition it is in, just like you would a car. If it is quality gelcoat it will come back even if you have white dust coming off from oxidation.
Another option, an acid wash on the hull, this strips the wax and gives you a clean surface to work with, removes rust, stains, etc. careful not to use it on paint. and be careful using it period, read the warning label and carefully read instructions..obviously.
Auto products are meant for cars and protection from different elements on non-porous surfaces.
if it has heavy oxidation and you are ready to start buffing, i would get a good wool pad (3m perfect it) and 3M compound and finishing material. https://www.amazon.com/3M-Compound-Finishing-Material-06044/dp/B0000AZ9J0/ref=sr_1_1?ie=UTF8&qid=1469508075&sr=8-1&keywords=3m+compound+and+finishing+material
this is my go to if Finesse-It is not working. A lot of boat detailers use that product as a last resort because we mostly work on newer boats but honestly most boats have quality gelcoat that can handle it no problem and the results are perfect(with the compound). if you are dealing with a newer, well maintained boat try finesse it (also a 3m product) polish.
auto wax is not meant to hold up on the water, fresh water and especially not salt water. I would recommend Meguiar's Flagship paste wax, it comes off easier than fleetwax and lasts just as long. if you use these products the boat will look great all the time! I hope this makes sense, im kinda tired and i wanted to get back to you before tomorrow. if you have any questions just ask !