Reddit Reddit reviews 3M Scotchcal Reflective Striping Tape, White, .25-Inch by 50-Foot

We found 6 Reddit comments about 3M Scotchcal Reflective Striping Tape, White, .25-Inch by 50-Foot. Here are the top ones, ranked by their Reddit score.

3M Scotchcal Reflective Striping Tape, White, .25-Inch by 50-Foot
3M Scotchlite Reflective Striping Tape is a reflective film which is intended to provide light reflective properties in darkness. Safety and nighttime visibility may be improved with the 3M Scotchlite Reflective Series Film 680 product. Primary uses include commercial vehicles, cars, automobiles, boats, railroad and bus graphics; sign graphics; and striping (great for motorcycle helmets).Please note 3M uses the same Scotchcal retail packaging for all their striping tapes (whether they are reflective or not); however, all Scotchlite reflective striping tape product numbers will start with 799 which will be on the retail packaging (e.g. 79902 is for 1/4 inch wide black).Carrier/Backing: enclosed lens, retroreflective vinyl film. Adhesive: acrylic. Thickness: 7 mils (carrier, adhesive.Application Temperature: 50F to 100F. Service/Operating Temperature: -30F to 200F.Release Liner: polyethylene-coated paper
Check price on Amazon

6 Reddit comments about 3M Scotchcal Reflective Striping Tape, White, .25-Inch by 50-Foot:

u/checkitoutmyfriend · 1 pointr/BurningMan

Here is what I did last year. All of it survived the burn, vinegar cleaning, various other washings, and is ready for the playa again. Fresh batts will be installed closer to departure time.

Wheel lights. Enough for once around a 26"dia wheel. Blue up front, red on back. 3AAs lasted all week.


Tail light, 2AAAs last all week, lots of settings.

Dual duty Head light and Holder 3AAAs needed changing at four days. I actually had two of these. ;)

I also had a flag on my bike with a battery operated GlowStick at the top.

The frame was 'traced' with Reflector Tape. When hit with light, it glows like Tron movie vehicles. Not my bike, a pic from the Jungle's customer pic gallery. I traced the frame and made connections just as the frame does. Gives a pretty cool effect. :)

Always bring extra batts, its good practice.

u/hidperf · 1 pointr/bikecommuting

The bike started life as a 2012 Motobecane Fantom Cross Pro, which came with some good components already. SRAM Rival partial group,
FSA crankset, and Mavic Aksium Race wheels. I've had good luck with this bike and it's got almost 2k miles on it, so I kept most of it, but not all.

Once I decided to make it my commuter bike, I started adding things.

For lights I picked up the Cygolite Hot shot rear light and use one of my MTB lights if needed for the front, a
Chinese knock-off CREE XM-L2 front light

For tires I went with the Panaracer RiBMo 700x32c based on feedback from users on here.

You can't go wrong with a Tubus Logo Evo Rear Rack and Ortlieb Back Roller Classics.


I wanted some extra gearing for those climbs along the way, so I went with the SRAM FORCE Rear Derailleur so I could run a SRAM PG-1050 11-32 Cassette.

Of course, I needed a new KMC X10SL chain for the new gear combo.

I picked up a new road bike and pulled the Ritchey Pro Streem Saddle and Ritchey Pro Biomax bars off of that bike and used them on my commuter, along with some new Lizard Skins DSP 3.2mm bar tape and some Soma Road Flares for added visibility.

For a little less weight and possible shock absorbtion, I threw in a Chinese knock off carbon seat post.

I also wanted something besides my regular riding shoes, so I opted for the Shimano Click'R PD-T700 pedals and
Shimano SH-CT40 Cycling Shoes
, which I love and highly recommend.

I also needed to adjust the fit so I picked up a Kalloy Uno 6 90mm stem because I've had great luck with them on other bikes.

And for added safety, I picked up two rolls of 3M Scotchcal Reflective Striping Tape in white and black, and added white stripes to the white frame and black stripes to the rims and the back of my helmet.