Reddit reviews 3M Super Weatherstrip and Gasket Adhesive, 08001, Yellow, 5 oz Tube
We found 2 Reddit comments about 3M Super Weatherstrip and Gasket Adhesive, 08001, Yellow, 5 oz Tube. Here are the top ones, ranked by their Reddit score.
Bonds weather stripping, headliners, gaskets and moreForms flexible, waterproof bond that resists vibrationEasy to brush and spread right from the tube, saving timeResists oils, solvents, detergents and temperature changes for permanent repairsBonds to a range of surfaces including vinyl, metal, fabrics and rubber
3M makes a body trim and weather strip adhesive.
http://www.amazon.com/3M-08001-Yellow-Weatherstrip-Adhesive/dp/B000HTNNDA
Get some blue painters tape, some good drop cloth to protect and cover the stuff under and around this, and some 3M gasket adhesive:
https://www.amazon.com/3M-08001-Weatherstrip-Gasket-Adhesive-5/dp/B000HTNNDA/ref=sr_1_3?keywords=3m+gasket+glue&qid=1568910027&s=gateway&sr=8-3
Clean the area with some rubbing alcohol, put some of this between the surfaces (not too much that it oozes out) and then get it tightly wrapped up to set. The shit is magical but gooey and stringy as hell when you are dispensing it.
I've used this on door gaskets on Audis before. This is for the gasket stuck onto the door with that nicer double sided tape that likes to detach over time. Simply clean the surfaces, dribble a line of this stuff on and use some painters tape or something to hold it in place while it sets. For door gaskets the bleed out wouldn't be a big deal, but for the e-brake you'd see it. This glue is pretty robust, but given the cosmetic nature you'd want to be really careful on how much you use. Maybe play with it to get a sense for how quick it sets up if you want to spread it around lightly.