Reddit Reddit reviews Aeotec by Aeon Labs ZW056 ZW056-A Doorbell Gen5, Small, White

We found 9 Reddit comments about Aeotec by Aeon Labs ZW056 ZW056-A Doorbell Gen5, Small, White. Here are the top ones, ranked by their Reddit score.

Electronics
Security & Surveillance Equipment
Security & Surveillance Accessories
Aeotec by Aeon Labs ZW056 ZW056-A Doorbell Gen5, Small, White
Every press of Doorbell's outdoor button notifies your connected home that someone is at the door, allowing you to receive notifications, a chime in the home, and to activate any devices attached to your Z-Wave system.Wirelessly communicating with Doorbell's button. Doorbell speaker offers configurable volume and tones and simply plugs into any power outlet. Each speaker module is only 64.8mm wide, 92.3mm high, and 30.8 deep.Doorbell is easy to install. Its speaker simply plugs into a power outlet, and its button can be easily installed beside your front door with double-sided tape or small screws. You'll find those easy installation methods provided in Doorbell's box, along with the USB cable that'll allow you change its alert tones.From outside to in, Doorbell uses ultra-low powered wireless communication. There's no wiring necessary. Hear and see when someone is at your door via Doorbell's LED light alerts and customisable tones.Works with HomeSeer ISY994Zw VeraEdge Z-Wave Gateway Controller - Set up parameter 80 = 1 (1 bit dec) to receive notifications and create scenes including the doorbell
Check price on Amazon

9 Reddit comments about Aeotec by Aeon Labs ZW056 ZW056-A Doorbell Gen5, Small, White:

u/bundlednc · 2 pointsr/homeautomation

Some of the window/door sensors allow you to connect a pair of wires which in this case would allow you to connect alarm wire to the sensor and trigger the z-wave part by pressing the doorbell button connected to the other end of the wire.
I used this one: https://amzn.com/B00HPIYJWU

Once you can send a z-wave command via the doorbell button then you can make it do a number of things. I trigger an MP3 using this z-wave doorbell: https://amzn.com/B0182XG27Q (note that bad reviews are related the the useless wireless button, the actual device is really useful as you can add many other sounds and trigger them with any number of z-wave devices) as well as flash the strobe on a couple of these: https://amzn.com/B00MNYSEKY. Other people have it flash lights, play sounds from their Sonos speakers etc.
This all is assuming you have some sort of HA hub as well.

u/johnnybags · 2 pointsr/SmartThings

I've got this one: https://www.amazon.com/Aeotec-Aeon-Labs-ZW056-Doorbell/dp/B0182XG27Q/

The "chime" is a z-wave siren with an sd card containing 5 audio files. smart things triggers 1-5, the siren plays the corresponding audio

u/NCngnr · 2 pointsr/apple

There's a system called Vera that works decently well. There's an app, several devices by several manufacturers, etc. It does push notifications for my home's door/window sensors and motion alarms. There seem to be doorbells that interface with vera, which seemingly would do the trick.

On that note, this seems to fit what you're after, you just need to have it connect to a z-wave or other home automation controller like one of Vera's. Hope that helps.

u/stayintheshadows · 2 pointsr/alexa

Try either the Ring doorbell products or get a z-wave doorbell like this: Aeotec by Aeon Labs ZW056 Doorbell, Small, White https://www.amazon.com/dp/B0182XG27Q/ref=cm_sw_r_cp_api_2IJdAbP3REJ65

If you have a hub. Can likely set up a rule either in your hub software or using IFTTT.

I am curious to try this now.

u/jam905 · 2 pointsr/homeautomation

Probably not what you want to hear, but the simplest way would be to get a z-wave doorbell, or a z-wave doorbell sensor.

u/iFizzgig · 1 pointr/SmartThings

I believe you can can come figure the Aeon Labs doorbell to do this with a custom app.

https://www.amazon.com/dp/B0182XG27Q/ref=cm_sw_r_cp_api_WvIryb5ASQYAT

u/artel · 1 pointr/homeautomation

I own the Aeotec doorbell which is powered by an outlet. https://www.amazon.com/Aeotec-Aeon-Labs-ZW056-Doorbell/dp/B0182XG27Q

You can configure the sounds that are played by plugging in a USB cable to the back of the device and uploading your own MP3s. It's not as loud as an alarm, but for your situation that may be acceptable.

u/q-bus · 1 pointr/homeautomation

https://www.amazon.com/Aeon-Labs-ZW056-z-wave-doorbell/dp/B0182XG27Q

This doorbell let you have multiple audio files on it and you can set up home automation to trigger the different ones . You basically send the audio file number to parameter six.