Reddit Reddit reviews Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor

We found 19 Reddit comments about Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor. Here are the top ones, ranked by their Reddit score.

Electronics
Security & Surveillance Equipment
Motion Detectors
Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor
6-in-1 Z-Wave Plus MultiSensor: motion, humidity, temperature, light lux, UV, vibration sensor.2 year battery lifeSuper-small at 1.8 inches. Can be installed in corner, in-wall, on shelf or in downlight.Works with certified Z-Wave gateways and tested with Fibaro, Indigo 7, openHAB, SmartThings, Vera.Z-Wave Plus certified. Certification number: ZC10-15070011
Check price on Amazon

19 Reddit comments about Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor:

u/craschnet · 8 pointsr/homeautomation

Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor https://www.amazon.com/dp/B0151Z8ZQY/ref=cm_sw_r_cp_apa_i_vOgPDb5QQA5FZ

u/shout4 · 6 pointsr/gpumining

Those are the smart sensors, They control the 3 exhaust fans per temp readings. They also act as motion sensors and turn the lights on in the room when I walk in. The white boxes on the right wall are 240v smart switches that control power on/off from my phone manually or triggered by scene i.e. temp to high, or ping failure reboot rig. Energy monitor installed inside breaker box also smart home (Z-Wave). All is controlled by a Vera smart home controller. Links below.

https://www.amazon.com/gp/aw/d/B0151Z8ZQY?psc=1&ref=yo_pop_mb_pd

https://www.amazon.com/gp/aw/d/B00MBIRF5W?psc=1&ref=yo_pop_mb_pd

https://www.amazon.com/gp/aw/d/B00XD8WZX6?psc=1&ref=yo_pop_mb_pd

https://www.amazon.com/gp/aw/d/B01BX9P89Y/ref=mp_s_a_1_1?ie=UTF8&qid=1519912082&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=vera+plus+controller&dpPl=1&dpID=31jWnlwJITL&ref=plSrch

https://www.amazon.com/gp/aw/d/B007ZU69DU?psc=1&ref=yo_pop_mb_pd

u/cmsimike · 6 pointsr/homeautomation

More than just temp and humidity, so might be overkill for you, but I have one of these that I really love:
https://www.amazon.com/Aeotec-Multisensor-temperature-humidity-vibration/dp/B0151Z8ZQY/ref=sr_1_sc_1

Not only is it battery powered, but it comes with a usb cable so you can plug it in if you are close to an outlet

u/tallglassofmelonade · 3 pointsr/SmartThings

Something like the Aeon multi sensor?

Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor https://www.amazon.com/dp/B0151Z8ZQY/ref=cm_sw_r_cp_tai_H5yKzbEFZ8CQW

u/dalchemy · 2 pointsr/homeassistant

If you cant/dont want to go the route of ny1105's Fibaro (which is a great option) and you still wanted a repeater with some other useful features, I'd suggest the aeotec multisensor. In the USB powered mode, it'll act as a zwave+ repeater instead of just a battery powered node. And now you have motion and temperature sensors that you can use for other fun automations :)

​

I use one of the outdoor GE (dongle) switches as a repeater for my gates. Just barely enough range to hit the back gate ~300ft (los) away

u/shortRound1911 · 1 pointr/homeassistant

My fav Z-Wave motion sensor is the ecolink (https://www.amazon.com/gp/product/B01MQXXG0I/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1). Out of all my zwave motion sensors these are by far the best motion sensor I have. Only 'down side' is the detection range is sort of large for my rooms so motion is triggered from hallway when walking by.

Pros:
- Fast triggering

- Very long battery life (running same batteries over a yr now)

- Has never needed tinkering with after setup, very stable and reliable

​

Other Z-Wave motion sensors i have, ordered by best to worst imo:

- Aeotec multisensor 6 (3x) best multi sensor option imo but burns battery fast (~1-2months) (https://www.amazon.com/gp/product/B0151Z8ZQY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)

- Fibaro Motion Sensor (1x) works great most of the time, but every few months it freaks out and constantly triggers motion and needs to be removed and re-added to network. prob bad unit (https://www.amazon.com/gp/product/B01KOGDETI/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)

- Mono Price multi sensor (2x) very slow motion sensor detection, scan freq is low and afaik unconfigurable. bottom barrel option imo, do not recommend as motion sensors but do ok w/ temp / humidity / light but lite measurement is in a weird scale vs other lux sensors i have (https://www.amazon.com/gp/product/B01MRYFE90/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)

u/MrMajors · 1 pointr/homeautomation

Sorry could not resist. I travel a bit and I monitor my indoor lettuce hydroponic garden with one of these:

https://www.amazon.com/gp/product/B0151Z8ZQY/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

Gives me a nice snapshot of what's going on from my phone or tablet. It is indoor only though. Still check my growing area everyday when home. Every successful gardener will check their garden as much as possible.

Good luck and have fun.

u/Sea_Panther · 1 pointr/smarthome

Maybe something like the Aeotec Multisensor


You would just stick it in. They promise about 2 years on battery life.

This is Z-wave, so you would also need something like the Aeotec Z-Stick and leave that in a computer you leave on. I have one at home on a Raspberry PI running home assistant, and view the sensor data there.

I'm sure this isn't the cheapest solution, but it would allow you to expand with other z-wave devices in the future.

u/Vlad_the_Homeowner · 1 pointr/alexa

You can try something like this. But both the washer and dishwasher go through different phases of cleaning, some of which likely don't take much if any electricity (e.g. while filling). That could create some issues with a current detector setup. It might take a fair amount of fine tuning. Search around (SmartThings communicy, HASS, Webcore, etc) a lot of people have tackled this problem. I'm guessing there are routines and pistons already well developed.

For the dryer, and maybe the washer, I've read of people having a lot of success using multipurpose sensorsthat have a vibration/movement sensor.

u/0110010001100010 · 1 pointr/homeautomation

I've been really liking these for the plugs lately: https://smile.amazon.com/gp/product/B075ZNZX8J/

They are nice and compact and also report energy usage if that's needed.

As for the sensor - I've heard good things about these but never personally used them: https://smile.amazon.com/Aeotec-Multisensor-temperature-humidity-vibration/dp/B0151Z8ZQY/

I have some junky Monoprice ones they cause me a lot of headache. I also have these which seem to work pretty well. I like 10-yeah battery life and how compact and intrusive they are: https://www.thesmartesthouse.com/products/sensative-z-wave-plus-strips-comfort-indoor-outdoor-temperature-moisture-sensor

I got them on sale though for I think $35 each.

u/gabe9811 · 1 pointr/Sneks

here’s mine . I tried looking for one that only does heat and humidity but couldn’t find any, so this is what I settled for

u/xenokira · 1 pointr/winkhub

I switched to SmartThings, but ran into a similar problem. It's not cheap, but I picked up one of these to work around the problem. Instead of using the dawn/dusk triggers, I use this sensor to detect illuminance levels (just have it sitting it one of my windows). Kind of nice as it allows me to turn lights on during days that dark storms come through.

u/OzymandiasKoK · 1 pointr/homeautomation

You might consider some of the multi-sensors like Aeon Labs' that not only do temp and humidity, but also light and motion. You can leverage that info a number of different ways. That's for z-wave of course, but there are similar ones for other protocols depending on what you've got.

u/dexxsonic · 1 pointr/SavageGarden

I was just thinking this
https://www.amazon.com/Aeotec-Multisensor-temperature-humidity-vibration/dp/B0151Z8ZQY/ref=sr_1_6?ie=UTF8&qid=1519072317&sr=8-6&keywords=Aeotec

And the smart plug and z wave hub I already have. They all work with ifttt, so I should be able to trigger them together. Guess I'll try it and report back.

u/edman007-work · 1 pointr/SavageGarden

I have a raspberry pi with a USB ZWave stick to control my home, my plants are monitored with this sensor, and I control the lights and humidifier with a zwave controlled plug

u/AresX85 · 1 pointr/homeautomation

Gotcha, well you can still get the basic hub+remote for $135 it looks. I have this, but never use the remote really, cause everything is exposed as switches to my other systems.

There's plenty you can do if you know how to code, but if you aren't writing plugins for HASS you can get away with just learning some basic YAML pretty much, and there's tons of useful resources on the website.

I use this sensor for a lot of things, including temp/humidity. It's also got a light sensor, if that would be in any way helpful there as well. It shows up in HASS with the assortment of sensors that can then be tied to whatever automations and such.