Reddit Reddit reviews AmazonBasics 100ft 16-Gauge Audio Stereo Speaker Wire Cable, 100 Feet

We found 98 Reddit comments about AmazonBasics 100ft 16-Gauge Audio Stereo Speaker Wire Cable, 100 Feet. Here are the top ones, ranked by their Reddit score.

Audio & Video Accessories
Audio & Video Cables & Interconnects
Accessories & Supplies
Speaker Cables
Electronics
Audio Cables
AmazonBasics 100ft 16-Gauge Audio Stereo Speaker Wire Cable, 100 Feet
Connects audio speakers to your A/V receiver or amplifierThe plastic jacket around the speaker wire helps deliver high-quality undistorted signals to and from all of your audio equipmentOne side of the wire is marked with a white line, making it quick and easy to distinguish the polarity for a proper audio system set upComes wrapped around a hard plastic spool, making dispensing convenient and easyProduct Dimensions: 100 Feet x 16-gauge
Check price on Amazon

98 Reddit comments about AmazonBasics 100ft 16-Gauge Audio Stereo Speaker Wire Cable, 100 Feet:

u/Cyno01 · 37 pointsr/oddlysatisfying

People really need to spend a little bit more money on sound in their setups. A real 5.1 surround setup can be had for <$300 and even the cheapest option will blow any soundbar out of the water.

Go with a slightly smaller TV even if it means getting a receiver and some speakers, way more immersion for your dollar than anything else. And modern stuff with CEC keeps controlling everything super simple, i dont even need my Harmony remote anymore.

In this case a $50 2.1 set of computer speakers is an improvement over the tvs built in, but not by much, and not helped any having them all on the same little shelf like that either.

EDIT: https://smile.amazon.com/Onkyo-HT-S3800-Channel-Theater-Package/dp/B01F3ENAOU/
https://smile.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y/
https://smile.amazon.com/Mount-MI-1214-Surround-Satellite-Capacity/dp/B003R0AXPW/

$303 with enough wire to go the long way around and speaker stands, so no drilling even. Even if you dont have the biggest TV itll make everybody want to have movie night at your place.

u/GbMaxSE · 16 pointsr/hometheater
u/GramboLazarus · 10 pointsr/realdubstep

IMHO: A subwoofer isn't optional when it comes to dubstep. You'll be missing all the low-end (which let's be honest, is why we're all here) if you omit a decent sub from you set up. As far as amps (I call these receivers) go, you'd probably be best off visiting your local pawn shop or anywhere you can get pre-owned electronics and picking something up. I got mine for under $100CAD and it has power to spare. For ease of set-up I'd suggest finding something with dedicated subwoofer outputs on the back. As for speakers, these or these will do right by you. Personally I use this subwoofer, and it has the juice to have my entire house shaking. Wires are pretty much standard in my experience as long as you're talking about a simple home listening system. These wires would do fine for your needs. If you want a proper listening experience dont use bluetooth speakers, and dont skimp on a subwoofer.

Hope that helps, my dude!

u/polypeptide147 · 9 pointsr/BudgetAudiophile

Welcome. You'll be blown away. For real.

What is your budget? For fun, I'll assume that it is just over $200.

For better all-around speakers, I recommend the Elacs.

You'll need speaker wire too. To cut it, a pair of wire strippers.

This amp is an extremely good budget amp. That is an ebay listing for an open box one. You'll save like $20 doing that. I have a few from this seller and they're great.

This RCA cable will plug it into whatever you want. That thing is crazy good quality for the price. I mean it.

So, that is all you will need. And trust me. You'll be blown away. For real. If you've never heard good speakers, those elacs will sound like a whole new world to you.

u/MardukX · 7 pointsr/BudgetAudiophile

How big is your room? What are you using this system for primarily - music, movies, video games? A mix? Are you looking for a 2.0 system (two front speakers only), a 2.1 (front speakers plus subwoofer), or something bigger (adding in another front channel speaker, subwoofer(s), etc.)? Are you located in the US or elsewhere? See below for some start-up recommendations, from a fellow newbie located in the US..

u/Caswell64 · 6 pointsr/vinyl

So all speakers need to be 'driven' by an amplifier- meaning fed electric power to do their magic in addition to the sound signal. Powered speakers have the amp built-in so you just need to send the line-level sound (typically over RCA connectors) and the built-in amp will take care of the rest. Passive speakers, by contrast, do not have an amplifier, and expect one to drive them in addition to the sound signal. Almost always they are both carried over speaker wire like this (https://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y/ref=sr_1_1?ie=UTF8&qid=1503097133&sr=8-1-spons&keywords=speaker+wire&psc=1).

Those Dayton speakers are passive, so you will need an amp like the one you linked. I'm not familiar enough with that amp to give an informed judgment as to whether that amp is powerful enough to drive those speakers.

Also, for background, what the pre-amp (or phono stage) is doing is converting the very weak signal coming from your turntable cartridge to the line-level signal that external amps or powered speakers would expect. It also reverses the RIAA equalization put on records to sound better- it boosts the bass an diminishes the treble compared to what's cut on the record itself (if it was pressed without equalization, the stylus would bounce around in the groove because of the bass, and the treble would be too faint to play back reliably).

u/drdiddlegg · 6 pointsr/hometheater
u/kaeaene · 5 pointsr/vinyl

You'll need an amplifier, since those speakers are not powered.

This is a cheap amplifier, if all you want is for your setup to work.
http://www.amazon.co.uk/dp/B007VMA6OU

And one of these 3.5mm to RCA cables to connect your turntable to the amp.
http://www.amazon.co.uk/dp/B000Q6LSWM

And some speaker wire to connect the amp to your speakers.
http://www.amazon.co.uk/dp/B006LW0W5Y

edit: listen to rpbtz's response. The sidebar has everything you need to know at this stage.

u/Armsc · 4 pointsr/BudgetAudiophile

You're going to need the following.

  1. Amplifier - no amp no sound. You can use something like a Lepy mini amp $25 if you're going for a desktop set.

  2. Speaker wire $10 - You can use speaker wire to connect the speaker and the amp as the Dayton has high level inputs. Run the speaker wire from the amp to the Dayton then from the Dayton to the speakers.

  3. 3.5mm to RCA $10 - You'll need this to hook the phone to the amp.
u/BeardedAlbatross · 4 pointsr/BudgetAudiophile

Sure you can piece something together, but it won't be recommended to purchase more than your main left and right speakers at your sub $350 budget. You can position yourself to add to it down the line by purchasing an affordable 5.1 home theater receiver. You can check accessories4less for decently priced refurbished units. Plenty of people around these parts have used them and they seem to be pretty good.

Something like this Denon should be $170 after shipping. Add in a few bucks for speaker wire and spend the rest on speakers.

I would say spend the rest on a pair of used/open box Polk S15 speakers. They're the new kids on the block that are fairly attractive, offer good performance for the money, and are at heavy discounts used quite often.

To that setup you can add a BIC F12 if you search your local craigslist, or once you have the money be on the lookout for the Dayton SUB1200 to go on sale for $135 on parts-express. After the sub your next addition would be the Polk S30 center channel that can be found for $130. After that come your surrounds which you don't have to spend as much moeny on. You'd either buy the matching Polk S10 or something cheaper.

Yeah it's a little more effort but it's fun to learn about and it's pretty modular. Plus decent speakers will last you as long as you want. The same can't be said for a proprietary system like that Logitech. Outside of bass bloat, even the base left+right speaker and receiver will sound better than the logitech. Once you add a sub it's no contest.

Edit: Something like the JBL B17 are also a good buy right now at $150. For a 7" woofer in a ported cabinet that goes down to 55hz I would expect them to be easier to drive than their 87db sensitivity though, that's interesting.

u/mookietaco3000 · 4 pointsr/BillBurr

Surely my friend.

For those wondering what you'll need to get this setup, here's the other items I chose to purchase:

Table: Audio Technia 60 non blue tooth edition

https://www.amazon.com/Audio-Technica-AT-LP60-Automatic-Belt-Drive-Turntable/dp/B002GYTPAE

Speakers:
Micca MB42 Bookshelf Speakers With 4-Inch Carbon Fiber Woofer and Silk Dome Tweeter (Black, Pair)

https://www.amazon.com/Micca-MB42-Bookshelf-Speakers-With-4-Inch-Carbon-Fiber-Woofer-and-Silk-Dome-Tweeter-Black-Pair/dp/B009IUIV4A/ref=cm_cr_dp_mb_rvw_txt?ie=UTF8


Speaker wire:
AmazonBasics 16-Gauge Speaker Wire - 100 Feet
https://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-100-Feet/dp/B006LW0W5Y/ref=cm_cr_dp_mb_rvw_txt?ie=UTF8


Mini-Amplifier:
Seeduck Lepy lp 2020a Class-D Hi-Fi Audio Mini Amplifier with Power Supply Lepy Amplifier LP2020A
https://www.amazon.com/Seeduck-Lepy-lp-2020a-Class-D-Hi-Fi-Audio-Mini-Amplifier-with-Power-Supply-Lepy-Amplifier-LP2020A/dp/B01HRR5AWQ/ref=cm_cr_dp_mb_rvw_txt?ie=UTF8

It was about $230 all together from amazon.

u/TeamTaeyeon · 3 pointsr/BudgetAudiophile

For cords/wires you will need a RCA to 3.5mm cable something like this to connect your amp to your pc. You will also need 3 speaker cables such as these 1 for your amp to sub and assuming your sub will have a high level input and output, you will connect the other 2 cables to the sub and out to the speakers.

You could also make your own speaker cables as well which is a little cheaper by using this

For sub wise, I would consider a Dayton audio sub 800 or 1000 as a start.

u/Umlautica · 3 pointsr/diyaudio

The good news is that everything is already wired for sound, the bad news is that you'll need to buy amp(s) in order to use the speakers. The cable that you're holding up is RCA and is not powerful enough to drive a speaker. You'll need something like a multi-zone amp for 6 channels if you want to use all of the speakers in the house. These are ambient house speakers and not speakers set up for a home theater though right?

An option that might work well if you like Chromecast is to buy two or three pairs of this SMSL SA50 amps with the Chromecast Audio devices. This would also allow you to control multiple zones for music using each Chromecast audio. Each Chromecast Audio connects with each amp using a 3.5mm to RCA cable and then each SMSL amp connects to the gold terminals on the wall using speaker cable.

u/explosivo563 · 3 pointsr/audio

Strange? You mean the speaker inputs? That's for speaker cable. Banana plugs are optional.

u/ballpein · 3 pointsr/audiophile

Get yourself a nice little Amp like an SMSL SA-50, a 3.5mm aux cable to connect your TV's headphone out to the amp, and some 16 gauge speaker wire to connect amp to speakers. Bob's your uncle.

IF money is type, you can go with a cheaper amp, but the first one I mentioned is nicer unit that you can keep when you upgrade to a TV with an optical out.

u/DieselWang · 3 pointsr/audiophile

Amazon Basics (http://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y/) and Monoprice (http://www.monoprice.com/Category?c_id=102&cp_id=10239) make good, cheap speaker wire.

Good choice on the speaker. Those Chanes are amazing values: http://www.cnet.com/news/the-149-chane-a1rx-c-speaker-is-almost-too-good-to-be-true/ The tower version also won a shootout among $1000 speakers with some formidable opposition.

The next step down for subwoofers is the NXG BAS 500 (IMO the best subwoofer under $300): http://www.radioshack.com/nxg-nx-bas-500-12-500-watt-powered-subwoofer/55058551.html#.VIm1SjHF_T8 review here: http://www.hometheatershack.com/forums/speaker-subwoofer-reviews/67178-nxg-nx-bas-500-subwoofer-review.html

However, they sell like hot cakes and they're out of stock everywhere (Radioshack and Amazon are out of them). No idea when they'll come back into stock.

A good option for less than $200 is the BIC F12 and will save you some money: http://www.amazon.com/BIC-America-F12-475-Watt-Subwoofer/dp/B0015A8Y5M

u/justanotherdickweed · 3 pointsr/audiophile

Buy 14 or 16 AWG. It's just standard every day speaker wire you need. Nothing special. 18 would be fine too if you've already got it. If not, this is good.

If you're after fancy looking stuff, I just picked up a set of these. and they are beautiful.

u/jackholexxxx · 3 pointsr/vinyl

The turntable has a built-in preamp, so you do not need one. You will however need a receiver and speaker wire.

Or you can return the speakers and get a set of powered monitors. The powered monitors could be connected directly to the turntable. You will have to adjust the volume using the controls on the speakers.

u/oddsnsodds · 3 pointsr/audiophile

Those are passive speakers requiring separate amplification, which the Mac doesn't provide.

You could use something like the SMSL SA-50. (I need to make a macro for that sentence.):

https://smile.amazon.com/SMSL-50Wx2-TDA7492-Amplifier-Adapter/dp/B00F0H8TOC/

A cable like this from the Mac to the amp:

https://smile.amazon.com/Hosa-CMR-206-Stereo-Breakout-Cable/dp/B000068O3B

Speaker wire from the amp to the speakers:

https://smile.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y

u/capacitors · 3 pointsr/vintageaudio

Okay, you need some speaker wire (I'd recommend 16 gauge 50 or 100 feet like this) and some RCA cables. You can probably find decent cheap RCA cables at a thrift store.

Connect the turntable RCA plugs to the PHONO input jacks on the back of the receiver and connect the ground wire to the SIGNAL GND screw beneath the PHONO jacks. The white plug is left channel and the red one is right channel. Similarly, connect the CD player with an RCA cable from the OUT jacks on the back of the CD player to the CD IN jacks on the back of the receiver. CD players don't require a ground wire.

Cut some equal lengths of speaker wire and strip about 1/2" of the plastic insulator from both ends like this. Connect the stripped part of the wire with the white stripe to the FRONT SPEAKERS red clip on the back of your receiver, and the wire without a stripe to the black clip. Connect these wires to two of the small speakers. Make sure to connect white stripe to red clip and no stripe to black clip on the backs of the speakers. You should have sound now left and right.

You can connect the other two small speakers to the SURROUND SPEAKERS clips if you want to, but those are primarily used for movies.

What does the back of your sub-woofer look like?

Edit: Here is a link to the manual

u/wgboyd · 3 pointsr/vinyl

IMO in your home, it doesn't really matter. If you're running like 200 feet, then maybe it would be an minor issue. Everyone overthinks this crap for what, a $200 pair of speakers? If you've spent $14,000 on speakers, then sure analyze the hell out of it, otherwise you'll never tell the difference. If you crack your speaker open you're going to find (assuming there's a crossover) plenty of wiring that's far thinner than speaker wire. I buy this 16g from Amazon and have no issues at all with it.

u/piratenovelist · 3 pointsr/ToolBand

I am going to be using this article plus my own personal experiences in the 7 years I have been collecting: https://www.techradar.com/news/best-turntables


Turntable: Audio-Technica ATLP120USB Direct Drive Professional USB Turntable Price $229.00 (On Sale at the time of this writing) it comes with a built in Pre-Amp so you are good to go. This is one I have been eyeballing myself.


Amplifier: Yamaha R-S202BL Stereo Receiver Price $149.95 (On sale at the time I am writing this). This is the one I personally use and I love it. It has multiple channels so you can allow for growth. For example I got a stereo cd player at the local thrift store I am trying to upgrade. I just need RCA Cables to hook it up which I do.


Speakers: https://www.amazon.com/Polk-Audio-T15-Bookshelf-Speakers/dp/B002RJLHB8/ref=cm_cr_arp_d_product_top?ie=UTF8 Price $49.98 (Sale at the time I am writing this)


Wire from speakers to Amp: AmazonBasics 100ft 16-Gauge Audio Stereo Speaker Wire Cable - 100 Feet Price $13.49


Headphone Adapter (Trust me you'll need this if you want to listen to music via headphones) Adapter Price: $7.99


Subtotal: $450.41‬ plus taxes. I think you have wiggle room on the speakers, but I searched for high rated ones. If you need help setting up your Turntable and Stereo please feel free to reach out and I can help! :D

u/portezbie · 3 pointsr/hometheater

Hi, I actually had the exact same dilemma as you and about a month ago went for a 2.0 setup.

In the past I've tried a variety of computer speakers and nothing cut it. I never tried a soundbar, but I am super happy with my 2.0 setup.

So here is my $200 set up (big thanks to Zeos for helping me learn and pick out the parts):

$109 manufacturer refurbished Denon AVR 1513 receiver:

http://www.accessories4less.com/make-a-store/item/denavr1513/denon-avr-1513-5.1ch-home-theater-receiver-3d-ready/1.html?_escaped_fragment_=specifications#!specifications

$80 Micca MB42x bookshelf speakers:

http://amzn.to/188rnsc

$9.43 Speaker wire:

http://www.amazon.com/dp/B006LW0W5Y/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=YEA53M3RQ14Z&coliid=I31E8R7IOVMB4E

This is the wire stripper I bought but it is no longer available for prime so I would get a different one:

http://www.amazon.com/Irwin-2078305-Vise-Grip-5-Inch-Stripper/dp/B000JNLUQ6/ref=sr_1_13?ie=UTF8&qid=1394413512&sr=8-13&keywords=wire+stripper

Maybe get this one (but any will probably be fine):

http://www.amazon.com/Gardner-GS-40-Milwaukee-Clipper-Stripper/dp/B00004WLJX/ref=sr_1_11?s=hi&ie=UTF8&qid=1396936022&sr=1-11&keywords=wire+stripper

Lastly, banana plugs for the wires. Optional, but nice to have ($10.96):

http://www.amazon.com/Monoprice-109436-High-Quality-Copper-Speaker/dp/B0097JLQVC/ref=sr_1_2?ie=UTF8&qid=1394413889&sr=8-2&keywords=banana+plug

Total: ~ $250 with tax and shipping and whatnot.

One last piece of advice:

I originally tried the popular Lepai amp and hated it. I just couldn't get the volume I wanted from it.

u/Emintea · 2 pointsr/hometheater

I don't even have a setup yet, so please, someone correct me if I am leading this person astray, but from my own individual research it seems one of the better and more expandable budget setups involves...

u/dcarcher · 2 pointsr/BudgetAudiophile

I'll be honest, I haven't had time to really do an A/B test on them, and my schedule hasn't afforded me a lengthy listening session, but I am much more confident in these new cables.

I had previously been using this wire! with these banana plugs. They did the job, and I will continue to use those cables when testing equipment for functionality or if I do a temporary setup for a friend or something.

The new wire is 12 AWG single-conductor. I had considered doing 14 AWG dual-conductor (honestly just for looks), but I decided to go with the cheaper option. I may upload some pics at a later date as my setup has changed and moved around quite a bit since my first setup post.

u/jasoncaserta · 2 pointsr/audiophile

Completely new to this hifi thing and was going to get a closed box 2.1 system for around $150 now Im thinking I will start with

$90 Micca MB42X pair

$40 Nobsound Mini TPA3116

$11 Speaker Wire

Do I need anything else to make these work? Should I consider anything else (willing to go up to $200 if its significant) ? I plan to buy a sub later down the line when my budget allows it.

u/savasfreeman · 2 pointsr/audiophile

I have a speaker that needs repositioning and my cable is too short, I thought it would be easy to just go on Amazon and grab a longer cable, job done, but now I am confused as to what kind of cable I should be going for, etc.

Any standard satellite speaker (I plan to upgrade later), connecting to a Denon AVR-X500, what cable should I be getting?

Is this correct? https://www.amazon.co.uk/gp/product/B006LW0W5Y/ref=ox_sc_sfl_title_2?ie=UTF8&psc=1&smid=A3P5ROKL5A1OLE

u/bearwardann · 2 pointsr/Music

EDIT: I put main points in bold so that people can skim through this and get the gist of what I'm saying here. Very long post, so I thought it would be merciful to do so.
 

Alrighty, this may be long so buckle up and get ready for a journey.
 

I don't consider myself a hardcore audiophile or an expert in turntables/records, so I did some research when I was first looking to purchase one. I was originally looking at a Crosley record player but was soon warned about how notoriously evil they are -- by the way, DO NOT GET A CROSLEY, THEY ARE TERRIBLE!!! They are notorious for putting too much pressure on vinyls with their needles and end up scratching, carving, and ruining perfectly good records (for reference, ideal tracking force is two grams while the Crosley applies five grams tracking force). The parts are cheap and outdated and the player itself is extremely unstable and will skip if there's any sort of vibrational disturbance nearby. It's not good at all.
 

That said, I want to make sure you know what exactly you're getting into right now. When you buy a turntable, there are other things you need to buy along with it to make it function correctly. I don't know whether you're planning to get a turntable just as a gift that only your SO will use or if it's something you both will use, but it's important nonetheless to know what exactly a turntable requires to work properly. See, when people buy a turntable, a lot of people don't realize that there are three things that are needed alongside it: a pre-amp; an amplifier; and speakers. Speakers is obvious, sure, and of course you'll need something to control the volume, but a lot of people I've talked to only thought about that kind of stuff after purchasing their turntable.
 

The reason why these things are important is because most turntables rely on an electrical current in order to transmit vinyl to audio, but the current the turntable generates on its own doesn't matter if there's nothing to turn that current into sound. Think of it like a secret code. The vinyl is the coded message, and the turntable is the tool that deciphers the code. It can't decipher the code without the correct key, though; a preamp is like the key. It takes that current the turntable generates and amplifies it so that the signal is strong enough to be decoded by the amplifier. The amplifier is what actually turns it into the sound format, and is how you control volume as well. The speakers project the deciphered sound that you get to hear and enjoy. If you only plan on buying a turntable, then you don't need to worry about these things. Otherwise, keep reading; I'm finally getting to the point so please bear with me after this terrible analogy. :P
 

It's a lot to take into consideration when buying a turntable; when I did my research, I found that the Audio Technica LP series was pretty reliable. It's not exactly ultra high-end, but it's a great starting point for beginning collectors. There are two ATLP record players, the 60 and the 120, and some other variants that I'm not really aware of. I personally use the 120 because I thought it was funny being able to mess with the pitch settings on it, and I like the extended options the 120 has over the 60. This is just a comparison between both the 60 and 120 below if you're interested in the Audio Technica LP series:
 

In Favor of the 120:

  • the LP60 is a belt-drive turntable which means that you'll be replacing a belt in the turn table if it breaks, whereas the LP120 is direct drive and there's no broken belts to worry about replacing

  • the stylus is also a better quality in the 120, but I don't know from experience whether this is true in comparison to the 60

  • the 120 is also sturdier than the 60 as well
     

    In Favor of the 60:

  • the LP60 is smaller and more portable than the 120, as the 120 is kind of bulky and heavy

  • the LP60 is cheaper than the 120 (Amazon says that the 60 is about $100 while the 120 is about $300. I recommend the 60 as the best way to start listening to vinyl over the 120 as it's less of a financial commitment than the 120 is, especially if you turn out not to like records. not meaning to be negative but it's something to consider, as well

  • the LP60 has less options, but the options on the 120 don't usually matter to people who are just getting into vinyl so that's more of a personal preference
     

    Something in the favor of both players, though: they both come with built-in preamps, so you won't have to worry about buying one of those. Some people don't like the sound quality of the built-in preamp, but I think it's fine and it really isn't something to worry about as a beginner. The amp and speakers matter a bit more.
     

    When I went to go find a good amp, I made the mistake of going to Best Buy. Never go to Best Buy. It's a nightmare. The guy I talked to about amplifiers promptly directed us to home sound systems that cost over $1,000 in price. I found one on Amazon for $39. Not only does it work with my turntable, it's also bluetooth so you can stream from your phone if you want to as well (I'll link it right here so you can see it). I only set the amplifier up to half volume and it fills the entire room. I thought it was a miracle how I was seeing all of these huge ass home systems and then I get this little tiny ant of an amplifier and it does just as well.
     

    Now, onto speakers. You should think about the speakers the same way as I described the amp. The biggest, most ultra high-end stuff is just not worth it when you're starting out. I use Micca MB42 Bookshelf Speakers, which are amazing (the link is here). It's also $60 on Amazon, so you'll be saving money there, too. Oh, and you'll need speaker wire, which is $11 on Amazon as well.
     

    The total amount of money I spent on my system was $400 (it's really $399 but I rounded up), including the Audio Technica LP120, the mini amp, and the bookshelf speakers. If you get the LP60, you'd only be spending $200 ($199 but again rounded up). My setup and recommendations aren't the most top-of-the-line stuff, sure, but this is all I can recommend to you as this is all I've ever really used. It sounds great and I wouldn't really change it for anything.
     

    I'm so sorry this is such a long read, but I went through a lot figuring this out the hard way. I got my turntable as a gift along with those speakers, but then found out that I also needed to buy an amp to actually be able to make my whole setup work, and it spawned a two week-long horror show of trying to figure out what kind of amp to get. I feel like getting a turntable or really anything on such a scale as this should be a momentous and memorable occasion to cherish forever, and shouldn't be tainted by having to go through the ringer just to get one missing piece of the puzzle. I am also a music lover and feel your first foray into vinyl shouldn't be associated with high costs but rather being able to experience it for the first time and marveling in its strangely magical quality. It's a great gesture, especially towards an SO.
     

    Now I might be over-exaggerating a bit throughout this whole thing, but I think what you're trying to do is very sweet and I thought it would be good to take it seriously. Also, reading long posts like this can be exhausting, so I thought it'd be easier to get through if I did over-exaggerate and make it a more interesting read. Thanks for reading, and I hope your SO appreciates the gift. :)
u/y0y0ma · 2 pointsr/BudgetAudiophile

I think your situation is pretty similar to mine - except I am based in Europe. I also had a very small budget was terribly confused. But I went ahead and bought used speakers + stereo receiver and am pretty happy with my purchase.

This is how my setup looks like. The TV is cheap (~300€) and the audio setup cost me another 100€, including a 3.5 mm to RCA cable and 16 gauge speaker cable. I would rather go for a passive speaker because it means more control over factors like distortion. Plus, a cheap used amp/receiver can added while effectively staying within the same budget.

u/mrbubbles2 · 2 pointsr/DIY_tech

Not really. Just don't go crazy with a crazy large gauge. Just eyeballing it, it looks like that's about 18 gauge so you could easily use 16. AmazonBasics 16-Gauge Speaker Wire - 100 Feet https://www.amazon.com/dp/B006LW0W5Y/ref=cm_sw_r_cp_api_evzQzbNN2YY4V

u/jwaterworth · 2 pointsr/vinyl

You probably need something to connect your turntable directly to the speakers. this will work if the speakers are powered, which I think they are. Here is RCA audio to minijack:

http://www.amazon.com/StarTech-com-MUFMRCA-6-Inch-3-5mm-Female/dp/B00KTHGDCS/ref=sr_1_2?ie=UTF8&qid=1451355348&sr=8-2&keywords=RCA+to+minijack

but it depends on what connectors are on your TT. You may need hte female plugs instead of the male.

As for the receiver/speaker setup, you need to buy speaker wire to connect them.

http://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y/ref=sr_1_3?ie=UTF8&qid=1451355387&sr=8-3&keywords=speaker+wire

u/e60deluxe · 2 pointsr/hometheater

your receiver has a powered zone 2.. you can run 2 more speakers out of it. you can run four if you wire the speakers together (parallel), but you wont get as much power and they wont be able to be controlled independently.

if you want to control them independently you want a multizone amp and/or volume dials.

examples:

http://www.amazon.com/Speaker-Impedance-Matching-White-Ivory-Almond-Controls/dp/B004TLAGQY/

a Center is pretty crucial if you dont have a centered or somewhat centered seating sports. a Subwoofer can be lived without for some time, if necessary.

i would go with outdoor speakers on the patio, mostly because they are weather resistant and secondly, is that they are designed for open air. (although you can generally EQ that into shape)

you just need any speaker wire.

http://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y

u/ericbm2 · 2 pointsr/BudgetAudiophile

Of course, you can buy the wires longer or shorter depending on your needs. And the brand doesn’t really matter.

This kind of cable for receiver -> speakers: https://www.amazon.com/dp/B006LW0W5Y/ref=cm_sw_r_cp_api_i_PHcACb67FBW98

This for receiver-> subwoofer: https://www.amazon.com/dp/B01D5H8GYG/ref=cm_sw_r_cp_api_i_sIcACbEKE23WA

You will need to hook a music/sound source to the receiver. It’s up to you how you want to do that.

u/sk9592 · 2 pointsr/hometheater

AV Receiver ($140): https://www.accessories4less.com/make-a-store/item/denavrs530bt/denon-avr-s530bt-5.2-ch-x-70-watts-bluetooth-a/v-receiver/1.html

Left and Right Channels ($99): https://www.amazon.com/dp/B008NCD2LG

Center Channel ($99): https://www.amazon.com/Pioneer-SP-C22-Designed-Channel-Speaker/dp/B008NCD2EI/

Subwoofer ($120): https://www.amazon.com/dp/B00AJHAZZ4

Speaker Wire ($12): https://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y/

Subwoofer cable ($9): https://www.amazon.com/AmazonBasics-Subwoofer-Cable-15-Feet/dp/B01D5H8GYG/

High Speed HDMI Cables ($7, as many as you need): https://www.amazon.com/Monoprice-Certified-Premium-Ultra-Speed/dp/B074VBWPMZ/

The reason I recommend those specific HDMI cables is because I've never had any issues with Monoprice certified HDMI cables being able to properly transmit a 4K HDR signal.

u/rssvitamins · 2 pointsr/headphones

WAIT Your speaker cable is wrong! I'll find you one then edit in a sec

This is what you need
http://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y

Make sure 50 feets is long enough, they do 100 as well

The 3.5 mm to RCA is fine, theres a cheaper one here http://www.amazon.com/Monoprice-105597-3-Feet-Premium-Stereo/dp/B0094A1F3S

I had another look at the picture of the speakers, they have the type that unscrews so you don't need banana plugs.

You'll want to split about 5cm of that speaker cable apart from both ends, strip ~2cm of insulation off, unscrew the plastic plastic bits off the back of the speakers, feed the exposed copper into the little holes then screw them up tightly. You then have to trace the wire to the other end and connect them to the amp, connect the 3.5mm cable from your source (pc, phone w/e) to the RCA input on the amp, power it up and you're all set

u/JohnCryptoRambo · 2 pointsr/BudgetAudiophile

The speaker cables can be simple zip cord-

https://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y/

This receiver would fit the bill and is about as cheap as I can find from a reputable manufacturer.-

https://www.amazon.com/Onkyo-TX-SR373-Channel-Receiver-Bluetooth/dp/B06XVGCBZ4/

u/Copernican · 2 pointsr/BudgetAudiophile

I used the following setup for a cheap 2.0 system:

Amp: Lepai lp-2020a - $30

Speakers: Micca Covo-S - $40

Speaker cable: Amazon Basic 16 gauge - $10 for 100 ft

I think they sound great for the size and cost, but this set up isn't really going to scream bass!

Nice thing about this is that you'll have components for if you want to upgrade later. You want a 5.1 setup down the road? Well turn those covo-s speakers into your rear channels. Want to just get some bigger speakers later on? Well you'll have an amp that should do fine for a simple set up.


edit: the Lepai amp can be cheaply made. I had to exchange one after 1 month because the knob was wobbling and a channel went out. However the replacement has served me well for over a year now.

edit 2: to get the most of these speakers if you're placing them on your computer desk, you'll need to have them resting on something to slightly angle them up to you. Or put them on stands/mounts closer to ear level.

u/mikewilzn · 2 pointsr/CherokeeXJ

What's the point of spending that much money on speaker wire as apposed to just buying, for example, Amazon Basics?

u/Arve · 2 pointsr/audiophile

You need regular speaker wire like this: https://www.amazon.co.uk/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y

On the middle of the rear of the SMSL are four connectors labelled + and - (to the left and right speakers respectively).

Connect the + and - marked "Left Out" to + and - on the left speaker. And + and - on "Right out" to the +/- on the right speaker.

u/Sir0bin · 2 pointsr/hometheater

Yup, that subwoofer cable will work.


 

You can just buy a spool of speaker wire (like this) and that’s all you’ll need, although I recommend getting some banana plugs just to make it easier to unplug stuff if needed, but up to you.

u/Yolo_Swagginson · 2 pointsr/audiophile

Half my stuff is wired up with this

u/GrGoethals · 2 pointsr/audiophile

So you can see the row or red and black connectors on the back of the receiver, those are labeled for the available speaker locations. Standard speaker wire can be used on those as it kinda threads through then screws down tight (banana plug connectors can also be used if purchased). The backs of the speakers have a matching red and black connection that the wire screws into as well. So each speaker will have one red and one black connection.

In my case with this specific setup I am using the amplifier in a bi-amp configuration where I am utilizing the 'Front A' connections for left and right as well as the 'bi-amp' connections. The Klipsch speakers have 2 red and 2 black plugs on the back of them for this purpose. When Bi-amp'ed the speakers are able to use the extra power that another channel may use to give more clarity and over volume.

u/isgrimner · 2 pointsr/hometheater

I'm not much more than a newbie myself.

  1. I don't think it matters that you have mixed brands as long as the speakers are compatible with the receiver you choose. I'm thinking along the lines of Ohms and sensitivity. I have my Denon receiver, I'm using Pioneer floor standing speakers and center channel, and am using some old Onkyo surrounds and sub I had from an older setup.

  2. Amazon sells good spools of speaker wire that will work great for you and its good but cheap. I'm sure 16 gauge will be fine for your needs as its thicker than what comes with a lot of speakers.
    https://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y/ref=sr_1_3?ie=UTF8&qid=1484173113&sr=8-3&keywords=speaker+wire

    I bought banana plugs for my newest speakers and AVR. However my old Onkyo surround speakers have the spring loaded clips style connection. So the banana clips wont work with them. https://www.amazon.com/gp/product/B01E0E5CIG/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1


u/Ph0X · 1 pointr/hometheater

Ended up getting something completely different.

Got this receiver from amazon:
http://www.amazon.ca/gp/product/B010BHSXYQ

although for 550$

I also got this full audio set from shop.ca:
http://www.shop.ca/c/jbl-nightlife-home-theatre-speaker-package-nightlife-Nightlife-Speaker-Package-24866196

Price shown there (but it's out of stock now of course).

After further research, I also had to get the following cables to set it all up:

http://www.amazon.ca/gp/product/B006LW0W5Y

http://www.amazon.ca/gp/product/B005LJQMZC

And an HDMI cable

It's very different than everything here, but yeah the deals in my main post ended up running out so I had to find something else. I believe those were good deals and I'm really enjoying the setup now.

But yeah I'm not really an audiophile either so I can't really help you much more than tell you what I got, which isn't really on sale anymore so not worth getting maybe? Although this receiver is amazing so far, even if I have nothing to compare it against.

u/ZeosPantera · 1 pointr/Zeos

The lepai takes RCA so you need an RCA to 3.5mm and some speaker wire.

u/ahatzz11 · 1 pointr/Zeos

Is using a plug the only way to connect the Micca? I also can't seem to find a picture of the back of the Fluance speakers, are those able to be used with plugs?

I'm going to assume that the amazon basic wire that you linked in OP is good.

u/Alabaster13 · 1 pointr/hometheater

I thought about that ....lol.

Yes his recommendation was 1 or 2 8' subs. Way too small.

Regarding wiring will this be ok for the sub and for the speakers?
https://www.amazon.com/gp/aw/d/B006LW0W5Y/ref=ox_sc_act_image_3?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

https://www.amazon.com/gp/aw/d/B003FVYXY0/ref=ox_sc_act_image_5?ie=UTF8&psc=1&smid=A1DCPNQKKEISZB

Do you know the best place that I could try and sell my soundbar other then eBay or craigslist. I would love to get this system going.

u/Lowoctave · 1 pointr/audiophile

Just wondering if anyone can approve(or improve) the following list for my PC set up before i place the order. My budget is $200 for a 2.0 system. I will be purchasing a sub in the future to upgrade to 2.1.

Behringer UCA202 Audio Interface, $29

Speakers: Micca MB42X, $80

Amp: MUSE M50 EX, $68

Wiring: AmazonBasics 16-gauge Speaker Wire, $7

Total: $184.00 USD

Got some RCA wires that I will be using.

Please let me know your feedback or if there are cheaper options I can go with.

Thank you in advance

u/atworksoonlysfwforme · 1 pointr/vinyl

Hey reddit I'm looking at getting a nice little starter set up going. My budget is £300, i'm looking at getting:

Pro-Jec Elemental: £159

Behringer PP400 Microphono Ultra Compact Phono Preamp assorted colour: £20.29

Roth Audio OLI RA1 2 Way Pair Of Bookshelf Design Speakers - White: £79

LEPY 2024A Plus Amplifier: £13.45

AmazonBasics 16-Gauge Speaker Wire 1.3 mm² / 100 Feet: £9.49

Total: £281.63

Would this be a good set up to be able to replace things as I go and as my collection grows? I'm totally new to this so any advice would be wonderful!

u/Stevo592 · 1 pointr/hometheater

I will probably get flak for doing this but here you go:

Sony SSB1000 ($55) These speakers are pretty good for how cheap they are. Much better than the Micca Covos.

SMSL-SA-50 ($68) I have this amp and it is awesome how much it puts out. I see the people all the time recommend the Lepai LP-2020 for cheap setups but ignore that amp. Get this one.

There you have it. Cheap setup that is entirely expandable. Get some Banana plugs and some cheap speaker wire.

Later on if you save your pennies you can buy something like the dayton sub for about 100 bucks and will fit nicely with that setup.

u/jallsopp · 1 pointr/BudgetAudiophile

For an accurate recommendation, it would be useful to know what you want to use them for. They seem to be a mix between a PA speaker and a Hi-Fi speaker.

For an amp, depending on the use, you can have pretty much anything. You could probably get away with this although for these I would reccomend something more powerful like this. Please note that I live in the UK not USA so my reccomendations come from this useful guide in r/zeos.

Generally you will want to make the most out of your speakers so a PA amplifier would be the way to go. Connecting this is easy. very easy. On the back of your speaker, there is two different ways to get signal to it. The first jack (the larger one at the top) is a quarter inch jack. This is the better option although it is only usually featured on PA amp's and it is generally more expensive. Here is one of them cables; you will need two if you want both speakers. The other option is just general speaker wire. This is an example. Of cores it's not the best, you really should look for a higher gauge although it will work.

u/TactFully · 1 pointr/buildapc

Unfortunately £100 is just around the lower limit of the very-entry level, not really mid-range if we're going to be honest.

The easy solution is M-audio AV-40s. They are 'powered monitors' so the amplifier is inside, all you have to do is feed them signal.

Alternatively, you could go for "passive" bookshelf loudspeakers and an amplifier. The advantage to this route is that you can upgrade the speakers or amp separately (edit: also each individual component is probably at least a bit better than the av40s, and if anything ever fails it can be replaced separately; it's just more flexible overall). There's some extra work involved but it's not difficult..

These Wharfedale 9.0 should be good for the price (the Diamond 9.1 were reviewed by Stereophile and they measure well for the price).

You'll need an amp, speaker wire, and some banana plugs are helpful. Oh, and probably a 3.5mm stereo to 2RCA cable to connect your 3.5mm source(s) to the amp.

How much better are either of these compared to tiny computer speakers like Logitech or Creative etc.? Much better.

u/Skeeter_206 · 1 pointr/hometheater

I just ordered these items to build a surround sound system for my living room.

Klipsch - Quintet V 5.0 - On Sale at Newegg for 249.99, Regularly 599.99

Polk 10" Powered Subwoofer On sale at Amazon for $77, regularly $239

Pioneer VSX-530-K 5.1 Receiver On sale at Amazon for 189.99 regularly 279.99.

100 ft 16 gauge speaker wire $10.99 at Amazon

All in all, I bought $1130 worth of audio equipment for $527 dollars.

u/Erroon · 1 pointr/CarAV

And since you are using the stock head unit (just as I am, no worries), you are going to want to tap into probably your rear speakers for a signal, so you are going to need some 16-18 gauge speaker wire and some crimp caps (or solder them to connect), a wire stripper/cutter (though ultimately an X-acto blade would work, just be creative), and probably some screw drivers to take off and pop off some trim panels to access your rear speaker's positive and negative wires (the alternative is to take apart your dashboard, find I wiring diagram, and splice into the speaker power there and run the cables to the back of your truck...)

I personally have used the Amazon Basics speaker cable in a bunch of projects (mostly indoor, but I've got like 70 feet of it running from the front of my car to my trunk and back, a few times over) and it works just fine for me... It was really cheap and held up, stripped, and cut, all quite nicely...

http://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y

It IS CCA, but unless you're really going for Audiophile sound or pushing alot of power, you won't notice a difference in sound. I would probably order 100 feet because it's alot easier having too much wire for 3 extra bucks, than not having enough...

u/dr_torque · 1 pointr/audiophile

To answer your other question, you're looking for a 3.5mm mini jack to RCA cable, something like this. As far as speaker wire goes, this'll do, but this sort of thing is a bit more convenient as it is terminated with banana plugs - you won't have to faff around with bare wire.

u/deepestcreepest · 1 pointr/vinyl

They're somewhat expensive online. If you could check your local craiglist or thrift store you could perhaps score something. 18-16 Gauge wire would be fine.
http://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y/ref=sr_1_3?ie=UTF8&qid=1453430042&sr=8-3&keywords=speaker+wire

u/Grey406 · 1 pointr/oculus

This was a super cheap build and the prices have changed since I made mine, nor is it the best but: Dayton pucks 16ohm - USB DAC 3.5 - Cheap amplifier - 12v Power Brick - 3.5mm to RCA cable - 16awg speaker wire

You'll also need some small wood screws to attach the pucks to the chair, zip ties, and a couple of wire nuts or you can solder the wires together. If your computer has a front headphone jack that can be its own output independent from the rear jack (like most Realtek onboard audio) you can omit the USB DAC.

You will want to wire up the pucks in PARALLEL (see example 3) so the amplifier only sees an 8ohm load.

I don't know about an amp for the Aura since I don't use them and you'd have issues running one amp for different powered transducers, they all need to have the same wattage

u/sonsofaureus · 1 pointr/AskBattlestations

>My concern would be the ease at which they adjust. If the stands are somewhere less than accessible, or are difficult to adjust, it would defeat the point of this use case.

Usually with stereo or surround sound speakers/woofers, they have an ideal position relative to the listener.

The challenge is usually with getting the wires and power to those position to allow ideal placement. Once there, there isn't a great need to fiddle with the speaker position too much afterwards.

I think it's more important that a speaker stand/mount be sturdy and stable than be easily adjustable. IMO, just something that'll let you place the speakers at the right distance from you at the right height, and maybe help manage wires would do.

If you have walls (and you're able to drill into those walls), speaker wall mounts are an affordable option.
If you have space around your desk, a speaker stand is a good way to go also.

Otherwise, if you have the room, you can add drawers/file cabinets to the sides of your desk to extend your desktop a bit, or get a bigger desk like you mentioned.

I would also suggest picking up some speaker wires.

u/connoleg · 1 pointr/sonos

I disconnected the speakers then extended the wires with crimps so that I kept the original wires and crimps intact. Speaker posts use crimp type male connections so was easy to make the connections.

Very important to use two way speakers with the crossover board taken out of the circuit. My speakers had connections to the crossover using same crimp connectors so I wired straight on to them.

Ensure you get the Woofer and Tweeter pairs the right way around. I confused them the first time and the sound was distorted, flipped them around and Bingo!


Vimmor 4-Pack 4mm Banana Plug... https://www.amazon.co.uk/dp/B07KLRH5GM?ref=ppx_pop_mob_ap_share

AmazonBasics 16-Gauge Speaker... https://www.amazon.co.uk/dp/B006LW0W5Y?ref=ppx_pop_mob_ap_share

Terminals Crimping Tool with... https://www.amazon.co.uk/dp/B07RXR25JG?ref=ppx_pop_mob_ap_share

u/jakethebavarian · 1 pointr/hometheater

I'm a little confused if you're saying $500 for speakers alone, or the set up. Heres a list I put together for a friend who had the same budget. Hope this helps.

($200) http://amzn.com/B00B981F38
($10) http://amzn.com/B006LW0W5Y
($12) http://amzn.com/B005EZTUMU
($130) http://amzn.com/B00067OS0A
($130) http://amzn.com/B004LRPXAU

Edit: If you go this route, don't forget these.

http://www.amazon.com/Mediabridge-ULTRA-Series-Subwoofer-Cable/dp/B003FVYXY0/ref=pd_bxgy_e_text_y

http://www.amazon.com/Mediabridge-ULTRA-Series-Y-Adapter-Inches/dp/B004EBX5GW/ref=pd_sim_e_4?ie=UTF8&refRID=0HP63MCWR61GRJ58Y5BY

u/DeafGamerDucky · 1 pointr/oculus

I checked my motherboard to make sure it can take aux cable and seem it does. I found a good one. Aux to RCA Now for open cables. would that be one for a example?

Also I am not sure how to power that amp...do I need to buy power supply for it, or it come with it?

u/thjord · 1 pointr/audiophile

New to this! I recently got this big ass speaker for free while moving, and I'm trying to get it set up. Problem is that I don't have any idea what I'm doing. I also have no details about the speaker itself in terms of impedance or really anything.

I'm pretty sure I need a power amp (like this?) to power it (connected using standard speaker wire and maybe banana plugs), and I'm also wondering if I should get something like this Monoprice hybrid tube amp to serve as a preamp.

Am I on the right track?

u/Captain_of_Reddit · 1 pointr/buildapcsales

So something like this and I should be all set ?:

1.Speaker Wire

2.3.5mm to 2RCA

3.Lepai 2020A

4.Insignia Bookshelf Speakers

___

Thanks a lot!

u/zeissplanar · 1 pointr/audio
u/RaRoC · 1 pointr/BudgetAudiophile

So after watching reviews I will need to buy longer cables will this cables work fine?

AmazonBasics 16-Gauge Speaker Wire - 100 Feet https://www.amazon.com/dp/B006LW0W5Y/ref=cm_sw_r_cp_apa_i_InY3BbFEFP46X

FosPower (10 Feet) 24K Gold Plated Toslink Digital Optical Audio Cable (S/PDIF) - [Zero RFI & EMI Interference] Metal Connectors & Ultra Durable Nylon Braided Jacket https://www.amazon.com/dp/B00T6OVQYU/ref=cm_sw_r_cp_apa_i_XnY3BbFEKAX5P

Edit: Also I would like to run the speaker wire through my ceiling tiles that would be no problem?

u/Airiq49 · 1 pointr/BudgetAudiophile

Utilizing this sale, I'm hoping to upgrade from my built-in TCL TV speakers. Any thoughts or input on this setup before I buy?

Receiver:
DENON AVR-S640H

Speakers:
ELAC Debut 2.0 B6.2 Bookshelf Speakers

Center:
ELAC Debut 2.0 C5.2 Center Speaker

Subwoofer:
BIC America F12 12-Inch 475-Watt Front Firing Powered Subwoofer

Speaker Wire: AmazonBasics 16-Gauge Speaker Wire - 100 Feet

Things I'm not sure about yet...

Speaker stands? Center speaker stand/raiser? Any wires for sub to connect to receiver (or anything else I'm missing)?



Here is a picture of the room. TV is a touch higher than usually recommended because I wanted the ability to see it over the top of my monitor as I work. Thank you!

u/Skitch_n_Sketch · 1 pointr/audiophile

That is a headphone amplifier, you can't hook it up to speakers. You need a speaker amp with these terminals. Use Speaker Wire to hook them up.

u/rms_is_god · 1 pointr/audiophile

Looking at an entry level computer speaker setup, mix of gaming and music, maybe some movies but not a priority.

Budget was 100$ but I blew through that my first hour of reading Zeos' guides. New budget is 200$ or as close to that as possible with great sound.

  • Micca MB42X @ $99.95 - Very sold on these
  • Topping TP21 @ $68.50 - Toss up between this and the SMSL SA50, but I eventually want to get a BD DT770
  • 3.5mm to RCA 6' @ $7.70 - any quality difference between this and eventually getting a DAC and going optical? probably not worth it for an entry build...
  • 12 Pair Banana Plugs @ $16.99
  • 100' 16g Cable @ $9.82
  • Total @ $202.96

    I live in a more remote state with very sparse options on craigslist, and I've only had bad experiences with eBay.

    Questions:

  1. TP21 running the BD DT770? Should be able to handle it pretty well right?
  2. Can I get away with using scissors instead of cable strippers? What if I'm reeeaally careful?
  3. Do I need a sub? I feel like that's a bit much at this point
  4. Can I blame the internet if I get buyer's remorse?
u/TheLastOne0001 · 1 pointr/funny

They probably paid too much for Monster cables



For the people that dont know, Monster is horendously over priced
Monster vs normal

u/simpsons403 · 1 pointr/BudgetAudiophile

This is extremely helpful. I think I'll pass on the Yamaha 5.1 entry set since I'd rather not replace everything. I'm leaning toward this 2.0 setup now (let me know your thoughts):

  • Pioneer VSX-530 refurb
  • BIC DV62 bookshelf speakers w/ mounts

    Next up do you think it would be better to add a sub or a center?

    I'm sure I can find a good tutorial for wiring speakers and setting up a receiver, but do you know of any off the top of your head?

    Right now I have HDMI for all of my gaming consoles (straight from console to TV). I guess I didn't realize that the receiver was going to be able to transfer video also. So that sounds like the solution... everything w/ HDMI plugged into the receiver and then 1 extra HDMI cable from receiver into the TV? Is that right?

    EDIT: Also, is there specific quality speaker wire that is needed? Just a quick Amazon search brought this up. Good enough? Any recommendations? Do I need banana connectors that I've heard some people talk about on here?
u/jefesteeze · 1 pointr/audiophile

Get a basic 5.0 system, then add a sub. This should be good value for music and movies. I'm partial to Denon/Marantz for their musical audio quality, but some other folks on this sub may know a cheaper receiver that still sounds good. The speakers are definitely the best bang for your buck, but you could get higher quality speakers for music if you did a 2.1 instead of surround sound. Based on the 4K TV, I'm assuming you're going to be watching movies/tv more than you listen to music.

u/hikingmutherfucker · 1 pointr/audiophile

Look at the proposed systems above both are small enough to fit on a desktop and are fairly cheap as well.

to quote: "

In an effort to cut down on some of the repetitive questions, here are the absolutely cheapest systems we are willing to recommend.

  • $110: Micca PB42X
  • $250: JBL 305P MkII

    Accessories

    For the JBL-based setup, here are some accessories if you want to connect the speakers directly to a computer without an external DAC:

  • 3.5mm TRS to 6.3mm TS cable - use this if you're connecting the LSR305 directly to a computer
  • JBL Active Speaker Starter Set - includes the Nano Patch+ volume controller, two isolation pads and TRS to XLR cable. Use this if you want a physical volume controller to go along with the JBL speakers.

    For the Micca setups, you'll need this to connect directly to a computer:

  • 3.5mm TRS to RCA - use this for connecting (either of) the Micca alternatives directly to a computer.

    If you're going for the Micca MB42X + SMSL solution, you'll also need speaker wire:

  • AmazonBasics 16 AWG speaker wire "
u/thx1138jr · 1 pointr/hometheater

Are you sure about the equipment? The R-S300 is a stereo receiver not an amp. At least that's what I am seeing. It is a basic stereo receiver that you can connect two sets of speakers to, one set for a CD player and the other for a turntable or tape deck. All you need is regular 16 gauge speaker wire (https://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y).
Here is the manual for that receiver. Just check it out and you should be good to go. (https://pdf.crutchfieldonline.com/ImageBank/v20101114104300/Manuals/022/022RS300.PDF)

u/rubixd · 1 pointr/audiophile

Simple question, hopefully.

FAQ Suggets... Amazon Basics 16AWG Speaker Wire.

How do ya'll feel about Monoprice 14AWG Braided Speaker Wire with Gold Plated Banana Plug?

u/SmittyJonz · 1 pointr/BudgetAudiophile

Ok Now - just spent some Time on Amazon ca -

I'd get this One: 1st Choice

https://www.amazon.ca/gp/offer-listing/B07F2RQJLK/ref=dp_olp_new?ie=UTF8&condition=new

or

https://www.amazon.ca/Yamaha-RX-V385-5-1-Channel-Receiver-Bluetooth/dp/B07BNXXJKB/ref=pd_sbs_23_8?_encoding=UTF8&pd_rd_i=B07BNXXJKB&pd_rd_r=95848bb4-a00b-4786-b310-aabfc90cd1fb&pd_rd_w=WrdyX&pd_rd_wg=Kw0Qf&pf_rd_p=5dcda75b-8643-4da3-9bb1-5c0233790500&pf_rd_r=VSPMMY9VMY2MDHXMJFTK&psc=1&refRID=VSPMMY9VMY2MDHXMJFTK

​

2nd Choice:

https://www.amazon.ca/Pioneer-Atmos-Ready-Component-Receiver-VSX-832/dp/B06Y5M9WQD/ref=sxbs_sxwds-stvp?keywords=5.2+avr+receiver&pd_rd_i=B06Y5M9WQD&pd_rd_r=bc4101d6-931f-4244-acb9-405c83e9a26b&pd_rd_w=m1PL0&pd_rd_wg=kug5A&pf_rd_p=25609a94-16af-4bd7-9107-c9f01f8c9bd0&pf_rd_r=MQREDPB4Z9VXKBNZJ9G7&qid=1563606471&s=gateway

3Rd:

https://www.amazon.ca/Sony-STRDH590-Multi-Channel-Bluetooth-Component/dp/B078WG7HZY/ref=sxbs_sxwds-stvp?keywords=5.2+avr+receiver&pd_rd_i=B078WG7HZY&pd_rd_r=bc4101d6-931f-4244-acb9-405c83e9a26b&pd_rd_w=m1PL0&pd_rd_wg=kug5A&pf_rd_p=25609a94-16af-4bd7-9107-c9f01f8c9bd0&pf_rd_r=MQREDPB4Z9VXKBNZJ9G7&qid=1563606471&s=gateway

​

PLUS:

https://www.amazon.ca/Fluance-Surround-Including-Bookshelf-Speakers/dp/B016OQ17FU/ref=sr_1_4?keywords=elite+5.0&qid=1563608239&s=electronics&sr=1-4

https://www.fluance.com/sx-series-high-definition-surround-sound-home-theater-speaker-system-black-sx50bc

​

OR

Get 2 Towers for Starters

1st Choice:

https://www.amazon.ca/Pioneer-SP-FS52-LR-Designed-standing-Loudspeaker/dp/B008NCD2S4/ref=sr_1_2?keywords=SP-FS52&qid=1563607634&s=gateway&sr=8-2

2nd Choice

https://www.amazon.ca/Polk-Audio-T50-Speaker-Single/dp/B013LIN5W2/ref=sr_1_fkmr0_1?keywords=Jamo+Floor+Standing+speaker&qid=1563608592&s=gateway&sr=8-1-fkmr0

​

OR: be like Me n Run 3 of these for R /C / L - (be sure to get the X series - has crossover and Much better)

https://www.amazon.ca/Micca-MB42X-C-Channel-Speaker-Tweeter/dp/B00HHFBEK6/ref=sr_1_fkmr0_1?keywords=Micca+MB42XC+renewed&qid=1563608724&s=electronics&sr=1-1-fkmr0

these for surrounds (linked MB42 but I run MB42X but they aint showing on Amazon ca right now.......)

https://www.amazon.ca/Micca-MB42-Bookshelf-Speakers-Tweeter/dp/B009IUIV4A/ref=sr_1_2?keywords=Micca+MB42X&qid=1563608837&s=electronics&sr=1-2

But I'd rather have the Fluance 5.0 set above - I picked the Miccas cuz I run a Samsung BluRay 5.1 HTIB not a true receiver (Yet)

My lil system : (Iphone recording does NOT Do it Justice......)

https://www.youtube.com/watch?v=kp9__MF0RGQ

https://www.youtube.com/watch?v=LX336vCpkb4

​

Speaker Wire:

I'd run these on R /C /L

https://www.amazon.ca/dp/B01M70KLL9/ref=twister_B01M28BPRF?_encoding=UTF8&psc=1

this for surrounds:

https://www.amazon.ca/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y/ref=sr_1_1?keywords=Amazon+basics+speaker+wire&qid=1563612058&s=hi&sr=1-1-catcorr

​

ADD a Subwoofer Later.........

1st Choice

https://www.amazon.ca/BIC-America-F12-475-Watt-Subwoofer/dp/B0015A8Y5M/ref=sr_1_6?keywords=Fluance+subwoofer&qid=1563607187&s=gateway&sr=8-6

2nd Choice

https://www.amazon.ca/Dayton-Audio-SUB-1200-12-Inch-Subwoofer/dp/B00669L3HS/ref=sr_1_fkmr1_2?keywords=Dayton+Audio+sub+2000&qid=1563607379&s=gateway&sr=8-2-fkmr1

u/TheMcDingles · 1 pointr/audiophile

Recently bought all of these for my setup:

ELAC Debut 2.0 B6.2
https://www.amazon.com/dp/B07B4Q5587/ref=cm_sw_r_cp_api_i_npDqDb6JW8GTR

Dayton Audio SUB-1000
https://www.amazon.com/dp/B0063NU3AA?ref=ppx_pop_mob_ap_share

Yamaha R-S202BL
https://www.amazon.com/dp/B01EMQI2CU?ref=ppx_pop_mob_ap_share

AmazonBasics 100ft 16-Gauge Wires
https://www.amazon.com/dp/B006LW0W5Y?ref=ppx_pop_mob_ap_share

AmazonBasics Speaker Connector
https://www.amazon.com/dp/B01MQHBQXF?ref=ppx_pop_mob_ap_share

I hooked up the system without the sub first and everything sounded great. When my sub came in, I used the high end input/output hookups on the sub and tried to dial everything in. However, now my speakers sound a little off from what I remember (even after disconnecting the sub and rewiring as I originally had it).

Is there anything wrong with my equipment power wise that could damage other equipment? Could I be wiring components together wrong? I'm new to high end equipment and trying to learn/research as I go (even a simple "everything looks right" is beyond helpful).

u/Umlautica has helped me so far with the sub phase and making sure everything is hooked up to the same polarity, but it's still sounding a bit off

u/blackjakals · 1 pointr/BudgetAudiophile

Any standard 16 gauge speaker wire should do. It comes in rolls of 50ft, 100ft, or even shorter. You can purchase it from Amazon even. Like so:
https://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y

u/D1rtymaca1 · 1 pointr/BudgetAudiophile

wharfedales5.1 , yamaha . Think Yamaha an whalfedale are a great match , both have a natural sound , see better reviews and specifications here and here don’t forget speaker wire

u/egamble · 1 pointr/audiophile

You just need speaker cable, this will do https://www.amazon.com/dp/B006LW0W5Y or if you want it to connect easier https://www.amazon.com/dp/B06ZZ5HCTM

u/sobusyimbored · 1 pointr/cableadvice

To connect the speakers to the subwoofer you can use any standard speaker wire. One Example. They come in different lengths and colours so just go with whatever suits your setup best. You can buy one reel and cut whatever lengths you need.

The picture of the TV is showing an AV input. This is not where you connect the speakers to the TV. You need to look for an audio output port. Sometime it will have just a headphones port but that will work as well. If it is just a headphone socket you'll need a 3.5mm to RCA Phono cable. One Example.

These are all fairly standard cables that can be found in any electronics or computer store. Even some supermarkets would carry these.

u/Zeeall · 1 pointr/audiophile

That amplifier seems decent. But you can do better.


You are going to need speaker wire and a interconnect cable.


Speaker wire is easiest bought in bulk. You get a roll of 50-100 feet and cut of as much as you need(equal lenghts to both speakers).
Interconnect cables are labled depending on their connectors. You likely need a 3.5mm to 2 x RCA.


Here are two popular and cheap options.
https://www.amazon.com/AmazonBasics-16-Gauge-Audio-Stereo-Speaker/dp/B006LW0WDQ/

https://www.amazon.com/AmazonBasics-16-Gauge-Speaker-Wire-Feet/dp/B006LW0W5Y/

​

https://www.amazon.com/AmazonBasics-3-5mm-2-Male-Adapter-Stereo/dp/B01D5H8JW0/

u/Riebeckite · 1 pointr/audiophile

Does this equipment list work together?

I'd like to play sound from my computer and my TV to the same pair of speakers. I'm mostly worried that the receiver is correct for this and has enough power for the speakers.

u/StrikeOne33 · 0 pointsr/hometheater

There's nothing fancy about speaker wire, just buy the cheapest spool of speaker wire you can find. Like this: https://www.amazon.com/dp/B006LW0W5Y/ref=cm_sw_r_sms_c_api_ISi3xbMYN53WN