Reddit Reddit reviews Apollo Horticulture Pair of 1/8" Adjustable Grow Light Rope Hanger w/ Improved Metal Internal Gears

We found 18 Reddit comments about Apollo Horticulture Pair of 1/8" Adjustable Grow Light Rope Hanger w/ Improved Metal Internal Gears. Here are the top ones, ranked by their Reddit score.

Gardening & Lawn Care
Indoor Gardening & Hydroponics
Plant Growing Light Fixtures
Patio, Lawn & Garden
Apollo Horticulture Pair of 1/8
Pair of 1/8" Heavy Duty Rope HangerWeight Capacity - 150 PoundsRope Length - 7 Feet 7 InchesRope Material - Braided PolypropylenHook Material - Zinc Plated Steel / Metal Internal Gears
Check price on Amazon

18 Reddit comments about Apollo Horticulture Pair of 1/8" Adjustable Grow Light Rope Hanger w/ Improved Metal Internal Gears:

u/throwawayCG48 · 6 pointsr/microgrowery

First grow.

This took 2-3 months. Seems like I ran into a number of first-timer pitfalls along the way. Good learning experience though.

Can't wait. So god damn tired of shady, undependable hook ups.


Edit 2:

Photos of my setup.

u/NewGreenBeginnings · 5 pointsr/Autoflowers

I had the same concern at first. These came with my light (MarsHydro 900w LED), but probably a cheaper knock off version. Worked great! I always held the beams the light hangers were secured to when i moved the lights up higher as they tended to flex. Since i was very paranoid i used paracord secured to the top side tent beams in case the light fell when i wasn't home. i can happily say i didn't need to do that since the light never fell, but small price to pay for peace of mind though. Hope that helps!

u/huhthatscool · 3 pointsr/aeroponics

I actually didn't tally up the cost as that wasn't really of a concern to me, but I'll try my best to provide links to the things I bought for this. Feel free to add it up for me!

u/Dr_Burns · 3 pointsr/microgrowery

Edit: link link to 250w setup for $131
PS the yoyos are crap dont even try them. just buy the correct ones. yoyo's i dont have these cause i bought the expensive ones, but i hear these are good.

u/LittleElectric · 3 pointsr/succulents

My light also came with the same kind of diagram, I have it about 12" away at 1070 "PAR" and everyone has very good stress coloring and are loving it. I wouldn't set up the light to be at that distance right away, however, since they won't be used to the light, I started out about 2 feet away and moved it closer every few days to get them used to it. I got these little rope hangers so it's easy to adjust the height.

Both of the lights you've linked will do super! You want at least 60w, since wattage will determine how close you have to put it to be effective (with 60w you'll want plants to be like 6inches away for it to be effective, less wattage and you basically have to have them touching), and then you'll look for full spectrum (6500k).

I have this light: https://www.amazon.com/VIPARSPECTRA-Reflector-Spectrum-Indoor-Plants/dp/B01B4GQ6MO

It's doing well covering a 2ftx2ft square shelf. I have about 20 plants under it and the next shelf down gets some trickle light because it's just a metal shelf and all my props are doing good under there.

u/615wonky · 3 pointsr/microgrowery

Start small. It'll save you money, let you get your feet wet, and help you learn how to grow better, and then you can buy bigger.

My "starter package" is:

  • A 2' x 2' x 3' grow tent - $55.
    https://www.amazon.com/gp/product/B00SWGYYWO

  • A grow light ($90). I prefer COB's as they're easier to fix than blurples.
    https://www.amazon.com/gp/product/B01I4NY8KW

  • A power strip zip-tied to a pole in the tent. Makes wiring prettier and easier. ($24) I chose a nice metal one, but you can use a cheaper one.
    https://www.amazon.com/gp/product/B00F8ZQYHA

  • Hangers to hold the light ($8)
    https://www.amazon.com/gp/product/B0098R0600

  • A fan and filter ($70), and variac ($90) to filter smell and move air to keep things cool. This combo is overkill for this tent, but I ended up using it on later tents so it's a good long-term investment. You can cobble something cheaper together with some work, but this "just works" out of the box.
    https://www.amazon.com/gp/product/B004Q2ER5C/
    https://www.amazon.com/gp/product/B006NGI8VS

  • 5 gallon Smart Pot ($7) for growing, FoxFarm Ocean Forest Soil ($16.50), Plant saucer ($7) for growing. You can save some money here by shopping around. In particular, Amazon's price for FFOF is about double what I pay at the (very expensive) local "indoor gardening" center.
    https://www.amazon.com/Smart-Pots-5-Gallon-Soft-Sided-Container/dp/B002JUOWB2
    https://www.amazon.com/FoxFarm-FX14053-12-Quart-Organic-Potting/dp/B001I49Q98
    https://www.lowes.com/pd/Garden-Treasures-15-31-in-Rust-Plastic-Plant-Saucer/50445000

  • Go Box Plant Nutrients. This should last you several grows.
    https://www.amazon.com/gp/product/B004PS4B08

  • Seed of your choice (let's say $10).

    So for about $420 (heh), you can get your foot in the door and start growing. This is a nice setup too, you can probably save $100 by shopping around, buying used, or doing-it-yourself. I've left off a few odds and ends like dryer duct, Fiskers for trimming, weed fabric pins for low-stress training, pitcher for watering, Mason jars for storage, but you can likely find those or suitable replacements around the house without spending money.

    I also have a Raspberry Pi 3 ($43) with Sense Hat ($37) and metal case ($15) in each of my grow tents to log temperature/humidity and other things. I'm interested in eventually using the GPIO functionality to water my plants too. Not critical, but definitely a nice thing to have, especially if you're the hacker type. If you go this route, you might look at raspiviv.com too.
    https://www.amazon.com/gp/product/B01C6FFNY4
    https://www.amazon.com/gp/product/B014HDG74S
    https://www.amazon.com/gp/product/B0722L338Q

    I'm glad I bought a good intro setup because I still use it now that I've upgraded. I now have a 3' x 3' GG Shorty tent with HLG 300 LED for flower, a 2' x 2.5' GG Shorty tent with two 400W Roleadro COB's for veg, and my "intro package" is now my germination/cloning tent (and drying tent too since several people suggested that too). Being able to have three tents (germination -> veg -> flower) working simultaneously is increasing my output quite sharply. I'm doing this to help a relative with cancer, so you may not need to go quite as crazy as I did.

    You mentioned using 35+ gs (~1.25 oz) a month. You probably aren't going to be able to grow that much given the constraints of tent size and light wattage (plus being a first-time grower! You'll learn a lot!). So once you get used to it, you'll probably want to buy more stuff. Marijuana isn't addictive, but growing marijuana absolutely is.

    Once you've got your hardware, the variable cost is seed (~$10), soil (~$5), nutrients (~$20), and electricity (~$30). From that, I'm going to estimate you can grow ~1.5 ozs (you can do more as you learn more though). So you're looking at ~$40/oz after you've made the initial hardware investment.

    Hope this helps. Depression, cancer, and everything else can just go suck it.
u/Iggy0075 · 2 pointsr/microgrowery

My Setup:

u/d3vw3b · 2 pointsr/microgrowery

Awesome to hear! Yeah I scoured the net too and tried a few designs before deciding on this one. It's just a simple PVC frame I hung from the top of the tent using adjustable light ropes.

Here's the materials with some example links and short instructions. I was sort of winging it at the time I built.... so let me know if you have any more questions and I can take some closer pictures of the screen or something. :)

 

Materials |
---------|
| 1" Schedule 40 PVC pipe - Frame edges. |
| 1" Schedule 40 PVC 90 degree elbow. |
| 3/4" Truss-Head Screws |
| White Twisted Mason's String Line |
| Light Rope Hangers |

 

| Short Instructions |
----------|
| 1)) Measure out Length x Width you'll need for frame pieces. (accounting for the inch or two that gets added by the elbows when they're on) |
| 2)) Cut 4 pieces of pipe to desired length and fit them together using the 90 degree elbows. I used a rubber mallet to make sure they were seated all the way into the elbows. |
| 3)) Once the frame is assembled, you may have to twist it a little to make sure it's completely flat. My first attempt was a little tweaked by having an elbow rotated slightly. I just twisted the frame a bit to fix it and made sure it laid on the ground completely flat. |
| 4)) Grab a ruler and start marking out the spots where you'll drill for the screws. I start at the elbow and make a mark every 2". Continue this all the way around. You'll want to make sure the holes lineup perfectly even with the holes directly across. Just for a visual aid, If the screen is leaning up against a wall - you'll want to mark the top & bottom edges first, then the left and right sides. This way you make sure you don't accidentally end up with any angled or diagonal strings going across when it's done. ;) |
| 5)) Drill the pilot holes in the side of the pipe you marked previously. I drill all the way through the pipe wall and stop when it hits the opposite wall. |
| 6)) Screw in the truss-head screws about 75% of the way. Just enough to make them secure but also leave enough room to wrap the Mason's String around. |
| 7)) Once all the screws are in, I pick one corner as a starting spot and I tie up the string there and bring it across to the matching screw. From there it's just a time consuming game of rounding the screw next to it, bringing it across, rounding the next screw, bringing it back across, so on and so forth. Whatever weaving technique you want to use here is fine. |
| 8)) Hang the completed screen at the desired height by attaching the adjustable light rope hangers and you're good to go! I threw some zip ties around the elbows and clipped the rope hangers to those. |

u/BeachBum09 · 2 pointsr/microgrowery

You can keep the light that far away from the plants throughout. You can also play with the height. Get those ratchet light hangers. They are adjustable. Like These

The 300w does not really cover much space. For reference in my tent I am growing 2 plants right now. I used only the 300w for veg and just let them veg longer to make up for the lack of light. No problems for me there. As for flower you'd want more than one if you are doing more than one plant. In my tent, as I said, I have two going right now. I have a 250w HPS that's over one plant and the 300w is over the other.

To summarize, the 300w will be perfect for one plant throughout the entire veg/flower cycle. The 300w will be adequate to veg 2 plants but not enough to flower. Maybe with your cfls and the new ones you are adding plus the 300w you should be good for 2 plants.

u/codec92 · 2 pointsr/microgrowery

First off, i'm simply recommending them, the stuff you got works but theyre a bit over priced so i'm going to recommend a few cheaper stuff.

You can get away with a 4'' fan/filter/duct with the grow space tent you provided. heres a recommended one.
https://www.amazon.com/gp/product/B004Q2ER5C/ref=oh_aui_detailpage_o08_s01?ie=UTF8&psc=1
Your tent and led is fine
Ph up and ph down is fine as well, i recommend getting a digital ph and ppm meter combo on amazon, doesnt matter if theyre cheap, they'll work.
As for your timer, i highly recommend this https://www.amazon.com/gp/product/B0042I5FF6/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
That timer will give you the ability to upgrade to two led if you want too in the future.
Don't forget hangers for the lights.
https://www.amazon.com/dp/B0098R0600/ref=twister_B00FL6MTJI?_encoding=UTF8&th=1
Everythign else seems fine.

u/[deleted] · 2 pointsr/OKmarijuana

For six plants all you need is a 400w HPS (high pressure sodium) bulb for veg and a 400w MH (metal halide) for flower, a 400w digital ballast, an enclosed light hood that you can raise and lower, a carbon filter connected to a 442 cfm duct fan connected to an aluminum foil duct hose, connect duct hose to the enclosed light hood, get some more aluminum foil duct to connect to the other side of the enclosed hood and have the other end of the duct hose going out of your tent or cab. wish I could post a pic of a custom cab I built. IMO I would go with a tent because you can always take it down if you want a break from growing. As far as what type of medium you are going to grow in e.g. hydroponics or soil that is up to you. Soil is easier as hydro doesn't give you much room for error you have to have everything dialed in almost exact like the ppms/temp/ph but once you get the hang of hydro your grows are much faster. If you use the 400w lights for six plants you will get maximum yield from your plants. For veg run the lights 24 hours and flower 12/12. Get a timer for your light bulbs when you decide to put your plants into flower so you don't have to worry about turning the light on and off, I'll include links for everything. Oh yeah I would not use seeds I would wait until dispensaries have clones that way you don't have to wonder if your plant will end up being a male or a female, obviously you want female plants.

​

​

https://www.amazon.com/dp/B00MVF16JG?aaxitk=OqDYL7cHO0Hl.eJntLB1bQ&pd_rd_i=B00MVF16JG&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=3ff6092e-8451-438b-8278-7e94064b4d42&pf_rd_s=desktop-sx-top-slot&pf_rd_t=301&pf_rd_i=digital+timer+for+growing&hsa_cr_id=5402338260101&sb-ci-n=asinImage&sb-ci-v=https%3A%2F%2Fimages-na.ssl-images-amazon.com%2Fimages%2FI%2F41AN07ub6IL.jpg&sb-ci-a=B00MVF16JG

​

https://www.amazon.com/Yescom-Scrubber-Hydroponic-Control-Ventilation/dp/B00BI5BIC0

https://www.amazon.com/COOCANKE-Flexible-Insulated-Ventilation-Resistance/dp/B06Y45YY5M/ref=sr_1_1_sspa?ie=UTF8&qid=1542130261&sr=8-1-spons&keywords=foil+duct+tube&psc=1

https://www.amazon.com/Yield-Lab-Horticulture-Dimmable-Digital/dp/B00YB4YZNO/ref=sr_1_1_sspa?ie=UTF8&qid=1542130298&sr=8-1-spons&keywords=400w+digital+ballast&psc=1

https://www.amazon.com/Eye-Hortilux-HX66620-400-Watt-EyeHortilux/dp/B00598GSVS/ref=sr_1_5?ie=UTF8&qid=1542130342&sr=8-5&keywords=400w+hps+bulb

https://www.amazon.com/Hortilux-Daylight-Halide-Ballast-Compatible/dp/B00WV8XPBK/ref=sr_1_1?ie=UTF8&qid=1542130397&sr=8-1&keywords=400w+mh+hortilux+bulb

https://www.amazon.com/Hongville-Hydroponic-Cooled-Reflector-System/dp/B077QRGS8S/ref=sr_1_2?ie=UTF8&qid=1542130510&sr=8-2&keywords=air+cooled+enclosed+reflector+hood+for+mh+and+hps

https://www.amazon.com/Apollo-Horticulture-Adjustable-Improved-Internal/dp/B0098R0600/ref=pd_rhf_se_s_cp_0_2?_encoding=UTF8&pd_rd_i=B0098R0600&pd_rd_r=42bfbd0f-3428-487a-a101-99fd4a212a84&pd_rd_w=VUoI9&pd_rd_wg=Loy0k&psc=1&refRID=0X37K56JC417SB7KVZ2Z

u/tech1337 · 2 pointsr/microgrowery

My LED has the same connections and I ended up not using the connectors it came with at all and got 4 of these: https://www.amazon.com/dp/B0098R0600/ref=cm_sw_r_cp_apa_56PPybPHJ6F4D
Connected them from the tent top bars and directly to the hooks on the lights. Can basically raise it right up to about 1-2 inches from the ceiling.

u/user865865 · 1 pointr/microgrowery

This is still a work in progress

Details:

Essential shoping list (to me)

-[6" fan and carbon filter]
(https://www.amazon.com/gp/product/B008NYF8S4/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1) works great, no smell, plenty of airflow, relatively loud at 100%, virtually silent when turned down to below 30% with some sound absorbing foam around the intake and fan. 4" would have worked for my small setup. I'm pushing through the filter which is outside my grow area with no problems. Don't forget some ducting and real duct tape. Clamps aren't really needed at these speeds and pressures if you have good tape, but they won't hurt.

-[Speed controller for fan.] (https://www.amazon.com/gp/product/B006NGI2RS/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1) This was definitely overkill, I just didn't trust cheaper voltage regulators, plus I can and have used it for other things. Pretty well made, works great.

-[pH meter.] (https://www.amazon.com/gp/product/B00CMFVXMA/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1) I didn't want to cheap out on this since pH is so important. Meter works great. Only note is you probably want to get some extra storage solution, it only comes with a little, and after a few months you'll run out.

-Light was a Viparspectra 300 (130 actual watts). Worked well, had good growth. I added more light later but for my small space that would have probably given me decent yields.

-[This timer for lights] (https://www.amazon.com/gp/product/B01MYOD58S/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) was super easy to program and hasn't failed. It has a bright blue LED indicating if the timer is sending power to the lights which is nice, but I had to tape over it because it was so bright. Also, the timer gets a little warm which makes me a little uneasy since I only have ~250 watts going through it.

-General Hydroponics FloraGrow, FloraMicro, FloraBloom, CaliMagic. I also got Fox Farms Big Bloom part way through flower but don't have any way to know its actual benefits so it's not an essential.

-Coco for growing medium. Most people add perlite, I didn't.

-7 gal smart pot

-Plastic storage container with a kitchen cooling rack to sit the pot into and onto and allow drainage without making a mess. Cooling rack allows for 1/2" of water to accumulate before the pot is sitting in it.

-[adjustable hangers for lights.] (https://www.amazon.com/gp/product/B0098R0600/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1) Work great, easy to use



Set up and process

  • In a closet that's 1.8' x 1.8' x 6'

  • Temperatures between 72 F and 80 F. When I measure temp at the bottom of my canopy it's consistently about 5 degrees F below the temp at the top near my fan outlet. I have to use A/C in the room to keep it from moving up to 80 or a bit higher.

  • Humidity between 40% and 60%

  • Coco with about 30% peat moss which included time release nutrients. I didn't want the added nutes and tried running water through it for a few hours to clear it out, but I highly doubt that did anything. I wish I had waited a few days to ship pure peat moss so I could know exactly what nutrients were going into the plant. I picked peat moss because I wanted my pot to hold more water. I'm not sure if this was a good thing or not.

  • 7 gallon smart pot, only ~5.5 gal full though. I'm glad I went with the bigger pot since my plant is so tall and top heavy now. I have read that if you want to go bigger for the pot it's better to go deeper than wider because of the root structure, but I don't know.

  • I sprouted the seed using the paper towel method. Took a few days. Next time I'll probably use the water in a shot glass method.

  • I put the sprouted seed right into the 7 gal smart pot which probably wasn't a great idea. I also watered the entire pot for the first couple weeks which probably was bad. I should have started in a small container and transplant, or at least only water a small area around the seedling at first.

  • I put a bag seed in the same pot and sprouted it because I was dumb and bored. It sprouted and actually got to about 2.5 weeks old before I pulled the trigger and dug it up and transplanted it into it's own 5 gal smart pot. It wasn't happy for a few days because I know I damaged the roots in order to try to avoid the roots of the main plant. I let it grow in the new pot until about 4 weeks then I ran out of room in my closet and trashed the entire plant. Terrible idea all around.

  • Viparspectra 300 initially, then around day 50 of veg I added ~100 watts of CFL. At 40 days after the 12/12 flip I added a galaxy hydro 300 and took out the CFLs (we'll see if that was a good idea...)

  • Veg for 60 days after sprouting. Good idea if you have the vertical space and time. Veg took a long time because I waited too long and the first time I topped I took off like 3 or 4 sets of growth tips, it was like a whole mini plant. I don't know if waiting so long helped the plant develop more roots and a bigger stem which facilitated faster growing or if it was just wasted time. I'm going top it earlier next time though.

  • I topped it twice to get kind of a manifold. The height and size of the colas were not dependent on where it's branch started which makes me doubt the need of a symmetrical manifold, which this was not.

  • Defoliated a little around the 12/12 flip, a lot during about 20-30 days after flipping which left the plant with virtually no fan leaves with stems longer than 1". This was all great, next time I'll probably defoliate earlier.

  • I had to go out of town for 10 days just after the 12/12 flip. I raised up the lights, but not enough and one cola grew into a CFL and killed the top. I cut the top off and now the lower flowers are growing a bit bigger and taller than their partners on other colas, just no top. Also, I only got an automatic watering system set up the night before I left and it didn't water as much as I wanted, plus the pH drifted a lot while I was gone. I started with the pH low to try to mitigate it rising, which I expected. I was expecting the plant to really be struggling, but she looked great actually.











u/GrowMender · 1 pointr/microgrowery

Veg week 2 of clones obtained from my local medical collective. First nutrient feeding at half strength (3tsp/gallon of Fox Farm Big Bloom). LST started on all plants with the GDP starting 2 days later then the others. Did some minimal pruning after the LST settled to get things out of the dirt and clean out some leaves that weren't getting any light. Growth seemed to slow a bit for a few days, might have shocked them a bit from being rough with them, but they are doing great now. Thinking of extending my veg an extra week to compensate, will wait and see if that will even be necessary.

Noticed some small bite marks taken out of a leaf, so I decided not to take any chances and got some AzaMax and gave the girls a good shower at about 0.4% concentration. I will be following that up with a few more applications over the next couple weeks. I'm debating if I want to do a soil drench as well. I also got a gnat sticks that already caught one of the bastards.

Temps with lights on have remained stable around 79F and the RH about 40%. Lights off with fan at 20% temps get to 67F at the lowest and 50% RH at the highest. Also have some new goodies coming from Amazon in the next few days to improve my setup like an Oakton pH2 and rope hangers with metal internal gears instead of those cheapo plastic ones that came with my lights.

 

    Strains

Blue Dream - DJ Short x Santa Cruz Haze. 80% Sativa / 20% Indica. 7-8 week flower cycle

Boy Scout Cookies - Girl Scout Cookies Thin Mint x Pre-98 Bubba Kush. 60% Indica / 40% Sativa. 8 week flower cycle.

Darth Vader Haze - 4-way Black Haze Black Cross. 100% Sativa. 9-10 week flower cycle.

Grand Daddy Purple - Big Bud x Purple Urkle. Indicia Dominant. 8-9 week flower cycle.

 

 

Veg Week 1 Reddit Post - Album

u/Icouldbeanyone · 1 pointr/HotPeppers

I have mine currently on my laundry room shelf with an LED light. Ha. Nice setup. I don't have any reflective insulation right now since I will be moving mine outside soon. But next year I plan on it. Would you say it's cheaper to do that or just get a tent?

Anyone curious, this the LED and hooks I have:

https://www.amazon.com/gp/product/B01F53LP46

https://www.amazon.com/gp/product/B0098R0600

u/RevolutionarySteak · 1 pointr/HotPeppers

You need these... Adjustable Lighting

u/NikIsAnAssHole · 1 pointr/microgrowery

I have a different LED but maybe this can help.

This is my current grow: http://imgur.com/a/FnEdV (The second picture in the album shows the hook)

and this is the 300 watt light that I have: http://www.amazon.com/ViparSpectra-Reflector-Spectrum-Indoor-Plants/dp/B01B4GQ6MO?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

Our hooks might be different but maybe this will give you an idea on how to hang it

Also these may be the hooks you are looking for: http://www.amazon.com/Apollo-Horticulture-Adjustable-Improved-Internal/dp/B0098R0600/ref=pd_bxgy_86_img_2?ie=UTF8&refRID=05TYKJTTZ9XTFCD7SRCJ