Reddit reviews Attmu 50 PCS Reusable Fastening Cable Ties, Microfiber Cloth 6-Inch Hook and Loop Cord Ties, Black
We found 32 Reddit comments about Attmu 50 PCS Reusable Fastening Cable Ties, Microfiber Cloth 6-Inch Hook and Loop Cord Ties, Black. Here are the top ones, ranked by their Reddit score.
DEFINITELY SUPER VALUABLE - Made from fabric material with hook & loop attachments, these cable straps are both reusable and durable. Each pack includes 50 pieces cable ties.FLEXIBILITY & VERSATILITY - Each wire ties is 6 in length and 0.7 inches in width. Include an eye hole in the tail allowing the tie to be attached to a cable or hung from a hook. Multiple ties can be attached together to form one longer tie.SIMPLE TO USE - Organizing cable hooks couldn't be easier. It is much better than plastic cord organizer ties and you do not need to trim it. Gather them together, wrap the durable cord ties around them tightly. The reusable cable ties opens and closes easily and quickly so you can add or remove cables.MULTI PURPOSE - Cord management can be used to tie up speaker cables, guitar cables, TV cables, microphone mic, computer cables, and much more. Wire management or mask straps for back of head is ideal for keeping all kinds of cable management well organized and tidy in place.RISK FREE GUARANTEED - Quality guarantee, Lifetime warranty for any issues. 5-star customer service. No Question Asked. Best value for money. So just buy wire organizer with confidence now. Satisfaction or your money back, just simple like that. TOTALLY RISK FREE. So why not give it a try ?
Let me just start off by saying, even with just the few hours I've played with it, I LOVE this thing. Thank you valve for making such an awesome piece of hardware. And yes, my unit does have the joystick issue but it's just the feedback that's broken. My joysticks otherwise register without issue.
But anyways onto the good stuff.
What?
A 20m (65ft) cable run from my desk to right under the couch, so that the only hookup is the breakout / trident cable.
Why?
In my place, I ran into the predicament of the only space I had room to do VR was the living room, but given that putting my entire desk in the living room would have been weird aesthetically, I opted for the cable run, to get VR from the PC in the room across the house to my living room.
What parts?
Pretty simple actually, but it did require 2, not exactly cheap cables, and one coupler (prices in US Dollar).
The DP - DP coupler is out of necessity, given that no link box exists with the Index. Yes, it's an expensive solution. In addition to the $999 headset, I've spent another ~$231 on cable runs. But for my situation, it works flawlessly.
If you are thinking you need a solution like that, and any of the cables are unavailable (the DP cable is out of stock as of writing on July 6th), make sure to get fiber if you can for the sake of not losing quality over a copper cable. As for the USB cable, you're looking for an active cable. These typically have external power bricks to supply additional 5V power that your tower cannot do over such a distance. Edit: _However_, I have found that plugging in the additional power causes the computer to have issues recognizing any USB device, so I guess don't do that if you buy the same cable. Other cables may vary.
How is it setup?
I have the cables running along the basebords of the house, from my computer all the way to the living room. They take a right angle, and are gaff-taped down to the floor before running under the couch where they can become a loose coil [pic].
Does it work?
In a word, yes! I will update this comment if I run into reliability issues down the line, but it seems that this system works well enough, and has the added bonus of not hearing the PC fans spinning given the off-ear design of the Index headphones. (Edit: The only pitfall is that sometimes you have to power cycle the headset once or twice to get SteamVR to see it, but that doesn't take long. After that it's smooth sailing!)
Hope this helps anyone that might be needing a similar setup!
(EDIT: Numerous edits for spelling / grammar)
Buy yourself a 100 pack of these for $12.99:
https://www.amazon.com/gp/product/B00O9VKVFK/
If you need to change or adjust anything, it's easy and velcro won't leave marks on your cables like Zip ties can when they are too tight against the cable.
I use a combination of cable drops / cable clips, cable ties, and cable sleeving.
https://www.amazon.com/Attmu-Reusable-Fastening-Microfiber-6-Inch/dp/B00O9VKVFK/ref=sr_1_4?ie=UTF8&qid=1500377433&sr=8-4&keywords=velcro+ties
An example of a cheap one.
Check out /r/digitalminimalism, I play exclusively on PC, so I don't have any games physically lying around.
I've got some velcro straps (like these) that I use to keep all of my cables tidy. Everything behind my monitors is a little messy, but everything is tied together nicely.
Lots of these things. Wrap any cables that go from Point A to Point B (same source, same destination) or partway the same (e.g. power cable and HDMI from monitor). Wrap up any excess in a bundle or buy new cables that don't have as much excess. Where applicable, you can also run cables up a table leg to take them off the floor.
>The basic question I really have is what do I do to effective get the cables to the server rack
Run them directly to the rack, leave a "working loop" of extra cable on them so that you have room to work on them or repunch them.
>once at the rack is there special type of setup I should do?
run everything to a patch panel. I prefer a keystone based system because it supports way more than just ethernet. A 48 port keystone patch panel fits in a 2U space, then you can fill it with everything you will need to keep flex and damage to a minimum from the cables running in. This includes HDMI keystones, RG6 keystones, USB3 keystones, and finally cat6a keystones.
Once you have everything run to the rack, you just need short patch cables for everything then, instead of trying to have to work each cable and risk breaking the ends. For ethernet, then you can get 12in or 6in patch cables for your ethernet runs to a 24 or 48 port rackmount switch. This is what my rack looked like last week, I have since added 4 more ethernet runs(from one spot). I have a shelf in there for the modem and Samknows whitebox(no, that is not my router). My PFsense router is just below the server you do see. All the runs from my house come to the rack, and it is all neatly bundled up in back of the rack, and has enough slack in the lines that I can take the patch panel out and work on it should I need to move things around or add more runs. Don't staple your runs down hard, and bundle everything together in the back with velcro cable ties so that should you need to undo anything, you can. Don't use zip ties for that, it makes it a giant PITA later.
Sure thing:
https://smile.amazon.com/gp/product/B018K8UGKM/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
https://smile.amazon.com/gp/product/B06ZZBRC63/ref=oh_aui_detailpage_o06_s02?ie=UTF8&psc=1
https://smile.amazon.com/gp/product/B00O9VKVFK/ref=oh_aui_detailpage_o04_s06?ie=UTF8&psc=1
For the cable concealment; if you are just going to use it for the single sensor cable maybe don't get those wide flat one; get the ones that are more like a square pipe, much smaller profile.
get yourself some VR Covers
https://www.amazon.com/gp/product/B0779VGT9W
---
a USB extension cable
https://www.amazon.com/gp/product/B00C7SA21U/
---
an HDMI extension cable (you only need one, but you can't beat the deal)
https://www.amazon.com/gp/product/B00JJ517VI/
---
a pack of velcro ties for the cables
https://www.amazon.com/gp/product/B00O9VKVFK/
---
bluetooth 4.0 adapter if you don't have one (or don't have a good one) and plug into a USB 2.0 port if possible. put it on the end of any USB extension cable will help ensure a direct line of sight to you from the adapter.
https://www.amazon.com/gp/product/B009ZIILLI/
---
and finally, if your USB ports fail the WMR test, get this card
https://www.amazon.com/gp/product/B011LZY20G/
Twist ties work, but they look a bit sloppy.
The zip ties are okay, but they're permanent, and kind of suck if you want to move things around later.
Velcro ties are alright. But I find they're usually too long, and end up wrapping them around and around and around, which makes the ties look bulky, and unkempt.
https://www.amazon.com/gp/product/B00O9VKVFK/
If you have a big bunch of cables all going the same way, you can use one of these: https://www.amazon.com/gp/product/B004M8SSW8
I used one of those for my V-drum set. You know, with each drum head and cymbal having its own chord running around the frame to the drum unit, it looked much, much nicer when they were all bundled and covered together.
The nice thing about those big cable sleeves is that they're wide enough to run a cable through doubled over without pinching anything. You know, if the cable is too long, just loop it back around to the other end and back again through the tube until the length is right where you need it.
Aside from that, and if you have cables that need to be out in the open (like mic cables), just try to coil the excess neatly under the mic stand so it doesn't look quite so messy. And coil them loosely around the stand so they don't stand out or wave around so much.
Paint : 45 Dollars
https://www.amazon.com/Jolie-Paint-Accessories-Quart-32oz-Gentlemens/dp/B07KFL722B/ref=sr_1_1?keywords=blue+wall+paint&qid=1572963787&sr=8-1
Dual monitor Arm : 35 Dollars
https://www.amazon.com/VIVO-Monitor-Adjustable-Screens-STAND-V002/dp/B009S750LA/ref=sr_1_9?keywords=monitor+arm&qid=1572963822&sr=8-9
Drill a hole in your desk : 0 Dollar
Cable cover : 15 Dollars
https://www.amazon.com/D-Line-Raceway-1D3015W-Electrical-Paintable/dp/B077YD9DG6/ref=sr_1_3?keywords=cable+cover&qid=1572965300&sr=8-3
Cable straps : 8 Dollars
https://www.amazon.com/Attmu-Reusable-Fastening-Microfiber-6-Inch/dp/B00O9VKVFK/ref=sr_1_3?keywords=cable+straps&qid=1572965368&sr=8-3
Cable sleeve : 9 Dollars
https://www.amazon.com/Alex-Tech-10ft-Protector-Sleeving/dp/B07FW3GTXB/ref=sr_1_2_sspa?keywords=cable+sleeve&qid=1572965405&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzSzhQR1pSSU40Rks4JmVuY3J5cHRlZElkPUEwNjgyMDQ5MkpQU1lMMlhMV0g1RiZlbmNyeXB0ZWRBZElkPUEwODEyODg1Mkw4UEE5T1Q2SkNDRCZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
​
Double sided tape : 6 Dollars
https://www.amazon.com/ReLuien-Adhesive-Reusable-Washable-Anti-Slip/dp/B07Y1QWZ5V/ref=sr_1_1_sspa?crid=1OOIXED1G83R8&keywords=double+sided+tape&qid=1572965456&sprefix=double+%2Caps%2C267&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyTkQ1SklLSzBYV1BSJmVuY3J5cHRlZElkPUEwNjM1NjgzMVpPMEZKTjhSUFpNTSZlbmNyeXB0ZWRBZElkPUEwNjU0NTA0MkNKTVNEMzZGWFhSQyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
Total cost : 118 Dollars
You're right i'm waaaaaay off my estimated price, it's about half the price i thought it would be.
I'm sorry dude I just gave my opinion on how to easily improve the aesthetic of your setup but you clearly don't really care about it, then again why post on this sub reddit then ?
Yeah. Just like these. Attmu 50 PCS Reusable Fastening Cable Ties, Microfiber Cloth 6-Inch Hook and Loop Cord Ties, Black https://www.amazon.com/dp/B00O9VKVFK/ref=cm_sw_r_cp_api_i_APZ2Db22TMV6G
I know this is a bit late but maybe you haven't worked on your cable management yet. Zip ties do the trick but can be a pain in the ass when moving things around. They have to be cut for cables to be replaces. Velcro straps like these will keep the cables in place while being reusable and easy to remove.
Since you are in/going to college it is safe to assume your gear will be moved around at least once a year. You do not want to have to cut and redo zip ties each time.
I used these: https://www.amazon.com/gp/product/B000FPAI3Y/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 for my attic cat6 runs and they worked out great. They were also good for holding the coax. The cables can split off from these to their respective headers without any fuss.
Use velcro straps to tie bundles together, never zip ties.
if it's a configuration i'm keeping for more than a year, cheap zip ties. if it's temporary, i have a set of velcro straps. if you wanna go fancy you'll want some wall mounts and things instead, if i remember i'll pop back and throw some more amazon links up.
These to hold cables to back of desk
These to bunch cables together
Neater than cable ties and you don't have to cut them open if you need to add another cable.
My advice is using some Velcro cable ties to hold cables together and then route them that way. Command Hooks are also good like ghostrunnersaid1 said.
https://www.amazon.com/gp/product/B00O9VKVFK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Dude! that was the most challenging part! fucking speaker and subwoofer cables are thick as fuck and long! i shorten them to the optimal length first using these velcro straps below. Then just clip them to the back of the desk with the zip ties shown in the second link. I really like those zip ties because you can squeeze about 4-5 cables in them. Considering i have like 5 or 6 cables running through them while only using the adhesive id say they are of pretty good quality.
https://www.amazon.com/gp/product/B00O9VKVFK/ref=ppx_yo_dt_b_asin_title_o04_s03?ie=UTF8&psc=1
​
https://www.amazon.com/gp/product/B075Y9J42T/ref=ppx_yo_dt_b_asin_title_o04_s02?ie=UTF8&psc=1
Oh my god, I am so sorry!
I was sure that I replied and was waiting for an answer.. since it's been a couple of days I kinda had a second look!
Seems like I never send my message.. derp derp!
---
Well I am personally not a big fan of large monitors, especially not for the 'low' 1080p resolution.
However.. I figured you two would both sit a bit further back when playing on the PS4s, so that you could both look at each other screens?
When you sit far enough back, the big monitor will look great. When you sit at a normal or close enough distance, it might not look that great because of the pixel size being to big.
This video hopefully makes you understand what I mean with this!
----
Yes, I don't believe that the smaller monitor in the middle will be smart.
As for cable management, the longer cables certainly will be helpful. You can also consider to get something like this to get the bunch of cables tidy together. I personally use velcro straps to bunch the big bundle of cables together.
---
The SSD should have no problem with running lots of things at the same time. I am not entirely sure how the Elgato card works exactly. I have no experience with capture cards, so.. yeah.
An SSD can do up to 34 'commands' at the same time. Now I am not entirely sure what counts as a command. Which is where it gets a bit blurry for me.
However, I am fairly sure that the SSD won't be the bottleneck. At most it will be the RAM / memory. But, test it out for yourself first and if you've got issues. We can diagnose them together and find the solution.
Will you only record '1 screen' at the time? I don't understand.. I thought that you would record both PS4s at the same time and then later combine those 2 recordings into 1 video with the magic of video editing? That you upload to YouTube..
Not sure here what the exact plan is, sorry! :)
I use these if you're interested.
Why do the cables need to be attached to the pegboard? Maybe just use some Velcro ties to keep all the cables bundled together?
No, like cut a bunch of pairs of slots that looks like equal signs (=) laterally along the back. Then you can use velcro ties like these: http://www.amazon.com/Attmu-Microfiber-6-Inch-Reusable-Fastening/dp/B00O9VKVFK/ to manage your external cables from all the devices I listed above. Cut them like every 6" or so.
I used a lot of velcro strips and spiral wrap. I'd reccomend these over zip ties so when you upgrade cables or get new components you can reuse your straps. I still need to get one of those cable boxes to put my surge protector into though. If you end up getting a desk with an open back then these help out a lot too. It helps that I have a half backboard to help hide things.
I think I'd still prefer these, for cables, since they're just always on the cable. Just about every camera cable or BNC I have has one of these on it. You can wind it and wrap your cable nicely, or when you plug the cable into your camera you have a convenient tie to tidy up the camera with.
https://www.amazon.com/VELCRO-Brand-ONE-WRAP-Management-Multi-color/dp/B00T2JQ0ZE/ref=pd_sbs_201_3?_encoding=UTF8&pd_rd_i=B00144CABS&pd_rd_r=78W4R4ST5S50NQD2XN0F&pd_rd_w=V9o9C&pd_rd_wg=96TF0&refRID=78W4R4ST5S50NQD2XN0F&th=1
EDIT: These would be good to replace bongo ties with since bongos are breaking constantly.
EDIT2: Amazon has a really good deal on some too.
https://www.amazon.com/Attmu-Reusable-Fastening-Microfiber-6-Inch/dp/B00O9VKVFK/ref=sr_1_4?ie=UTF8&qid=1498509092&sr=8-4&keywords=hook+and+loop+cable+ties
Wrap them "over-under" and use cable ties similar to these. Other than that, store them neatly and try not to walk on them
First, as others have said, get cables that are as close to the correct length as possible. If not, try to bundle like cables together so you have one big bundle area.
Then, get yourself a pack of adhesive backed cable tie mounts and a pack of velcro ties:
https://www.amazon.com/Self-Adhesive-Cable-Management-Zip-Tie-Package/dp/B073RSB4GR/
https://www.amazon.com/Attmu-Reusable-Fastening-Microfiber-6-Inch/dp/B00O9VKVFK/
I use those in combination to route cables along edges, under shelves, etc. If you have several cables that need to make the same route (like from your TV to your receiver), try to bundle them all together when possible (not power with signal for instance).
If you do have to cross signal cables (especially analog audio cables) with power cables, try to make the cross as close to 90 degrees as possible to minimize electrical interference.
What about the velcro type? Or just zip tie?
https://www.amazon.com/Rustark-Adjustable-Self-Adhesive-Straps-management/dp/B071RGCJLT
https://www.amazon.com/Attmu-Reusable-Fastening-Microfiber-6-Inch/dp/B00O9VKVFK
You can get some relatively cheap Velcro cable ties off amazon. I use these: https://www.amazon.com/Attmu-Microfiber-6-Inch-Reusable-Fastening/dp/B00O9VKVFK/ref=sr_1_4?ie=UTF8&qid=1475244613&sr=8-4&keywords=velcro+cable+ties
It looks good for your first try but these links will help you do better:
https://www.amazon.com/Channel-Desk-Cable-Organizer-SimpleCord/dp/B06XZPYP7Y?ref_=Oct_RAsinC_Ajax_11042051_0&pf_rd_r=1N24GCVAEKH8VXVCV1MH&pf_rd_p=aa2c769d-eec9-5298-93e3-59e57ff9c396&pf_rd_s=merchandised-search-10&pf_rd_t=101&pf_rd_i=11042051&pf_rd_m=ATVPDKIKX0DER
https://www.amazon.com/Attmu-Reusable-Fastening-Microfiber-6-Inch/dp/B00O9VKVFK?ref_=Oct_RAsinC_Ajax_11042051_1&pf_rd_r=1N24GCVAEKH8VXVCV1MH&pf_rd_p=aa2c769d-eec9-5298-93e3-59e57ff9c396&pf_rd_s=merchandised-search-10&pf_rd_t=101&pf_rd_i=11042051&pf_rd_m=ATVPDKIKX0DER
Strive for excellence in all you do, always.
They are probably sized from whatever malnourished rodents roam the alleys near the chinese factory where they are made.
If you're remotely competent with a needle and thread you can easily make your own. I did it with some velcro wire ties and paracord sewn together. I think the trick it to make it so they don't feel swaddled by it, which will make them react like that.