Reddit reviews AW 26"x1.75" Rear Wheel 48V 1000W Electric Bicycle Motor Kit E-Bike Cycling Hub Conversion Dual Mode Controller
We found 6 Reddit comments about AW 26"x1.75" Rear Wheel 48V 1000W Electric Bicycle Motor Kit E-Bike Cycling Hub Conversion Dual Mode Controller. Here are the top ones, ranked by their Reddit score.
1000W 48V 26" Electric Bicycle Rear Hub Conversion Kit, fit for 5 5/16" rear dropout spacing, with a speed of 31 mile/h (50 km/h), make your bicycle an electric power moped, brushless hub motor for noiseless running, to fully enjoy the pleasure of riding.Dual Mode Controller - Motor works under Hall effect and non-Hall effect, extend life for electric bicycle (If the components break down, controller will switch into non-hall effect mode, the motor will still be working ).Durable Frame - Aluminum alloy frame for durability and stability.Convenient to Use - Thumb throttle with battery monitor makes speed control as a breeze.Hand brakes shut off the motor automatically to save energy and improve safety. Environmental Protection - Powered by battery, without carbon dioxide emissions.
Good point, I will add it to the video description. For now, the motor kit is:
https://smile.amazon.com/gp/product/B00YBWAINC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
and the battery:
https://smile.amazon.com/gp/product/B00XP53DH4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
The battery was the most expensive part, it does not need to be that big, but I can get about 20 miles out of one charge.
I went with this battery which was $531USD. I wanted to make my own cell from a bunch of 18650s, but didn’t want to take the time.
The [motor and controller] (https://www.amazon.com/dp/B00YBWAINC?ref=yo_pop_ma_swf) was cheaper at $196USD.
Other than that I upgraded the front fork and brakes, as well as tires to compensate for the extra weight.
As far as waterproofing, the bag it self I water proof. I tested it by filling it with paper towels and putting it in the shower. I wrap a trash bag around it If I leave it anywhere. The wheel itself is self contained and sealed from ingress. I’ve ridden it in snow for many miles. Has no problem.
Edit: fixed links
I got them off of Amazon. The only real issue was that the battery wouldn't fit in the middle due to the curved frame. But it works.
Are you not worried about your battery getting stolen? I drive my bike to school every day and lock it up at the racks with hundreds of other bikes, so I want to make sure that mine is secure and can't be stolen. I'll ask em3ev if they have any secure mounts or something, but if they don't then do you know anyone else who does?
Also, you have convinced me... I am getting a rear wheel hub motor. Now my question is... Is the one I linked in my original post the best kit option for $200-$250? Or is there something much better for a similar price? Preferably a kit with everything I will need or some kind of parts list with links for everything I need.
Also, is there a huge difference between the 48 and 52V batteries? Is it better to go 52V for the hub kit i linked originally? (Or a better similar one if you recommend it.)
And how can I make sure that the kit will fit my bike? I read that most manufactures will say the width of the frame (where the rear tire is) required for their wheel/motor kit. I measured my 2 bikes and ones at 129mm and the other at 136mm.
eBike Conversion Kit
Battery
what else would i need?
Im asking a legit question why downvote ._.
This is the seller/kit I bought, so far no problems had it a couple months
AW 26"x1.75" Rear Wheel 48V 1000W Electric Bicycle Motor Kit E-Bike Cycling Hub Conversion Dual Mode Controller https://www.amazon.com/dp/B00YBWAINC/ref=cm_sw_r_cp_apap_pahn2BWMUa2up