Reddit Reddit reviews bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM

We found 23 Reddit comments about bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Power Water Pumps
Rough Plumbing
Water Pumps, Parts & Accessories
bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM
Circulation pump is non-self-priming pump. Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft1/2" Male thread on the pump. The OD of the brass coupler is 10mm. Comes with a power adapterPower source: DC 12V(POWER ADAPTER INCLUDED), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hoursMax circulating water temperature: 100°C/212°F. It's submersible but can't be immersed in hot water exceeding 50°C/122℉One year warranty: replacement without return
Check price on Amazon

23 Reddit comments about bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM:

u/ta11dave · 5 pointsr/Homebrewing

Those robobrews are super popular. I have a Mash and Boil, and I know a few people who own a Grainfather.

Or you could buy an induction heater and use equipment you already have. There's no wrong answer. Also, I got this pump for cheap and it works great for recirculating the mash or moving wort to a fermenter.

u/montana2NY · 4 pointsr/Homebrewing

Is there any way to tell is this pump is safe to recirculate wort and whirlpool? Temps seem fine, just don't want any issue with the plastic not being food safe

u/anadune · 3 pointsr/Homebrewing

For mash circulation, you don't need much. On my small electric system (Mash and Boil) I use one of these.. That has a 2.1 GPM flow rate.

A step up would be the Anvil Pump at 3 GPM flow rate. It also has some added benefits like in line switch.

A further step up would be the MKII Pump with a 5 GPM max flow. I personally think this is the best performance for price (never having used it, and just reading specs).

u/rathulacht · 3 pointsr/Homebrewing

https://www.amazon.com/bayite-BYT-7A015-Heater-Circulation-Adapter/dp/B01G305PK0?ref_=fsclp_pl_dp_1

I went with this. Saw it mentioned a few times. Seems to be decent.

u/killingtheclock · 3 pointsr/Homebrewing

Congrats! I too got one for my birthday and have put two all two all-grain batches through it in March. It’s super convenient but even with all the reading and YouTubing I did before using there was still a bit of a learning curve.

If you did not get the version with the built in pump, I would highly recommend getting pump recommended on amazon to help with recirculation during mash. I had a pretty difficult time the first time since I had decided not to use it. I noticed the built-in sensor kicking on the heating element on even though I was measuring a correct mash temp. On the second brew day I used the pump and the heating element did not kick on as much.

If you are using the amazon pump, I’d also recommend running it with the valve 50-75% open or to have the tube reach into the mash. I slightly modified my lid by drilling out the hole in the top to fit a 3/8” stainless barbed elbow. This was done to avoid kinking of the silicone tubing and to be able to keep the lid on during mash. The problem I ran into by doing this is the flow from the pump was too high and the splashing cause a foam to build up. The foam easily rose to the top with some bits of grain and husks, and could have easily spilled over the sides of the basket. I noticed this about 30 minutes into the mash and adjusted the valve to lower thr flow. I will likey test adding 6-12” of tubing on the other end of thr elbow so that the tube end is in the mash and not above to cause splashing.

My mashes have been full immersion using a bag and I’m temped to sparge with it to see if I can get more efficiency above 75%.

u/strongestboner · 3 pointsr/Homebrewing

I have one of these and it's great. I bought a pump like this one which did die on me eventually, but it's much easier to clean and replace since it's not inside the system

u/captain_fantastic15 · 2 pointsr/Homebrewing

It's not as strong as the pricier pumps but it does just fine.

I even used one of these on a 5 gallon setup for a while and it was even able to do what I needed:

https://www.amazon.com/gp/product/B01G305PK0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

u/Chromebrew · 2 pointsr/mashandboil

Yeah i found this which looks like a lot of people are using for recirc. https://www.amazon.com/gp/product/B01G305PK0/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 or if i need a real chugger or something that can stand up to some grain mush. I think ill try it and see.

u/wisenuts · 2 pointsr/Homebrewing
u/Frackenbrau · 2 pointsr/Homebrewing

you can build the exact same thing diy for about $70. and im sure you can source cheaper parts. you get 2 brass hose barbs with the pump below as well.

u/Binford2000 · 2 pointsr/Homebrewing

I’ve used this one with good results. It’s not a great transfer pump, but it’s perfect for cooling. I use it in an ice water bath to temp control my spike fermenter.

u/grillz602 · 2 pointsr/Homebrewing

This is what I use. You have to prime this one manually. I Jerry rigged a switch to it for convenience. There are definitely nicer ones out there but it works great for us.

https://www.amazon.com/bayite-BYT-7A015-Heater-Circulation-Adapter/dp/B01G305PK0

u/Thurwell · 2 pointsr/Homebrewing

Several amazon sellers stock them for similar prices, here's one example. I've seen them cheaper without the AC adapter. Plenty of reviews on there.

u/Endymion86 · 1 pointr/Homebrewing

I believe I use the same Solar Pump as you do, chino, albeit possibly with a different power supply (see here).

Any chance you can link me to the controller you use/the wiring diagram you used to attach it?

u/enarik · 1 pointr/Homebrewing

Anyone use one of these? Wondering if it is okay to use for only water or water and sanitizer/oxiclean? I wouldn't pump wort through it, just the sparge water and cleaning solutions.

Thanks!

u/crawtators · 1 pointr/firewater

Sadly...economics appears to have taken hold. This is the EXACT pump i have...but was 7.99 when i bought it...appears now to come with hose barbs, dc plug instead of just wire leads, and hose clamps...which dont justify the increase. https://www.amazon.com/gp/aw/d/B01G305PK0?psc=1

Might be able to find a cheaper one...but bayite is the brand i used

u/blooper98 · 1 pointr/Homebrewing

Sure!

hot water pump pump

800w souse-vide it seems the price went up on this one, maybe shop around for a cheaper 800W unit (I paid $55)

u/kdneverstops · 1 pointr/Homebrewing

Do you find it easy to brew 5 gallon batches in the brewers edge? I was actually looking at getting the brewers edge without the pump and getting a cheaper hot water pump and some tubing and using that to recirculate - something like this

If you or anyone else on the thread has tried this and could say speak about how well that would work I’d love some feedback.

u/EngineeredMadness · 1 pointr/Homebrewing

Also, not exactly related, but if you do decide to upgrade your rig to recirculating, it's not that expensive for a no-name chinese pump: https://www.amazon.com/bayite-BYT-7A015-Heater-Circulation-Adapter/dp/B01G305PK0/ref=sr_1_5?keywords=hot+water+pump&qid=1574359338&sr=8-5


I personally would recirculate hot wort through any cold-side or hot-to-cold side hardware if possible.


Also in re chillers, I put my chiller in to the boil with 15 minutes remaining, and pause the boil clock until it returns to boiling temperatures. Needs time to heat sanitize that as well.

u/humashoon · 1 pointr/Homebrewing

Would you recommend something like this instead?

u/imBobertRobert · 1 pointr/Homebrewing

bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM https://www.amazon.com/dp/B01G305PK0/ref=cm_sw_r_cp_apa_i_fphaCbPTYYWHJ

Not the best but it works fine. Isn't self priming though.

u/jheinikel · 1 pointr/Homebrewing

I got the one in the Amazon link below. HomeBrew Finds found a deal on fittings from Pro Flow Dynamics, and that's where I bought the ball valves and other fittings.

https://www.amazon.com/dp/B01G305PK0?ref=yo_pop_ma_swf