Reddit reviews BBox E12SV Single 12" Vented Carpeted Subwoofer Enclosure

That amp isn't really going to give you the transient response with a passive sub with it's wattage output, especially if running all four outputs.

You'd probably be best off with the BIC. If you have the skills needed, you could possibly build a DIY with a decent/budget bare sub and something like a Rockville RPA9 bridged and using the 150hz crossover.

https://www.amazon.com/Rockville-W12K6D4-V2-Subwoofer-Compliant/dp/B07BMMS1LJ/ref=sr_1_1?ie=UTF8&qid=1536642739&sr=8-1&keywords=rockville%2Bsubwoofer%2Bcea%2Bcompliant%2Bk9&th=1

with this;

https://www.amazon.com/Rockville-RPA9-Channel-Power-Amplifier/dp/B06XDRZD3D/ref=sr_1_1_sspa?ie=UTF8&qid=1536642824&sr=8-1-spons&keywords=rockville+rpa9&psc=1

And this;

https://www.amazon.com/dp/B0013N0UEE/ref=twister_B01MQQB9D9?_encoding=UTF8&th=1

would give you a hell of a lot of bass for around $300.

But that's ultimately up to you.

depends on the 15s, some like a lot of air, most of the ones I've seen(including CompS) want a minimum of 3'. My single 15 has a bit over 4 to itself. Also a box like that is the same as buying or building 2 seperate boxes since they use a single port for each side and not a shared port. Like these look ok for singles. I like the separate boxes because you can move them around and if you need just a little trunk space you can remove one and still keep a little bass. in a previous car I had them like this and loved the convenience, and also miss having at least a little trunk compare to this lol. Also my box and sub weigh over 100lbs which is a PITA to get in and out of the trunk by myself.

I tend to go a bit of overkill on amps because it's better for the sub to be overpowered than it is to be underpowered. It's easy to hear when subs are bottoming out, but not so easy to hear when an amp is clipping. I'd probably stick with the MB Quart amp and if you have self control go with the comps, or save another $100 and go with this fosgate box which is 1Ω final and 1200w would make it very happy. Also 1200w is a lot easier on your car's electrical system than 2000(120A vs 200A). Lots of tough decisions, it depends more on what you're looking for. A pair of the MBQuart dual 4Ω Subs with the quart amp would go well together as well, but between the quarts and Fosgate P3s, I'd choose the P3s and they are about the same price. I'm a little biased, but for $140 each you can't go wrong with these. Here's a vid of my old 15" version of the same sub with a little over 500w going to it. My RE 15(same 600w rating) lived about 3 years with about 500w(MRP-M500 with 590w birth sheet) then went for about 4 months on my M110(1300w+ birth sheet) and didn't die until I intentionally tried to destroy it the day my Fi came. In the $200 each range I'd say Sundown SAs, in the $300 range, I love my Fi.

I have that exact sub but I'm running it off a JL 1000/1d mono block amp. I had it in an enclosed box first and eventually moved to ported box. The ported box makes it much louder. Can't comment much on the amp you have in momd but 1000 watts is more than enough power. It's in my 2011 Mazda 3 with an aftermarket headunit and it sounds great, all that's left is to get rid of the rattles this summer! Just thought I'd share my experience with ya. Hope it helps.

Edit: here's the box I chose for it https://www.amazon.com/dp/B0013N0UEE/ref=cm_sw_r_cp_apa_zaVOAbD953G1C

Item | Price
:--|:--
Alpine Type-R SWR-12D2 Subwoofer | $142
NVX JAD1200.1 Amplifier + Installation Kit | $305
NVX True Spec 1/0 Gauge Big 3 Amp Wiring Kit | $70
BBox E12SV 12-Inch Single Vented Subwoofer Enclosure | $40
Total | $557

That should be a good start. That gets your a basic enclosure (you might be happy with that, you might want to consider building a custom one or having one built), the subwoofer, amplifier, wiring to install the amplifier, and wiring to upgrade your battery and alternator cables.

This one is decent.

• E-12D2 V2
  
• Atrend Ported box
  
• Amp Remember he has $300 budget
  
• Wiring Kit
  
• L.O.C.
  
  Youll have $15 left to hit up a Taco Bell

I got a prefab temporarily for my SA-12 that's tuned to 33Hz, and sounds pretty good to me. Atrend Box Link

Oh duh, it was coming up for me since i was logged in, here ill give you my account info.

Login:
https://www.amazon.com/gp/aw/d/B003ZWBG7Q/ref=yo_ii_img?ie=UTF8&psc=1

Password:
https://www.amazon.com/gp/aw/d/B0013N0UEE/ref=yo_ii_img?ie=UTF8&psc=1

Kidding thats the sub and box respectively. Sorry dude!

https://www.amazon.com/gp/product/B0013N0UEE/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1 this is the box I have. I know it's not best to use prefabs but I don't have the means to build a box currently and anything bigger will not work in my situation in my car right now

anything else I could do to improve?

Alright, I will buy Rockford Fosgate Punch P2. As far as the box goes how does this look? I am not sure how to find the right type for that sub.

http://www.amazon.com/Bbox-E12SV-12-Inch-Subwoofer-Enclosure/dp/B0013N0UEE/ref=pd_sim_e_4?ie=UTF8&refRID=1GZ3QQN113ZA4BAF94XM

So basically my setup will be that box,

Amp: http://www.rockfordfosgate.com/products/details/p3001

Sub : http://www.amazon.com/Rockford-Fosgate-P2D4-12-12-Inch-Subwoofer/dp/B004UFHXIS

Speakers: http://www.crutchfield.com/p_1131665S/Kenwood-KFC-1665S.html?tp=105

Stereo: http://www.amazon.com/Sony-DSXA40UI-Digital-Stereo-Receiver/dp/B00FB45SRU

Any advice to make it better, or if something is wrong is really appreciated. Thanks again for the help!

I can't seem to find the 1.5 cubic feet box. Would this one work?

Also, which would be better: Alpine SWS-12D2 or Alpine SWS-12D4

And what size of amp should I get?

Would this be a good enclosure

I have $300 on Amazon so I could add a couple hundred if needed but now I'm only thinking about 1 sub. I'd say $300-$400 for all of the equipment and then installation is separate.

I'm thinking of Rockford P3 600W for the sub, 12 in. Ported Enclosure as the box, and Zapco Mono Class d for the amp.

Would this work alright or should I get a different amp for only 1 sub? Also, should I get the 2 ohm sub or the 4 ohm sub? Let me know what you think.

The second option is closest to recommended specs

It's a prefab. This one. https://www.amazon.com/E12SV-12-Inch-Single-Subwoofer-Enclosure/dp/B0013N0UEE/ref=sr_1_1?s=car&ie=UTF8&qid=1486184286&sr=1-1&keywords=Atrend+bbox+12. Would you suggest I find someone local to build me a custom box rather than a new amp? I primarily listen to rap. Thank you.

To be honest, that is a horrific setup, avoid at all costs. That amp can and will never do "800w", try 200w max. Also, never pay attention to max ratings, those can be whatever the manufacturer wants, look for an RMS rating. If you think the terminators are bad, those are about 10x worse.

Go with O_HAI_2_U's suggestion, it will be infinitely better with one smaller quality setup, rather than two underperforming 12's. Here's a prefab box that would fit the type-r:
http://www.amazon.com/Atrend-12-Inch-Single-Subwoofer-Enclosure/dp/B0013N0UEE/ref=pd_bxgy_e_img_c

with this box and this amp edit: it would actually be about 50-60 bucks cheaper to go this route and you willl have better quality sound