Reddit Reddit reviews Behringer U-Control UCA222 Ultra-Low Latency 2 In/2 Out USB Audio Interface with Digital Output

We found 98 Reddit comments about Behringer U-Control UCA222 Ultra-Low Latency 2 In/2 Out USB Audio Interface with Digital Output. Here are the top ones, ranked by their Reddit score.

Musical Instruments
Music Recording Equipment
Computer Recording Equipment
Computer Recording Audio Interfaces
Behringer U-Control UCA222 Ultra-Low Latency 2 In/2 Out USB Audio Interface with Digital Output
Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playbackCompact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platformsMassive software bundle includes Audacity audio editor, comprehensive podcasting software and over 150 virtual instruments and effect plug-insWorks with your PC or Mac computer - no setup or drivers requiredStereo Headphone output with dedicated Level control lets you monitor both input and outputRevolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencerBundle includes Audacity audio editor, comprehensive podcasting software and over 150 virtual instruments and effect plug-insWorks with your PC or Mac computerno setup or drivers requiredSoftware is downloaded from manufacturer website.
Check price on Amazon

98 Reddit comments about Behringer U-Control UCA222 Ultra-Low Latency 2 In/2 Out USB Audio Interface with Digital Output:

u/djdementia · 9 pointsr/Android

As a DJ I just died a little bit inside. I sure hope they have a shitty sound system because driving even a halfway decent sound system off a phone is asking for serious trouble.

It will sound like shit, it will be distorted and have a serious lack of bass and high end.

Hope you put that phone in airplane mode, nobody wants to hear your txt message or phone ringing.

Please, I implore you not to do this. At the very least you should have a low end laptop running foobar2000 or something with the auto crossfader and a low end music/dj sound card like this one.

u/mwfisher3 · 7 pointsr/audio

The Behringer UCA-222. It's 30 bucks, acts as a headphone amp as well as a stereo RCA interface with optical out for easy connection to a stereo, mixer, etc. I use mine to plug my laptop into my living room home entertainment system. I never have to worry about a lousy 1/8" to RCA cable breaking or falling out of my computer's headphone jack.

http://www.amazon.com/Behringer-UCA222-U-Control-Ultra-Low-Interface/dp/B0023BYDHK/ref=pd_cp_MI_0

u/junglizer · 5 pointsr/DJs

I use one of these: http://www.amazon.com/gp/aw/d/B0023BYDHK/ref=mp_s_a_1_1?qid=1394292147&sr=8-1

Nothing super special, but it sounds good and gets the job done. Just use it on booth/record out of your mixer.

u/grandzooby · 5 pointsr/audiobooks

I still sometimes buy books on cassette - some older books are only available that way. And somehow it seems more fitting to hear and old-time book with old-timey tape hiss and frequency response.

I picked up a couple old cassette decks from a thrift store and use a decent digitizer (https://www.amazon.com/Behringer-UCA222-BEHRINGER-U-CONTROL/dp/B0023BYDHK) to record them to flac/mp3.

In fact, here's a bash script (I'm a Linux user) that I wrote to record sides of tape to flac:

!/bin/bash


usage()
{
cat << EOF
usage: $0 [Filename Base] [Tape Number] [Tape Side] [optional DURATION (default=60 minutes)]

Record from the ALSA hardare hw:1,0 (USB Audio) to a FLAC file.

examples:
$0 War_and_Peace 1 A (record 45 minutes to 01-A_War_and_Peace.flac)
$0 War_and_Peace 1 B 60 (record 60 minutes to 01-B_War_and_Peace.flac)

EOF
}

if [[ -z $1 ]]
then
usage
exit 1
fi

get command line arguments

TITLE=$1<br />
TAPENUM=$(printf %02d $2)<br />
TAPESIDE=$3<br />


DURATION=$(( 45 60 )) # 45 minutes 60 seconds

if [[ -n $4 ]]
then
DURATION=$(( $4 * 60 ))
fi


OUTFILE=$(printf %s%s-%s.flac $TAPENUM $TAPESIDE $TITLE)


avconv -f alsa -ac 2 -ar 44100 -i hw:1,0 -t $DURATION -y $OUTFILE


Of course, that's hard-coded to my audio setup (hw:1,0 in the last line).

One example of something I could only get on cassette was Asimov's The Complete Robot.

u/TheImmortalLS · 5 pointsr/headphones

I tried using my nexus 5 with a usb-otg cable that allows charging and usb-dac/amp


it's unnecessarily complicated, and a headphone jack is the sane choice, preferably a good one like the lg v10 has.

u/proxpi · 3 pointsr/WeAreTheMusicMakers

Your mic is a good one, your mixer is probably fine... it probably is the sound input on the laptop. Laptop integrated audio is usually pretty shitty to begin with, as it is crammed in close with a bunch of EM-producing circuits, not to mention general cost cutting and the fact that most inputs on laptops aren't meant for anything but a crappy headset-type mic in the first place.

What you need is an external sound card, or, more accurately when talking about music production, an audio interface.

The simplest route to go would be to get something like a Behringer UCA222. It's cheap, but pretty bare-bones. You would simply plug in the RCA output of the mixer into the RCA input, and you should be able to record via that.

For the next level up, there's some better options. One would be the ART USB Dual Pre, which would let you use TWO microphones. Seeing as you don't have two, and it's fairly limited otherwise (it would ignore your mixer completely), I would rather recommend something else...

..such as the Tascan US-100. This is a more complete audio interface, with mic/instrument and stereo in. You could run your SM57 directly into it, to the computer and have the lowest noise possible (any analog connections introduce some level of noise into the signal). You could also connect the RCA output of your mixer to it. The only drawback is that it does not have phantom power, but your mixer can supply that if you ever end up getting a condenser microphone.

All of these options should sound QUITE a bit better than running your mixer directly into your computer.

You didn't mention what software you use, but almost anything should work with any of these.

Hope that helped a bit!

u/Kerb3r0s · 3 pointsr/pocketoperators

$30 and it works with phone, tablet, and PC. Just need a cable or adapter to convert stereo 3.5mm to RCA.

https://www.amazon.com/dp/B0023BYDHK/ref=cm_sw_r_cp_api_i_kUrTCbYY19BCS

u/Zeeall · 3 pointsr/audiophile

Thats assuming he got optical output on his laptop


I'd go with a Behringer UCA222 instead.

https://www.amazon.com/Behringer-UCA222-BEHRINGER-U-CONTROL/dp/B0023BYDHK

u/neuromonkey · 3 pointsr/raspberry_pi

I've used a Behringer UCA222 with a Pi 1 and a Pi 3. It isn't audiophile quality, but it does sound pretty good. (I think I paid $22.)

http://wiki.linuxaudio.org/wiki/raspberrypi#supported_usb_devices

u/zachsilvey · 3 pointsr/audiophile
u/dloburns · 3 pointsr/vinyl

It'd be better to get a USB audio adapter* and just a normal dj turntable like a Technics SL-1200 (assuming you want to queue up certain parts).

Some things to know:

  • Direct drive vs. belt drive
  • Using Audacity to record
  • You might need a preamp (you could stack them to distort the sound too)
  • An adjustable counter-weight and replicable needle are probably the two most important parts that separate a cheap TT from a Quality TT

    *rca jacks would be the best, and if you have a desktop you could get a sound card installed that has them too. Other wise you could use the line-in plug which might require and adaptor.
u/explosivo563 · 3 pointsr/audio

That is a bummer. I would try reconnecting everything to your motherboard and looking for anything messed up. You never know what might wiggle out.


If sound is your only issue, you can get a soundcard, or more ideally an external USB DAC. (To lessen the chances of any internal interference you may be getting from other pc components.)


This was my first dac. There are others but this is a good start for only $30: https://www.amazon.com/Behringer-UCA222-BEHRINGER-U-CONTROL/dp/B0023BYDHK/ref=sr_1_sc_1?s=musical-instruments&amp;amp;ie=UTF8&amp;amp;qid=1483496476&amp;amp;sr=1-1-spell&amp;amp;keywords=behringer+uica

It was actually this one, but I believe they are basically the same, aside from the red color.

u/GothamCountySheriff · 3 pointsr/vinyl

You can get a USB audio interface. The better the turntable and interface the better the end product. But for a turntable the level of your LP60, this Behringer unit should do the job fine:

https://www.amazon.com/Behringer-UCA222-BEHRINGER-U-CONTROL/dp/B0023BYDHK

u/sfish · 2 pointsr/VaporwaveMiniDiscs

Yes, there are at least three options (maybe more I am not familiar with). If you purchase an external audio interface with a USB -&gt; Toslink digital path (like the Behringer U-Control UCA222), and an appropriate cable, you can transfer all the digital audio content you want in real time from your computer to your MZ-N505. Then you'd need to place your own track marks and name the tracks manually. With NetMD software running on a PC, you can transfer WAV files directly to an MD at LP quality and naming files is much easier. There is more modern software for Windows, Mac, and Linux that can afford SP transfers and which also automates file naming, but you'll need to be comfortable with a command line interface. Setting up any of this is a little outside my ability to support directly, but there are many tutorials online to be found if you look/ask around.

u/MHMoose · 2 pointsr/piano

Here is how I can hear both my computer sound and Yamaha P71 sound through my headphones.

  1. I bought this device on Amazon.

  2. I bought this cable on Amazon.

  3. For the cable, the stereo end goes into your keyboard, the two RCA plugs go into the device above.

  4. The device above connects to your computer to a USB port.

  5. Your headphones plug into the device. You can then hear your keyboard and computer at the same time, like if you wanted to play along to a backing track on YouTube or something.

    Hopefully that is helpful. Took me a while to figure out but it works really well.
u/seezed · 2 pointsr/GlobalOffensive

Unless you need the extra ports and utility, higher price doesn't increase audio quality only functionality.

My best purchase in recent time was a BEHRINGER U-CONTROL UCA222.

u/BangsNaughtyBits · 2 pointsr/podcasts

Regarding FaceTime on the Mac, there was a bug in FaceTime Audio regarding mic selection where it would only use the internal or 1/8" jack for input. That was fixed recently. Unfortunately, I'm on the dev betas and I don't recall if it's fixed in the latest 10.10.2 release or in the beta releases. This was never a problem with FaceTime Video, however.

Also, there is a desktop application that will be leaving beta soon called PodClear. It will use a paid service but it will let you get double headed recordings regardless of the method you use to communicate and it lets you control the record button and settings to you don't have to trust the guest to know what they are doing. It will be pretty darn cool as it lets you have effectively unlimited guests using Hangouts or Skype and get pristine locally recorded tracks sent to you.

http://www.podclear.com

You can also of course just wire you Mac or IOS device into your mixer. The best hardware I've found for this that always works with the Apple TRRS single headphone port is a Tascam iXZ.

http://www.amazon.com/TASCAM-iXZ-Instrument-input-iPhone/dp/B005NZ05J8/

I've had luck with some RCA video to TRRS cables as well but occasional noise occurred. A Behringer UCA222 or UCA202 depending on your color choice is also well worth the cost if you are mix-minusing with a mixer.

http://www.amazon.com/Behringer-UCA222-BEHRINGER-U-CONTROL/dp/B0023BYDHK/

!

u/[deleted] · 2 pointsr/buildapc

I was using this for a while with my old laptop. I use [this]9http://www.amazon.com/Behringer-UCA222-U-Control-Ultra-Low-Interface/dp/B0023BYDHK/ref=wl_it_dp_o_pC_nS_nC?ie=UTF8&amp;colid=3NHZ36WKJNZP8&amp;coliid=I2ULLJB7WUOYK3) to hook my laptop to the system in my garage.

not sure if either will work for your purposes.

u/moonlightmelody · 2 pointsr/audioengineering

holy shit, thank you so much for the explanation and the link - that helped me out a TON in even understanding what i'm getting into.... so basically, i have everything from 5-7 (i got beyerdynamics dt 770 pros a while ago), what i need is the others and an audio interface ... question: is it problematic to buy a cheap audio interface for my purposes (like, say, https://www.amazon.com/Behringer-U-Control-Ultra-Low-Interface-Software/dp/B0023BYDHK ) ?

and, since i can get a new beyerdynamics m99 for 300€ (im from europe), would you say thats an alternative of the same quality to the shure sm7b (which would cost 80 euroes more)? i'm trying to get the entire package for 500 euroes. my current setup is an usb microphone, so i'll need to get all the gear.

u/PoopyButt_Childish · 2 pointsr/Beatmatch

I used THIS usb audio interface for recording and it worked well enough for what you want to do. You record into Audacity by setting the input to USB. A separate mic input is not needed. I used it on an older MacBook Pro.

u/ProgHog231 · 2 pointsr/Bass

I suspect you're not going to have much luck trying to plug straight into the mic input for your sound card.

You really need some sort of audio interface. Depending on how strict your budget is, maybe something like this Behringer. I have a slightly different model of this and it works OK. If you need something even cheaper, then one of the generic 1/4-inch to USB (often marketed as 'Rocksmith' cables), could do (about USD 10), but you could run into quality and compatibility issues, in which case your money might be wasted.

Once you have audio, your speakers will probably sound like crud, but at least you'll have some sound. If you have some decent headphones, you could listen through them. Either way, keep the volume reasonable.

u/Cool-Beaner · 2 pointsr/raspberry_pi

https://www.amazon.com/Behringer-U-Control-Ultra-Low-Interface-Software/dp/B0023BYDHK/ref=sr_1_1

The little Behringer UAC222 is the same price as the Griffin iMic that you linked to. Probably uses the same chip so it should just work. The main difference is the the Griffin uses a 3.5mm jacks where are the Behringer uses RCA jacks. Get which one suits your needs.

The size is wrong on Amazon. it's 3 x 2 x 0.8 inches. Also, if you need a turntable input, look at the Behringer UFO202.

u/the_cody · 2 pointsr/synthesizers

To be able to hear it on your computer, you will need an audio interface, or, an audio input on your built-in sound. If your computer is a desktop and you have external speakers that are driven by audio out (and not usb) and are powered (aren't passive), you could just get a Stereo to Left+Right cable to plug the Microkorg into. If the speakers are passive (don't plug into power), you will need and amp to boost the signal from line level out to speaker level (or it will be very quiet).

To be able to control FL Studio / have FL Studio control the Microkorg, you will need a midi interface.

Something like the PreSonus Audiobox USB is a great 2 In x 2 Out Audio and 1 In x 1 Out Midi interface ($100 at Sweetwater. You can get cheaper midi and audio interfaces, but I wouldn't trust them all that much ... personal opinion ... though for starting out, it might not be a bad idea to test the waters as it were.

u/pink__sky · 2 pointsr/pocketoperators
u/Runninback405 · 2 pointsr/Beatmatch

Wow you are so helpful, thank you.

So I think I've found a way that will work that involves less pieces. I cross posted this question in r/iphone here. The comments led me to this potential set up:

From my XDJ-RX's dual 1/4 TRS output, I'm going to have this male TS to male RCA cable going into the RCA input ports on the Behringer UCA202 (or UCA222), and then I will have that plug into the Apple Camera Connection Kit via USB, and then that goes into my phone. And THAT should get me a stereo signal.

Does that sound right to you? I'm like 95% sure that plugging two TS plugs into two TRS jacks (on the XDJ-RX) will only reduce the connection to unbalanced, but keep it stereo.

But it's good to know that if this setup doesn't work, the one that you suggested will. Finally this is all starting to make sense!

u/marssaxman · 2 pointsr/Beatmatch

I played on a Mixtrack Pro for years - bought it as a cheap experiment, figuring I'd upgrade when it wore out, and then it just... didn't wear out. I ended up playing quite a lot of gigs with it. It was really nice to have a cheap indestructible controller I could throw in a bag and take out to a warehouse or some forest or whatever.

Only thing the non-Pro Mixtrack is missing is a sound card, which would let you have a separate headphone cue output from the master output. But for $40, what have you got to lose? Try it out. You'll probably have a good time. If you like it, buy a sound card, or buy a better controller. I think it's a good plan.

u/sharkamino · 2 pointsr/BudgetAudiophile

Behringer U-Control UCA222 USB DAC https://www.amazon.com/dp/B0023BYDHK/ $30, may be all that you may need.

u/txby432 · 2 pointsr/Beatmatch

Depends in the controller. I got the Numark Mixtrack Pro as my first controller. It has a mix input and I use it with virtual DJ, which has a built in recording option. If you don't have that option, Behringer has a great external sound card that will give you RCA inputs in your computer to use a free program like audacity to record. Won't be studio, but will work.

u/evilmonk99 · 2 pointsr/Reaper

Depends on your price range. I started with a Behringer UCA222 then upgraded via a Steinberg UR-22 which broke after a while. Now I'm using a Behringer UMC404HD which has lasted well so far. You could go for the smaller version, which is surprisingly cheap, if you don't plan on recording many instruments at the same time.

People say good things about the Focusrite Scarlett series as well. I've never used one but they are a little bit more pricey than the Behringers so I always end up with one of them instead.

u/spinal2k · 2 pointsr/NintendoSwitch

I use this to avoid using the 3.5mm jack on the switch.

https://www.amazon.co.uk/Behringer-UCA222-U-Control-Ultra-Low-Interface/dp/B0023BYDHK/ref=sr_1_8?crid=2FPMNL3YYLOI4&amp;amp;keywords=beringer+usb+audio&amp;amp;qid=1569309803&amp;amp;s=gateway&amp;amp;sprefix=beringher+usb%2Caps%2C157&amp;amp;sr=8-8

I have absolutely no problems with the "sleep mode" hiss that you mention (no need to disconnect) and it's better sound quality IMO.

My setup isn't that different from yours, I have a mixer and a focusrite saffire 6 USB. You combine everything at the focusrite level, I do it at the mixer level (in my case, there's a reason for this that is unrelated to the switch). Some sound sources I don't want them to go through the DAC, so they go straight to the mixer.

u/women_are_pretty · 2 pointsr/BudgetAudiophile

OK. I have had very good luck getting audio in and headphone out with this Behringer USB DAC

As for record players, This Project is what I have and I love it. They have this one that has USB out, but I've never tried it so I can't tell you if it's OK.

Neither solution will give you speakers and an amp, but both together will give you good sound to your headphones.

u/i_dont_know · 2 pointsr/computertechs

You're asking this question in the wrong sub, but what you want is a low-latency audio interface. The Behringer UCA222 is an inexpensive USB option. I haven't used that interface (I use an Apogee Duet), but the specifications look good for the price and the reviews are mostly positive.

That $30 audio interface should work much better than an old sound card.

u/podheadrod · 2 pointsr/podcasts

I use that mixer for my podcast. Bought it off Craigslist for 40 bucks about four years ago and it's still going strong. It gets the job done and I really have no need to upgrade. But like others have said:

  • Don't record with an onboard soundcard. You'll pick up a ton of static (I learned the hard way).

  • If you can save up for a USB mixer it's probably a better choice.

    But like I said, that's the mixer I use, granted I didn't pay $90 for it. The way I'm able to record to my PC is with this Behringer USB audio interface. Sure it's a lot more cables, but it was a much cheaper alternative back when I was starting up and didn't have the funds for a USB mixer. I would check your local craigslist or eBay for some used Behringer or Mackie mixers, both are built to last and there are some great deals to be had. Spend the extra money you save on better mics and you'll be on your way. If you're the paranoid type you can always invest in a digital recorder for back up, since someone else mentioned there's always a risk the program or PC will crash. Hasn't happened to me yet, but you never know. Be sure to let us know when your first episode is up!
u/_shadow_banned_ · 2 pointsr/BudgetAudiophile

So what's the application? Is this at home? How do you want to control it? You can get a Raspberry Pi and install PiCore There are DAC that rival anything available. You can get the HiFiBerry DAC/AMP and plug in a USB drive. Play all your music off that. Control it with your phone.

The Audiosource is a nice amp, and the ELAC are great. I am not a huge fan of the Fiio, it's nice, but it's not very robust. I have had better luck with those cheap Behringer UCA 222

u/YouShouldBeProud · 2 pointsr/headphones

My motherboard has ALC892 and upgrading to a DAC has a significant improvement in my system, even the cheapest DACs sound better. But depending on your mobo implementation of that chip, and your PSU etc, YMMV. Sound card is still in your case so any EMI you may hear with your mobo sound will likely still be there, better to buy a external DAC like this one:

www.amazon.com/Behringer-UCA222-BEHRINGER-U-CONTROL/dp/B0023BYDHK

u/bassist_human · 2 pointsr/Bass

I'm not familiar with Massive, but I can help with getting your bass signal to your pc.

As a first option, there are 1/4" guitar USB devices sold expressly for this purpose. Behringer makes the cheapest one I know of: Behringer UCG-102. Ran across it while looking for a general purpose USB audio interface, but I didn't buy it because of the reviews complaining about the drivers. There's a $30 Mac cable I've seen used, too, but I don't know if anyone has PC or linux drivers for it. There are a lot of others, most of which start around $100 that I've seen. The Native Instruments one runs several hundred $$, I think.

I have a cheap jerry-rigged method that suits my needs, though. If you have a desktop pc, a DI pedal, or a better soundcard than usual, you might be able to do something like this more easily, but this is what I threw together one day after picking up the ground-isolator and USB audio interface for other purposes:

1/4"-to-3.5mm adapter into the headphone-out of amp, then a 3.5mm-to-RCA converter on top of that. Ground-loop-isolator (mine has RCA inputs and outputs, hence the converters) from that into the USB audio interface. I'm using the Behringer UCA-222. The interface connects to the PC via USB, or course.

Two things worth noting: 1) you'll probably want to install "ASIO4ALL" drivers to decrease latency times on this or similar USB audio interfaces and 2) you may not need a ground loop isolator, depending on your hardware. I'm using a laptop in this setup, and if it's plugged in then there's some interference. Easy way to check: while the pc's plugged in, if you can output your pc's audio to the Line In on your amp without hearing static, you probably don't need a ground loop isolator.

Hope that helps.

u/bornrevolution · 2 pointsr/DJs

well, i figured this out, i think, if you're curious to know.

it seems OBS will recognize any audio device that your computer can, however it will only listen to channels 1 and 2 of whatever mixer you're using. you can sort of hardware-hack around this, by routing an rca-to-rca cable from the record out to the channel 1's in, thus making your audio heard within OBS, however you lose out on an entire channel just for this purpose.

i decided to get an extremely cheap usb/rca device, which will do the trick a lot more efficiently and will save me the channel i need.

this was the only video that actually shed some light on my situation.

u/findingejk · 2 pointsr/Beatmatch

Also consider:

Behringer U-Control UCA222 Ultra-Low Latency 2 In/2 Out USB Audio Interface with Digital Output
https://www.amazon.com/dp/B0023BYDHK/ref=cm_sw_r_sms_apa_i_AJrkDbQRRQ7VX

As an option. I have it and it works great to give an rca interface to the PC, you can then "listen to" this USB input on any of your connected output devices whether that be 5.1 aux cables or USB headset or literally any of your output devices.

u/polymonic · 2 pointsr/WeAreTheMusicMakers

I did this with a Tascam 424 by getting 2 Behringer U-Control UCA-222's ($60 for a pair) and creating an Aggregate Audio Device on my Mac.

This way each of the 4 outputs was sent to their own dedicated track in Logic Pro X and I could mix it as I'd like in Logic.

u/jared_and_fizz · 1 pointr/vinyl

I bought this really basic audio interface to record from my turntable to my mac. I hook it up directly to my turntable, open GarageBand and hit record. It isn't the nicest interface ever but from what my ears can tell the quality of the recordings is good.

u/PapaSteel · 1 pointr/podcasting

The Beringer 1000B - I HOPE this will work with the adapter.

u/crapinet · 1 pointr/audio

Honestly, there's your answer - maybe even using an extender if there's not enough room. This makes sense because the front audio ports go through a cable internally before going into your mobo - and there's just a lot of interference inside any case. I have always experienced front audio issues - I can't even stand using headphones from there.

One idea: if you have $30 this cheap USB audio interface might work for you (if it works with your mic) (idk what the model differences are here) http://www.amazon.com/gp/aw/d/B0023BYDHK/ref=mp_s_a_1_3?qid=1419455961&amp;amp;sr=8-3&amp;amp;pi=AC_SY200_QL40# or http://www.amazon.com/gp/aw/d/B000KW2YEI/ref=mp_s_a_1_4?qid=1419455961&amp;amp;sr=8-4&amp;amp;pi=AC_SX110_SY165_QL70#

Edit: you'll need an adapter, like this http://www.amazon.com/gp/aw/d/B000I97G0U/ref=mp_s_a_1_2?qid=1419456342&amp;amp;sr=8-2&amp;amp;pi=AC_SX200_QL40

u/yellowtape5 · 1 pointr/audiophile

Ya that would be great. I think my best bet is to just buy another one of these, http://www.amazon.com/gp/product/B0023BYDHK/ref=oh_aui_detailpage_o06_s00?ie=UTF8&amp;amp;psc=1, I already have one that connects my laptop to my mixer and there are no problems there. I was just hoping there was a way to fix this without having to buy any more equipment.

u/sigmmakappa · 1 pointr/applehelp

In that case an external USB audio adapter would help.
I have this for recording audio independently from my internal sound card:
http://www.amazon.com/gp/product/B0023BYDHK
It's got input and output capabilities, gets recognized immediately by the OS and and any app, and works quite right.
You only need to make sure it's connected before opening the app.

u/meltphaced · 1 pointr/DJs

Use this to plug your mixer to your computer. Then use Audacity selecting this as your input source. It's quite straight fwd.

https://www.amazon.co.uk/gp/product/B0023BYDHK/ref=oh_aui_detailpage_o04_s00?ie=UTF8&amp;amp;psc=1

u/Mad_Economist · 1 pointr/CabaloftheBuildsmiths

I feel that you are seriously underrating modern integrated audio, and overrating soundcards. In many cases, integrated actually boasts better specs than add-in boards in areas like output impedance. Unless your integrated audio is incapable of sufficiently powering your cans, it's unlikely that a soundcard will be a marked improvement.

The [Behringer UCA202] (http://www.amazon.com/Behringer-UCA202-Audio-Interface/dp/B000KW2YEI)/[222] (http://www.amazon.com/Behringer-UCA222-BEHRINGER-U-CONTROL/dp/B0023BYDHK/ref=sr_1_1?s=musical-instruments&amp;amp;ie=UTF8&amp;amp;qid=1427766273&amp;amp;sr=1-1&amp;amp;keywords=uca222) is a [moderately competent DAC] (http://nwavguy.blogspot.com/2011/10/uca202-dac-take-2.html), though with a 50Ω output impedance and a mediocre integrated amp, you need a dedicated amp to pair with it. However, OP has Sennheiser HD201s. He will not see major returns from a new audio chain unless he seriously upgrades his headphones first.

Edit: Additionally, don't buy into "golden ears" concepts too much. Analytic listening takes some time to perfect, but most of the things that "only audiophiles can hear" exist only in the minds of the so-called golden-eared people proclaiming their abilities. See: audible returns from $1000 DACs and amps.

u/BusinessManJackson · 1 pointr/FL_Studio

Would something like this work? So it wouldn't make skype mute itself (and all other programs) when I open FL Studio?

u/zoink43 · 1 pointr/Beatmatch

So I thought of two possibilities to do the recording.

  1. Set the soundcard to line input and convert the tunrtable's phono signal to line with a phono amp, e.g. something like this. This way you can use traktor's built in recorder.

  2. Get a USB Line input and record with another program, e.g. with Audacity.
u/TheDynamicHamza21 · 1 pointr/audacity

&gt;my laptop doesn't have a microphone-in 3,5mm input

There's your problem your laptop may not be capable of line in recording except with dedicated audio interface like UCA222.

u/o0turdburglar0o · 1 pointr/Reaper

Just to elaborate a bit:

I'd really suggest getting a dedicated audio interface, as that's the proper way to solve this issue.

Here are 3 options, in order of cost:

  • Some people use ASIO4ALL which will let you use your normal soundcard in low latency. In my experience (haven't used it in over a decade) it doesn't work very well, but it may do the trick for you.
  • A cheap interface like the Behringer UCA222 may fix the issue for you. It's $30 and is very basic. I can't attest to its quality, as i haven't personally used it.
  • If you can afford $110, the Scarlett Solo is a great little interface, and it also will give you a couple of inputs for mics/instruments/etc. I can personally vouch for the Scarlett line.
u/FoX_KiLLa · 1 pointr/WeAreTheMusicMakers

I was thinking something like this might work? Behringer UCA222. I guess I would need those adapter cables as well.

u/snowtx · 1 pointr/BudgetAudiophile

If you can increase your budget a bit, buy two of these JBL LSR305 for $198 shipped on sale. Excellent sound quality and really don't need a subwoofer to get decent bass.
http://www.markertek.com/product/jbl-lsr305/jbl-lsr305-5-inch-two-way-powered-studio-monitor-each
They are powered so you don't need to buy a receiver of amp. Just need cables, cheapest route but you might have some noise issues from the computer's digital-to-analog converter (DAC): https://www.amazon.com/Hosa-CMP159-Stereo-Breakout-10-Feet/dp/B005HGM1D6/ref=pd_bxgy_MI_img_y If that happens, an audio interface likely would solve it and probably improve sound quality over your computer's DAC (plus you would have easy to access volume control), e.g. https://www.amazon.com/Behringer-UCA222-BEHRINGER-U-CONTROL/dp/B0023BYDHK

u/jj69rr · 1 pointr/audiophile

Best possible? Or just better? Best possible has no limits. Better can start with a $30 upgrade like the Behringer UCA222

u/double-happiness · 1 pointr/audioengineering

I need to buy a USB audio interface to use for ripping vinyl and tapes to my laptop. I'll either be using the output from my mixer or the tape out from my amp, I'm not sure which yet. Can anyone give me any 'clinchers', pros and cons or whatever, between these three USB audio interfaces?

u/DQ11 · 1 pointr/synthesizers

I have a Behringer UCA 222. It's about as basic as you can get.

L/R RCA Audio In/Out

http://www.amazon.com/Behringer-UCA222-BEHRINGER-U-CONTROL/dp/B0023BYDHK.

I'm currently looking to upgrade to a Presonus though so I can actually use MIDI with it.

u/themusicalduck · 1 pointr/hackintosh

http://www.amazon.com/dp/B0023BYDHK

I have this and it works very well.

u/Dr_Mohawk · 1 pointr/audioengineering

I am in high school and I am looking to put together a crappy little demo. I want to start recording my voice for singing and miking an amp for guitar. I want to keep the price as low a possible. Here is what I am interested in..

Audio Interface

Shure 58

Cable

I really don't want to spend $150 - $200 on a interface. Also, is the cable right? Should it be XLR to stereo RCA?

u/Techsavyy · 1 pointr/pcmasterrace

I haven't personally used that one but I have this one :https://www.amazon.com/Behringer-UCA222-BEHRINGER-U-CONTROL/dp/B0023BYDHK

No complaints, fairly cheap as well.

u/g-spot_adept · 1 pointr/ZReviews

O2 amp + behringer usb DAC is the cheapest combo that will sound great

O2 amp + ODAC if you have more money

u/archbox · 1 pointr/audiophile

I'm looking for the cheapest way to connect my RCA speakers into my PC while still getting good quality. I know I can get the 3.5mm to RCA and just plug it into my desktop PC's single line out Jack (the integrated sound card doesn't have 5.1... Just three 3.5mm ports).

I was looking at getting a soundcard but it seems like a better idea would be to get USB DAC with a R and L RCA for my Swan M10 speakers.

I am considering:

Signstek USB DAC (http://www.amazon.com/Signstek-Coaxial-Converter-Decoder-Analogue/dp/B00FEDHHKE/ref=sr_1_11?s=industrial&amp;amp;ie=UTF8&amp;amp;qid=1436249483&amp;amp;sr=1-11&amp;amp;keywords=usb+digital+audio+converter&amp;amp;pebp=1436249517158&amp;amp;perid=1T2Q01GX3ASW2DERY0PV) and the Behringer UCA222 (http://www.amazon.com/Behringer-UCA222-BEHRINGER-U-CONTROL/dp/B0023BYDHK/ref=sr_1_1?s=musical-instruments&amp;amp;ie=UTF8&amp;amp;qid=1436603887&amp;amp;sr=1-1&amp;amp;keywords=behringer+uca&amp;amp;pebp=1436604042407&amp;amp;perid=1MZWF1NBM3SWS08ZG4HM) I 

u/DZCreeper · 1 pointr/buildapc

Does your interface have a USB input? That would mean it is already serving the function of DAC. If not you can grab a $30 Behringer UCA222 which works well enough.

u/tetonpassboarder · 1 pointr/podcasting
u/JusticeTheReed · 1 pointr/diyaudio

Sorry you're getting downvoted - you're just asking for help, but people are assholes.

I agree with the other commenter that a cheap sound card is by far the best option. You should be able to get something for as little as like $20, especially if you buy used.

Here's probably the cheapest new option I'd recommend.

Otherwise, why do you need to send audio between them? There is audio &amp; video capture software for both windows and mac and phones that can record your computer's own audio. This would be way simpler and probably free.

u/CrexisNX · 1 pointr/gaming

Your friend can still find a composite style audio video connection for the Xbox 360. If she hooks it up to one of these –Behringer U-Control Uca222 Ultra-Low Latency 2 In/2 Out Usb Audio Interface With Digital Output And Massive Software Bundle – and then to the USB port of a laptop, she can use a program like Audacity to record the sound output of the Xbox when playing back the tracks she wants to. There are a lot of guides on the web about how to use audacity to encode an MP3 from there.

Edit: doing it this way would allow her to record the actual dual channel digital audio directly from the source, making it much higher quality than holding a microphone/phone to the speakers.

u/Wraith8888 · 1 pointr/vinyl

Crosley T 150 isn't a bad place to start. It doesn't have USB but you can buy a Beringer interface for cheap when you get around to wanting to digitize stuff. You may find these things cheaper elsewhere. These links are just to show you the items.

u/SurfaceDockGuy · 1 pointr/Surface

Focusrite is great. I have the 18i20

But a budget option if you only need two channels is this:
https://www.amazon.com/Behringer-U-Control-Ultra-Low-Interface-Software/dp/B0023BYDHK

u/Zappawhappa · 1 pointr/recording

what exactly does the interface do compared to inputting the guitar directly into the soundcard? the interface takes the guitar signal and converts it digitally before going into the pc? Why so expensive some of them though I seen this cheap one which seems similar to one 10x the price https://www.amazon.co.uk/Behringer-UCA222-U-Control-Ultra-Low-Interface/dp/B0023BYDHK/ref=sr_1_9?ie=UTF8&amp;qid=1543545287&amp;sr=8-9&amp;keywords=guitar+usb+interface

u/onyxdragonvgking · 1 pointr/SP404

Hey! I'm a newbie myself [same deal, but got my SX about 3 months ago and haven't gotten much time to practice :/]

- You'll certainly need RCA cables, to connect input sources like turntables or other equipment into the ext source for sampling, and / or outputting your SP404SX audio to speakers other than the headphones output.

&amp;#x200B;

- if you want to sample from your phone / computer, you can:

  1. get a RCA to 3.5 mm adapter cable https://www.monoprice.com/product?p_id=30902 - this site has great, trustworthy cables

  2. get a RCA input interface (and eventually RCA cables of course) https://www.amazon.com/Behringer-UCA222-BEHRINGER-U-CONTROL/dp/B0023BYDHK

    &amp;#x200B;

    - The sound does come out of the box...via RCA output, or headphone output :P There is no onboard speaker, if that's what you mean :)

    &amp;#x200B;

    - You need separate RCA cables if you want to connect an input source and output source at the same time; up to you. If you're fine with only using the headphones to listen to / make beats, then you don't need one for output. :)

    Same with input: if you're ok with sampling from your phone / whatever else by playing the audio into the mic input [which might be great depending on what you're into] instead of external source, or if you're only importing samples from an SD card, you don't need one for input.

    Either way, they're cheap and good to have around if you ever want to connect speakers for output, sample from RCA output equipment, etc. :)

    &amp;#x200B;

    - Not sure where you're located, but Micro Center has SD cards for super cheap

    https://www.microcenter.com/search/search_results.aspx?Ntk=all&amp;sortby=match&amp;N=4294966791+4294821590

    &amp;#x200B;

    Bonus: Aside from the manual, there's a ton of resources listed on the right of the sub; along with some that helped me:

    spvidz; great guy who continually puts out tutorials, tips and tricks for the SX [and other equipment]

    https://www.youtube.com/channel/UCP2CqbhL7InlgfIRQv9m7_Q

    and Chops Magazine SP404SX tutorial playlist

    https://www.youtube.com/watch?v=J-Q8srdrka4&amp;list=PLsOHfXKpEjzT5jl2U1kaPxCkCuovw3g3h

    &amp;#x200B;

    Hope this helps!
u/IronCrown · 1 pointr/BudgetAudiophile

I think I'll try it. I also found there two, but I'd have to buy new cables for them.

u/macetheface · 1 pointr/drums

Great thanks for the info. For recording, what's an example of an audio interface? I'm wondering if I could just use the USB adapter and output all sound to a laptop/ software.

u/PascLeRasc · 1 pointr/headphones

You might just need an isolated DAC for your PC. This one is "good enough" for most and it's portable-ish if you want to bring it to work or something. If you want a little better, I'd recommand this interface (or the 2i2, get it used/refurb if you can find it). It'll let you plug in a guitar if you play or want to play and record, or if you're into gaming you could get a cheap XLR microphone and have way better voice quality than anyone else on the server. Lots of options.

u/ThePoopant · 1 pointr/audio

Everyone saying midi is meaning using software to create the sounds and just using the clavinova as an input device and not actually making any sound. Midi carries no audio it's only sending signals. If you wanted to take the audio created from your clavinova into your PC for recording you would need to find out what outputs it has. It most likely has either a stereo or mono TRS port or RCA connectors. From there you would just need an interface for the audio to go into your PC. If it's got TRS outputs you could plug in one into there and get an adapter that would plug into your standard audio jack on a computer (this is a cheap alternative to using a audio interface however it may not be the best sounding). If it's only got RCA you could pick up one of these I use it for my set up and it works great.

u/Ghee_Buttersnaps_ · 1 pointr/audioengineering

This is the audio interface I was referring to.

And that's kinda what the picture in the manual suggested. The only recording setup recommendation was RCA cables to an interface like the one I have/linked to.

Any ideas on how to get this working with my computer, sans interface?

u/camwow13 · 1 pointr/movies

Sure!

So I'll assume you guys have the absolute bare bones in equipment and work from there. Since these are voice recordings from the 60s\70s there won't be much fidelity to capture so you should be pretty safe.

I've only done this with a Windows machine but I think there are similar settings on Mac. If not this will at least give you an idea of what to Google.

You'll need to get the audio from the tape deck to the computer. Technically you should use a line input. If you have a desktop computer it might be the blue connector. If you have a laptop you can use one of these things or something similar. If you're a cheapskate like my Dad you can just use the microphone input (if you have a headphone/microphone combo jack you'll need this doo-dad).

Note that the Mic input is "hot" in the sense that it's very sensitive to the noise coming into it and a line level input from a tape deck with clip out all the audio. You'll need to dial the mic sensitivity down. In Windows 10 right click the audio icon&gt;Sounds&gt;Recording&gt;Select your default mic input&gt;Properties&gt;Listen&gt;✔Listen to this device (to monitor)&gt;Levels&gt;Adjust levels. How to adjust levels should be apparent soon.

If you're using a Walkman type player you can connect with a simple auxillary cable (double sided male headphone jack). If you have a big tape deck just hook it into the Mic or Line jack with one of these. Toss a tape in there and let it play. Check to see if you can hear it with the "Listen to this device" checked. Adjust the levels to where it sounds normalish. You'll fine tune it next.

Install Audacity. In the top bar you'll see a mic input drop down, select your line in or mic input. Click the audio meter for the mic next to check your input levels. Advice on this varies but in general keep the green bar bouncing on the low end between the -12 and -6 during normal audio levels on the tape. This gives some wiggle room when people on the tape get antsy. You can adjust that with the OS input levels and fine tune it with the Audacity mic levels.

Restart your tape, hit record, and play it through.

When exporting I like to use FLAC for lossless audio but if you're looking for something more practical just use a high quality setting for MP3. FLAC is built in but you'll have to install the MP3 exporter (which I just linked wiki instructions for). You can also use WAV but its a lot bigger and doesn't support tags. When you export you'll have options to tag the artist data. I like to input as much data as I have about the tape in these fields. It will display in any compatible media player and it keeps things generally more organized.

If you don't want to bother with any of that you could try visiting local music shops and recording studios and I'm sure there's someone there that you could pay to have it done. I've never tried that though.

Hope that sets you down the right path. Preserving old audio like that of our parents is important. I have a box of old "love tapes" my Dad mailed to my Mom when they were dating. I should digitize them... but it's really weird to hear. Maybe I'll send them out.

u/JOlJJVMfW · 1 pointr/Twitch

u could get a usb audio device to play lets say voice chat through. so that's an extra line. can buy 3 of those but the quality isnt amazing just for voice and music id say

thats what i use i have a list specs on my bot's channel but all it is is a usb audio device

Behringer U-Control Uca222 Ultra-Low Latency 2 In/2 Out Usb Audio Interface With Digital Output And Massive Software Bundle https://www.amazon.com/dp/B0023BYDHK/ref=cm_sw_r_cp_api_hYqzzbK0G2M8C

there are others. i also use another usb for listening to the mixr itself by listening to the devoce through the usb

u/listentochrispodcast · 1 pointr/podcasting

I like this explanation of options.
It seems like the first option is slightly more elegant but I wonder does that Behringer UCA202 need to be powered? Also I see there is a newer version which seems to be identical. the UCA222.

https://www.amazon.com/Behringer-UCA222-BEHRINGER-U-CONTROL/dp/B0023BYDHK

u/Jacobskole12 · 1 pointr/MPClife

thank you for the help man ;) do you think this will work: https://www.amazon.co.uk/Behringer-UCA222-U-Control-Ultra-Low-Interface/dp/B0023BYDHK

u/Safroon710 · 1 pointr/Beatmatch

Behringer U-Control UCA222... https://www.amazon.com/dp/B0023BYDHK?ref=ppx_pop_mob_ap_share


I just bought this. It works very well just be sure you have the cords you need. RCA to RCA ddj&gt;DAC&gt;speaker

The DAC out will need rca to what ever your speaker requires.

RCA&gt;3.5mm what ever it is

u/grevenilvec75 · 1 pointr/BudgetAudiophile

I have a small bit of experience with this. I have both a Behringer UCA222 connected to my pc for shits and giggles, and a Shure x2u that my SM57 mic is connected to.

The behringer is a solid device for the price, but it's not going to win any awards outside of a "budget" contest, and the x2u is more of a specialty device made specificaly for a microphone, but it does have a headphone jack that allows you to listen to audio from your PC, so it technically qualifies.

Long story short, I personally wouldn't hesitate to use a USB interface instead of a DAC. But I'm somewhat of a macguyver who really likes when one device can do multiple jobs (mic input and audio output at the same time? yes please!).

That said, I really like Schiit devices too (I own an sys) and you can't go wrong with it either.

u/pizzaman113 · 1 pointr/audio

Ok so a bit confused here. You have CDJs and you want to record what is coming out of them correct? you can do this with just your mixer and an audio interface such as this. Or are you trying to use your CDJs with the software, meaning your music is stored on the computer and your trying to use the CDJs and mixer as your control surface?

u/masterofstuff124 · 1 pointr/abletonlive
u/SantoroMT · 1 pointr/DJs

aside from what /u/britty1983 mentioned, if you want to use the output to an external recorder you could pick up an RCA piggyback to run the output into the speakers and piggyback into something like this

u/killmesara · 1 pointr/Logic_Studio

My power rail on my modular is supposed to have an integrated power filter. But I also installed noise suppressing socket in the case to help eliminate AC line noise from the 110 outlet.
I didn't have noise issues with my previous interface which was this guy

The one I have is this hunk o junk Im usuing temporarily.

I only get the high pitched squeal using this interface via USB. No noise when I run my synths into a mixer, PA or analogue recorders.

u/PirateKingOfIreland · 1 pointr/audio

Perfect.

Your headset uses a plug called TRRS, and your splitter splits that to a pair of TRS plugs.

Buy a Behringer UCA222 and a pair of TRS female to RCA Male adapters (specific model for this adapter doesn't matter, this one is just an example).

Steps:

  1. Plug the headset into the splitter as you're doing now

  2. Plug each side of the split cable into one of those adapters.

  3. Plug the adapted microphone side for the headset into the Behringer's Input channel

  4. Plug the adapted speaker side for the headset into the Behringer's Output channel.

  5. Plug the Behringer UCA222 into your computer (it's USB).

  6. Select it as the default input and output device in Windows.

  7. Set your computer's output level to about 75.

  8. Flick the "Monitor" switch on the Behringer UCA222 to On

  9. Use the volume knob on the Behringer to control headset speaker volume.

  10. Adjust the headset microphone gain using Windows' built-in system. You probably won't have to.

  11. When you want to switch to your speakers instead of your headset, use the Windows sound output control panel to switch your output device. Some software may allow you to select a specific device within it, if you want some things going through speakers while others go through your headset.
u/jgibson02 · 1 pointr/CarAV

The UCA222 only has 2 RCA outputs, and the wiring harness for the car has 4 sets of +/- wires for the speakers. I don't have an amp and am not sure if I need one. If I do need one, that pretty much kills it because my car's wiring harness doesn't have a remote turn on wire for the amp.

u/deadkactus · 1 pointr/audioengineering

i have this little amp with some small book shelf speakers and i love it http://www.amazon.com/Upgraded-LP-2020A-Lepai-Amplifier-Shipping/dp/B00FOK6974/ref=sr_1_5?s=musical-instruments&amp;amp;ie=UTF8&amp;amp;qid=1405229745&amp;amp;sr=1-5&amp;amp;keywords=hifi+mini+amp best 20 bucks spent

and these are the small speakers i use to check mixes out in the living room and sometimes just to enjoy some tunes while cooking (condo, living room or kitchen? the lines blur),.they sound fair for the price
http://www.amazon.com/PLMR24-3-5-Inch-Weather-Speaker-System/dp/B001CXXDBM/ref=pd_sim_MI_3?ie=UTF8&amp;amp;refRID=12SZHXF0FR2DA98B7T3Y with a separate amp you can always upgrade the speakers.

these are 3 way but a little less cheap http://www.amazon.com/Dual-LU43PW-Indoor-Outdoor-Speakers/dp/B000A5S926/ref=pd_cp_e_0.

when it comes to near fields, to do actual pro work, for a good price, i went with the blue sky exo2.1 , they are full range with the sub, shielded because they are made for the desk, no bass reflex port on the satellites (the sound from the port holes comes out delayed, bad for mixing, unless very well engineered) and the woofer has separate control so you can turn it down because small rooms amp up the low end, all for for 500 bills (the price to value ratio is great, no doubt). if you find them used, the price is even lower. blue sky products are legit and you will have no need to buy monitors for a long, long time. i would save up, like 20 bucks every other day or so and in no time, you will have a legit, full range monitoring system that will gets even better with a little room treatment. all i know is "buy cheap, buy twice" http://www.sweetwater.com/store/detail/eXo2/

next is the equator d5 with dsp. i have not heard these live yet, but sometimes they are on sale direct from equator and they seem great on paper for the price http://www.equatoraudio.com/D5-Coaxial-Studio-Monitors-p/d5.htm but since i have not heard them like i have with my blue skies, i cant be anecdotal. here is a sound on sound review for a pro break down of their performance http://www.soundonsound.com/sos/dec12/articles/equator-d5.htm

and if you want to save money and have a truly great output to feed any monitor for 50 bucks, try the hifime diy sabre dac http://www.amazon.com/HiFiMeDIY-Digital-Analog-Converter-Optical/dp/B00AOH5JTQ/ref=sr_1_fkmr0_1?ie=UTF8&amp;amp;qid=1405237210&amp;amp;sr=8-1-fkmr0&amp;amp;keywords=hifi+diy+dac, i using it now in between digital to analog converter upgrades and if you plug right out of the usb port on the computer (no hubs) it sounds great, like really even compared to dac's in several price ranges above. read the first review, http://www.amazon.com/review/RIXL3WSR02G6/ref=cm_cr_rdp_perm?ie=UTF8&amp;amp;ASIN=B00AOH5JTQ you will get a little smarter about digital analog converters. its one of the best reviews on amazon i have ever had the pleasure to read, and check out the users other reviews, he does a few headphone units comparing their price to performance ratio and will blow you away with his technical know how and fluid writing style. like the one on the Beyerdynamic DT-990-Pro: http://www.amazon.com/review/R2BUTFCE473Q9V/ref=cm_cr_rdp_perm

i dont know much about recording gear, as im mostly a listener, i use an adc/dac from behringer and it sounds decent for 30 bucks and no drivers http://www.amazon.com/Behringer-UCA222-U-Control-Ultra-Low-Downloadable/dp/B0023BYDHK/ref=sr_1_2?s=musical-instruments&amp;amp;ie=UTF8&amp;amp;qid=1405238098&amp;amp;sr=1-2&amp;amp;keywords=behringer+dac
sounds better than a tascam i had, that was overbuilt and 3-4 times the price. i choose this not be cheap, my focus is just on listening, it was what i wanted.

sorry about the long post but i dont half ass my posts. its like playing those brain training apps for me but not boring and actually productive/practical. take care. my hands are injured, so im not bothering with punctuation and formatting!

u/Jounas · 1 pointr/piano

If it's a digital piano then I very much recommend a capture device to record. They are not only much cheaper but superior in quality when recording digital instruments. I have this it's really cheap and easy to use. Decent quality, but nothing too fancy. Just be sure to buy cables that fit your piano's line out sockets. The device itself uses RCA sockets

u/wishingyoukarma · 1 pointr/Guitar

hi, so i asked a question already and got the answer of using a USB audio interface to record my electric guitar.

what I have found [looking for cheap]: https://www.amazon.com/Behringer-UCA222-BEHRINGER-U-CONTROL/dp/B0023BYDHK/ref=sr_1_13?ie=UTF8&amp;amp;qid=1484275708&amp;amp;sr=8-13&amp;amp;keywords=usb+audio+interface

is this suffice enough to record my plays using garageband and my laptop (ios)? is there something else i can buy within $50 USD? and do i need anything else to record? a cable to connect or something

u/Magixren · 0 pointsr/audiophile

http://www.mackie.com/home/showimage.html?u=/products/mr5/photos/MR5_Back%20Panel.jpg
The easiest would probably be using a USB DAC with RCA out (Like this) and RCA cables, one to each monitor?

u/SalaciousB · 0 pointsr/Beatmatch

DDJ SX2..?

No such thing as an SD2...?

That I know of...

&gt; Where is your audio routed after Serato?

SX 2 has an XLR Master out and an RCA Master out. If the XLR is routed to your speakers then take the RCA out and plug it into an audio interface(that's the cheapest you are likely to find) and use Audacity or another DAW to record the incoming audio stream.

Either of the recorders linked above would also work though in the same setup but they are more expensive and will require a USB drive or SD to record onto. You'd simply take an the RCA out and run it into the recorders Line In with and RCA to 3.5mm cable.

If you already use the RCA out you'd likely need a DI to convert that XLR output to Line Level.

Or you could purchase the music you want to play and thereby support the artists who produce it.