Reddit reviews Best Choice Products Hitch Mounted Anti-Tilt Motorcycle and Dirt Bike Carrier Rack, 500lb Capacity
We found 6 Reddit comments about Best Choice Products Hitch Mounted Anti-Tilt Motorcycle and Dirt Bike Carrier Rack, 500lb Capacity. Here are the top ones, ranked by their Reddit score.
LOADING RAMP: Self-storing ramp installs on either side for easy loading and unloadingANTI-TILT LOCKING DEVICE: Prevents wobbling and rattling, and has tie-down sites on both sides of the trackHEAVY-DUTY STEEL: Durable hitch mounted design built to hold up to 500 poundsVERSATILE: Fits a 2-inch square receiver for use with Class II, III, IV, or V hitch receiversOVERALL DIMENSIONS: 76"(L) x 7"(W)
Unless I'm missing something, the hitch I installed from Amazon said it has a tongue weight capacity of 525 lbs. The dirt bike hitch I have weighs 50 lbs plus a DR350 (285lbs) puts safely under. It's pretty thick metal and held up going 70mph on highway.
The biggest issue is speed bumps because RAV4's aren't very high you scrape the ground if going too fast.
Trailer hitch is the way to go. Curt is the brand I would go with. You are not going to get anything to haul anything heavier through straps or roof racks.
For the Chevy volt you can get a Class 1 hitch, which is the smallest possible. It's a 200 pound max tongue weight, 2000 pound max pull.
This means that if the bicycle rack + bike is more then 200 pounds then that is no good. The hitch will run a 90-110 dollars. Usually you can install it yourself.. no welding or drilling is usually needed, but each car is different. If you are not confident or want somebody else to do it then it would probably be another 50-100 bucks.
Garages can build custom hitches for not much more expensive so if you really want class 2 somebody would build one for you.
You can get bike racks designed to hold the bike up by the tires for full suspension mountain bikes.
Or you can get one for a dirt bike:
https://www.amazon.com/Best-Choice-Products-SKY1375-Motorcycle/dp/B00916MMJGThat one is a small motorcycle rack for class 2 or better, which you will have to hack and shorten to fit into a class 1. The difference between the class 1 and class 2 is that class 1 has a stop in it to prevent class 2 stuff from fulling seating.edit: sorry the description in the ad was misleading. 2 inch hitch is class 3 or better. Class 1 and class 2 are 1 1/4 inch hitch.
You might be able to get away with a mountain bike rack if it's pretty heavy duty.
The alternative to that is to get a small trailer.
Small trailers are available for harbor frieght for cheap and people modify them to haul dirt bikes around. It's a bit more expensive and the most annoying part is that you'll have to register the trailer. The upside is that they are small enough you can hide them in sheds or put them against the wall in the garage. But it will have zero problem with that bike and any other equipment you would like to haul around.
I needed a riser anyway to get the rack higher off the ground so I bought this http://www.amazon.com/gp/product/B00FAUF4TW?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
Have to make sure you also buy an anti-rattle device to make sure it doesnt sway, but it works like a charm!
This is the carrier I bought btw: http://www.amazon.com/gp/product/B00916MMJG?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00
This would be your best bet imo
https://www.amazon.com/dp/B00916MMJG/ref=cm_sw_r_cp_apa_i_-C0dBbDHVV0EW
I know you're asking about ramps for getting your bike in the bed of the truck, but I use one of these and find it much easier to load and unload alone.
Yeah, it seems a little sketchy but I've never had any issues or concerns one I have my bike strapped down properly.
Yeah, I bought the same thing from amazon. http://www.amazon.com/Best-Choice-Products-SKY1375-Motorcycle/dp/B00916MMJG?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_search_detailpage
Gotta have some tools to assemble, but after that it's solid!