Reddit Reddit reviews Blade 120 SR RTF

We found 2 Reddit comments about Blade 120 SR RTF. Here are the top ones, ranked by their Reddit score.

Toys & Games
Hobby Remote & App Controlled Vehicles
Hobby RC Helicopters
Hobbies
Hobby Remote & App Controlled Vehicles & Parts
Blade 120 SR RTF
Sub-Micro size100% factory-assembled, test-flown and ready-to-fly right from the boxUnique rotor head designed specifically to provide inherent stability of a coaxial helicopter, but pFactory installed 5-in-1 control unit with Spektrum 2.4GHz DSM2-compatible receiver, main motor ESCs
Check price on Amazon

2 Reddit comments about Blade 120 SR RTF:

u/joshellis625 · 4 pointsr/radiocontrol

First of all, I would never attach your cell phone to a helicopter (I doubt many--if any, could even hold it). They make cheap cameras that are made to attach to the bottom of RC helicopters. Go that route :)

Now I just sort've got into this hobby. I know very little but I can give you some advice.

There are 3 types of RC Helicopters:

-Coaxial = two sets of rotor blades (not including tail rotor) EASIEST AND CHEAPEST
-Fixed Pitch = single rotor with fixed blade pitch EASIER AND CHEAPER
-Collective Pitch = single rotor with controllable blade pitch HARDEST AND MOST EXPENSIVE

Those are also listed from easiest to hardest to fly. You can learn to fly a coaxial in like 20-30 minutes if that. Coaxial heli's will easily hover with little to no controller input as the gyro/accelerometer does all the work and dual rotors are inherently stable. A good first coaxial could be the Syma S107 @ $27. Feel free to skip to a fixed pitch heli if you are daring but with the Syma S107 being less than $30 you should still get it.

Fixed pitch heli's are an entirely different animal as I've recently learned. They are much less stable than a coaxial helicopter but not uncontrollable if you are patient and careful. The physics behind a FP heli is much different than a Coax. These heli's are also more powerful (usually) so be very gentle otherwise you'll be replacing parts even more so than you will normally. YOU WILL NEED TO BUY REPLACEMENT PARTS. YOU WILL CRASH. Keep in mind though, it's not completely terrifying :). Don't be afraid to learn. I love and recommend getting a Blade 120 SR @ $160-180. I just got one and I love it. It's so fun. It's so appealing to fly a single rotor heli because it's more realistic and challenging.

Finally, you have Collective Pitch helicopters. These are what the "pros" use. The rotor blades have a variable pitch that allows for very intense and tricky maneuvers. These are sometimes called 3D helicopters because (if you are skilled enough) can fly them upside down or any direction in between while zipping through the air. I don't know too much about them because I'm still learning to fly a fixed pitch heli. Do NOT start with one of these helicopters. The Blade 450 3D @ $470 is a common example of a Collective Pitch 3D helicopter. As you can see they are quite expensive.

Helicopter Cameras: EXAMPLE

TL;DR: Start with a coaxial (Syma S107) to learn. Then move up to a fixed pitch helicopter (Blade 120 SR). Buy lots of replacement parts/training gear/flight sim (optional). Get used to crashing. Don't fly too high at first. Have fun!