Reddit Reddit reviews Blade Inductrix RTF Ultra Micro Drone with Safe Technology

We found 13 Reddit comments about Blade Inductrix RTF Ultra Micro Drone with Safe Technology. Here are the top ones, ranked by their Reddit score.

Blade Inductrix RTF Ultra Micro Drone with Safe Technology
Lightweight, fully assembled Ultra micro RC drone6-8 minutes flight timeSAFE technology with self-levelingBrilliant LED orientation lightsRTF includes: Inductrix RTF RC Drone | DSMX 2. 4GHz transmitter | 150mAh 1S 3. 7V 25C Lipo battery |USB LiPo charger | 4 x AA alkaline TX battery
Check price on Amazon

13 Reddit comments about Blade Inductrix RTF Ultra Micro Drone with Safe Technology:

u/ChinaMan28 · 5 pointsr/diydrones

I never thought the flybrix was worth it...it's a gimick in my mind...

Look into the Eachine QX90...

http://www.banggood.com/Tiny-QX90-90mm-Micro-FPV-Racing-Quadcopter-BNF-Based-On-F3-Flight-Controller-FrSKY-Taranis-X9D-p-1069614.html?utm_source=google&utm_medium=cpc&utm_content=allison&utm_campaign=Smlrfpv-ds-58fpv&gclid=CMW10MXBrc8CFYpZhgodeW8M1A

For $55 bucks you not only get a pretty fun brushed quad, it comes with FPV too (you'll still need a video reciever for the video, but it will work the same if you don't use the FPV unit)

You will also need a Transmitter, something like a Devo7e will work...

http://www.banggood.com/Wholesale-Walkera-Devo-7E-7CH-Transmitter-Mode-2-Without-Receiver-p-48117.html

Thats another 60 bucks...but it will bring more joy to flying than using a shitty bluetooth app...

Since the QX90 doesn't come with a reciever you'll need one...

https://www.amazon.com/Spektrum-9645-DSMX-Remote-Receiver/dp/B004M12GY6

Thats 34 bucks but I think you can find it cheaper...

I mean for a little more than the cost of the flybrix you get something that will be 100x more enjoyable to fly and not only that if you wanna spend a bit more on some FPV goggles you'll have an FPV miniquad too...So much more bang and fun for the buck...

Or you can look into the Induxtrix FPV....not released or shipped yet, but it's all the rage for indoor fun...

Your tech director seems like he thinks he's a "know it all" kinda guy...but he's pretty wrong if he thinks the flybrix is cheapiest and most robust...

Also, I know you want the ability to control via iOS/Bluetooth, but honestly you really don't. It's pretty terrible to fly anything via a phone and it teaches you bad habits. why not just go with proper equipment and not teach your students bad habits when it comes down to it? it's not much more expensive, and in the end it's gonna be a lot cheaper..as you'll still be able to use a proper Transmitter if you decide to upgrade the quads pretty much forever..with the flybrix you are kinda stuck with the app, and what happens when they stop support for the app?

Edit: the ready to fly inductrix is even cheaper and if you wanted you can get a proper transmitter for less than the flybrix...

Blade Inductrix RTF Ultra Micro Drone with Safe Technology https://www.amazon.com/dp/B011UDQYSC/ref=cm_sw_r_other_apa_3Mv6xbTVS308F

Just look up Tiny Woop FPV and you can see how much fun and more safe it is to fly than the flybrix...i mean you weren't looking for fpv flying but it's till a cheap option if you want to move to fpv too..

Edit2: also you should know that brushed motors for these kinds of quads have a finite lifespan before the brushes wear out and you need to replace the motors...the lifespan is generally around 5hrs of use... So yeah take that into account too...

u/KingOfAllBlacks · 3 pointsr/Multicopter

Id look into an inductix or something similar. Works with a full sized Tx and has a real acro mode. Everything else is still toy grade like the X5C

https://www.amazon.com/Inductrix-Ready-Ultra-Micro-Technology/dp/B011UDQYSC

u/eviljolly · 3 pointsr/fpv

A whoop can be loosely defined as a micro sized FPV quadcopter, often with upgraded motors. The Inductrix is the most commonly used quad to start with, but there are alternatives.

u/ReptarGG · 3 pointsr/roosterteeth

This aircraft alone was about 300 or 400$ however you can get a full fpv setup for 300$ total now. Check out this video but I would use this controller over the flysky one. Also a great starting point is the Blade Inductrix because you can learn the basics inside and eventually convert it to a Tiny Whoop if you want. Furthermore, /r/multirotor has great resources for beginners.

u/SawcasmOfficial · 2 pointsr/Quadcopter

I know you don't want to get him a toy drone, but the truth is, most new flyers are going to be crashing a lot. Learning on a toy drone is a great way for him to get his feet wet (and learn how to fly) without risking crashing a more expensive model right off the bat.

With that said, I think this is a nice middle ground: https://www.amazon.com/Blade-Inductrix-Ultra-Micro-Technology/dp/B011UDQYSC/ref=sr_1_1?ie=UTF8&qid=1480114664&sr=8-1&keywords=inductrix+rtf

Yes, it is technically a toy drone, but he'll have lots of room to tinker with it and upgrade it later on. This drone very commonly has its motors upgraded and a tiny camera added to be able to fly in FPV (First person view). So in addition to getting a great beginner's quadcopter, he'll also have room to upgrade and modify it down the line once he starts to get the hang of it.

With the rest of the budget, you can buy him some spare batteries and motors that he can upgrade to when he's ready to do so. (He'll need a soldering iron for that, but I assume since he's a "tinkerer" he probably already has one. Might be worth inquiring to see if he does.)

Motors: http://micro-motor-warehouse.com/collections/tinywhoop/products/cl-0615-14
Batteries: https://www.amazon.com/Battery-Inductrix-200mAh-HOBBYTIGER-Batteries/dp/B01LZFKULR/ref=sr_1_1?ie=UTF8&qid=1480115135&sr=8-1&keywords=tiny+whoop+batteries

u/polytrigon · 2 pointsr/fpvracing

If you wanted to go cheaper you could do this:

Blade inductrix w/o the camera, comes with controller - $70

Eachine Camera/VTX - $25 (sometimes deals come up and these are only $17)

Gteng T909 FPV LCD - $46 (I've seen these for as low as $25 if you shop around)

Total - $141

Here's another way to go. This way is ULTRA cheap:

Eachine e010 tinywhoop clone + controller - $17

Eachine Camera/VTX - $25 (sometimes deals come up and these are only $17)

Gteng T909 FPV LCD - $46 (I've seen these for as low as $25 if you shop around)

Total - $67

The downside to the eachine is that the controller is truly horrible but w/e the inductrix one isn't any better. If you do get into it you're going to spend money on a far better controller in the future.

You still need to buy batteries and a charger which is another $20 but you'll need that with any setup you get.

EDIT: Here's how you assemble a tiny whoop

u/Alrik · 1 pointr/gifs

If you're not too interested in FPV video, the Blade Inductrix is basically identical to the Tiny Whoop, but only about $70.

I've got one, and it's been a ton of fun.

And if you want FPV video, there's a $200 model of the Blade Inductrix that has it. (This is actually the one I have, and I'm having a blast with it.)

One thing worth mentioning, though: for micro drones like these, those tiny batteries only have about 3 - 4 minutes of flight time (charge via USB in about 20 minutes) so you'll want to plunk down a few extra bucks to get a handful of extra batteries.

u/Domri_Rade · 1 pointr/drones

Trying to find this drone online and found this one for 70 https://www.amazon.com/Blade-Inductrix-Ultra-Micro-Technology/dp/B011UDQYSC same thing?

u/monkey_jumper · 1 pointr/drones

I own a Syma X5C-1(I paid $40 but OMG they're $60 now), Cheerson cx-10($20), and a Blade Inductrix($70).

The Inductrix is the best indoors (very small, quiet, and very maneuverable), and the X5C is best outdoors. Both are very easy to fly, but they do take some practice. I am an experienced RC plane pilot and it took me about 1 to 2 hours of stick time to get the hang of the quads. Getting extra batteries speeds up the learning process a lot.

BTW, the cx-10 likes to go full throttle and hide under furniture so I hates it quite a bit.

u/icefreez · 1 pointr/Multicopter

You can buy him an inductrix to learn to fly, in Acro mode and self leveling mode (Critical skills to flying bigger drones)

Then if he proves he can handle that and fly it well you can try and help him learn how to mod it with an FPV camera and goggles.

u/skyvette427 · 1 pointr/TinyWhoop

Thank you!

Here's what I plan on buying so far

u/LOOKITSADAM · 1 pointr/videos

Pfft, I wouldn't recommend building one right off the bat anyways. That's a lot of fiscal and emotional investment for something that's gonna crash and burn in the first couple months anyways. There's a bunch of cheap, wonderful, learner 'toy' grade ones out there to whet a curiosity.

Good luck with your degree. I wouldn't know where to start with that, mine was in Computer Science.