Reddit Reddit reviews Brother Sewing and Quilting Machine, CS6000i, 60 Built-in Stitches, 2.0" LCD Display, Wide Table, 9 Included Sewing Feet

We found 75 Reddit comments about Brother Sewing and Quilting Machine, CS6000i, 60 Built-in Stitches, 2.0" LCD Display, Wide Table, 9 Included Sewing Feet. Here are the top ones, ranked by their Reddit score.

Brother Sewing and Quilting Machine, CS6000i, 60 Built-in Stitches, 2.0
60 Unique built-in stitches: The Brother CS6000i includes 60 built-in sewing stitches, including decorative stitches and 7 styles of auto-size buttonholesAutomatic needle threader and drop-in top bobbin: This sewing and quilting machine includes an automatic needle threader that perfectly pushes thread through the needle and a convenient, jam resistant drop-in top bobbinIncluded accessories: The CS6000i includes a hard protective case, wide table, 10 sewing feet, needle set including twin needle, 3 bobbins and moreLCD Screen: Easily select your stitches with the touch of a button and view your selections on the LCD display25 Year limited warranty: The CS6000i is backed by a 25 Year limited warranty with free technical support for the life of the product
Check price on Amazon

75 Reddit comments about Brother Sewing and Quilting Machine, CS6000i, 60 Built-in Stitches, 2.0" LCD Display, Wide Table, 9 Included Sewing Feet:

u/Kristeninmyskin · 21 pointsr/sewhelp

Congratulations! You’ve chosen a wonderful and practical hobby! I took sewing classes in my early teens and did nothing until years later, when I wanted to make a Halloween costume. Thank goodness for the internet! I’ve found YouTube to be an invaluable tool. If you’re old school, your local library has books on sewing.

If you’re serious about sewing, you’ll need a machine. I love my Brother cs6000i! It is priced well and comes with a lot of accessories (including a walking foot!), is very user friendly, and has great reviews! You don’t need a new machine, you can purchase a used one and be just fine. Try yard sales or thrift shops. Most companies have downloadable manuals for their machines if your used one does not come with one.

Other supplies you’ll need:

  1. Thread
  2. Needles, both machine and hand sewing
  3. Scissors; purchase two pairs. A nice pair that you only use to cut fabric, and a cheap pair for cutting out patterns, stabilizers, interfacing, zippers, etc.
  4. A seam ripper, although you might hear it called a stitch picker
  5. Chalk or washable fabric marker
  6. Measuring tape
  7. Pins, a pin cushion to hold them
  8. Seam gauge
  9. Iron and ironing board

    Except for the actual machine, most of the items you’ll actually need are relatively inexpensive. Things just add up when you get to the fabric store/ sewing center and want to buy everything!


    Depending on what you sew, the following items are helpful:
  10. Thimble
  11. Needle threader
  12. Thread snips
  13. Tracing paper and wheel
  14. Pinking shears
  15. Cutting mat and rotary cutter
  16. Fabric glue
  17. Fray check or similar


    Don’t go out and purchase a bunch of notions right away. Buy your buttons, zippers, ribbons, etc. as you need them for each project.

    You might try some simple craft projects like this pouch to accustom yourself to sewing and your machine before you tackle clothes. You can search YouTube for project ideas and tutorials. Some of my favorite sewing channels on YouTube are:


  18. Made to sew
  19. So sew easy
  20. The Crafty Gemini


    Hope these help and happy sewing!
u/BiBiBicycle · 13 pointsr/GaySoundsShitposts

Sure! YouTube is great for stuff like this because you can watch people do it. Here is a video I found after a brief search:

https://youtu.be/OVXd951Q8ss

Also, look up craft stores (Michael's is a major chain) and fabric stores (Joanne's). Many of them have free to attend sewing classes that will help you get started. Honestly, once you know the basics it's really about patience and practice. The hardest part is getting the seams straight, lol! Just buy a little extra fabric for your first project and just try it out with the scraps. Honestly after learning the VERY basics (how to thread a sewing machine and bobbin, use a needle and thread, sew a straight line) I just started doing projects that weren't too complicated. Pillows are GREAT for learning because it can be as simple as three straight lines with the machine but you can also add zippers, piping, darts, etc. And if it turns out bad, you can usually cut the stitches and reclaim the fabric if you're tight on cash. I don't even know, like, the different names of the different stitches and when they should be used. Some things to look up/read about before you get started:

  • Sewing with a needle and thread. This should include: how to knot the thread at the beginning and end, maybe a couple different types of stitches.

  • threading a sewing machine and bobbin (the bobbin is a second, mini spool of thread that goes underneath the fabric in the machine)

  • terminology like darts, pleats, gathering, hem, etc

  • different types of fabrics like jersey, chiffon, felt, satin and when and how they should be used

  • what is a sewing pattern and how is it used

    And honestly, most everything you buy for sewing comes with some kind of instruction. Hell, Joanne's has little instruction pamphlets for different techniques just hanging around the store. I wanted to give you good links but I would've just been googling variations of the above and I figured it's better if you pick the sources that explain things in ways that make sense to you. Also, the basics of using a sewing machine will be included in the manual that comes with it, so unless you're getting one from someone else or already have it that should help as well. A sewing pattern has two parts: there's the shapes on transparent paper that you cut out and pin onto the fabric as a template/stencil for cutting, and then actual instructions (often with diagrams) that show how you sew each piece together. It's kinda like buying one of those furniture kits that come with everything but you have to buy and cut the wood yourself. I doubt anything in a basic pattern will be so complicated that you can't Google around and figure it out, it just probably won't look great the first few times you try it! Sewing in a straight line is honestly the hardest part.

    As for sewing machines, here is the one I have had for two years:
    https://www.amazon.com/dp/B000JQM1DE/ref=cm_sw_r_cp_apa_o4lVAbSPM88PT

    It has way more functions than I will ever use, but it's good quality. A little expensive if you're broke, but if you can afford it I recommend it. If not, Brother is a good brand in general and probably has some cheaper options.

    It'll also probably help you to familiarize yourself with general fashion terms, like different types of skirts and dresses, patterns and fabrics so you can search easily for patterns. A line, mini, midi, maxi, bodycon, cropped, shift, etc are terms you could look up with "skirt" or "dress" that will probably lead you down a rabbithole. Or just "types of skirts" and stuff, search on Google images. That'll give you an idea where to start. You really don't need much to start sewing, a set of needles, thread, pins, and a bit of fabric is more than enough to start learning and you can get fabric samples for free at pretty much anywhere that sells fabric.

    Sorry I don't have any specific resources, my mom taught me the basics and I just learned as I went with the rest. But you don't even need to be great at it to get something wearable. Most people aren't gonna notice if your hem is a bit crooked or you've got a wobbly seam. Oh! You can also practice by cutting up old clothes and sewing it back to practice repairs/patches, or just tailoring it to practice alterations! But seriously, I bet if you walk into a fabric shop and just tell the person behind the fabric counter you know nothing about sewing and want to start, they'll set you up.

    Oh! A note about buying fabric. The fabric section of a shop will have its own country. You browse through the rows, find your fabric, then bring the whole bolt up to the counter and tell them how much you want, in yards. They'll cut it for you and give you a receipt that you take too the cashier to pay. The fabric store can be a bit intimidating so I thought it might help to know what's going on. I'm just gonna recommend Joanne's again. I use them all the time, they have a big selection of fabric but also other fixings for sewing and some more general craft stuff. They also have a lot of articles, how tos, and shopping guides on their site. Highly recommend it. I am currently reupholstering my couch (kinda, more like sewing on a custom sofa cover) with $125 worth of stuff from Joann's. They are great, and again, host cheap classes like this one where you can use their sewing machines so you don't have to buy your own.

    Sorry for just barfing up information, like I said I'm not formally trained, I just know that I end up pretty happy with stuff when I sew it (far from perfect but I've only been doing it on and off a few years) and that's all I really care about. childhood dreams of meeting Tim Gunn be damned.

    Good luck and post or PM me if you make something you're proud of! :)
u/everythingispurple · 10 pointsr/malefashion

okay, so I'm going to write a really long post right now. the point is to show you guys how easy sewing is and maybe convince someone to pick up a machine and save some $$$.

at the start of last summer I knew nothing about sewing or garment making/tailoring at all. I picked up a Brother CS-6000i because of its reviews and price.

my first project was this pencil pouch clutch thing I made for my girlfriend: pic. It's small enough that I was able to get fabrics from the remnants bin at JoAnn's. I used the tutorial here.

second thing I ever made was a purse for my sister: pic. it's a really simple 3-piece pattern. The tutorial came from a book called Sew Everything.

... then I took a really long break from sewing.

my most recent two projects are in this album. I just decided to dive into patterns and learn whatever I didn't know along the way. Keep in mind every pattern comes with detailed directions on how to construct the garment. The directions are brief but are great about using descriptive, established lingo. You can youtube almost any term and get a detailed video on how to carry out that technique. the whole process is really just a matter of sewing cutout pattern pieces right sides together (so the seams are hidden when the right sides are turned outward), and doing that in the correct order. then seams that aren't sewn to another piece (such as the bottom hem on a pair of jeans) are turned inward a couple times so the raw edge is hidden, then sewn with a straight stitch.

as far as alterations go, I just modified a couple pieces I got from uniqlo: pics. the shirt was a basic tee made from a jersey fabric (think basketball jersey). it was very long overall, so I cut the front shorter than the back. then I just did a zig-zag stitch to give it a semi-finished look that also keeps the fabric from fraying. I did the same to the sleeves to keep it uniform. the jeans are a "slim" uniqlo cut, and I tapered them below the knee. this made them fit throughout the whole leg, but they are much more comfortable than the "skinny" cut because they still have the higher rise and wider seat. it's almost like a very subtle drop-crotch. I'm really happy with the jeans and think I might taper slim cuts rather than buying skinny from now on.

/r/sewing is a helpful subreddit, but it's a lot of quilts, baby clothes, and womens clothing. I would love to start a male sewing/alterations subreddit if a few people would contribute.

u/IDontClare · 8 pointsr/sewing

If you had to pick one of these for a beginner machine which would you pick?

(SINGER | Heavy Duty 4423 Sewing Machine)
https://www.amazon.com/gp/product/B003VWXZQ0/

(Brother CS6000i)
https://www.amazon.com/gp/product/B000JQM1DE/

Beginner Goals: Alter t-shirts for better fit, repair tears on thrift finds.
More future goals: Actually make clothes from fabrics. Likely not jeans since I imagine that would require a bit more powerful of a machine.

Zero experience in sewing atm. Both these machines look great. The singer looks a little more sturdy though. Any feedback or recommendations?

u/mildsamosa · 6 pointsr/sewhelp

I have this Brother CS6000i

I really love it and when I took a sewing class the instructor used this same model as her "traveling machine".

It looks like it also won some Women's choice award for most recommended machine.

Good luck!

https://smile.amazon.com/gp/aw/d/B000JQM1DE?psc=1&ref=ppx_pop_mob_b_asin_title

u/[deleted] · 6 pointsr/malefashionadvice

Does my new sewing machine count?

I've already ruined one pair of pants and a shirt. Fortunately the nearby thrift stores give me a large supply of practice garments.

u/ri0tnrrd · 5 pointsr/sewing

From the wiki this article has a review of best machines for a beginner. That being said my machine just broke and so I just yesterday ordered this machine from Amazon because for the price it's pretty decent and it came with a free arm extension and a cover. The price range you have is more than decent for a good machine that should last you through the years.

u/kindacountry · 4 pointsr/sewing

I'm a beginner and recently got the Brother CS6000i. I'm pretty sure this machine can do anything I need it to do, and when I purchased the machine it came with all kinds of different feet to use. I really like it, and once I read the manual it was really easy to figure out. https://www.amazon.com/Brother-Quilting-Stitches-Auto-Size-Buttonholes/dp/B000JQM1DE

u/rawrfuzz · 4 pointsr/CraftyTrolls

I also recommend a brother machine. I've had mine 7+ years and not a single issue with it. I would buy brother again if I needed to replace mine. I am somewhere in between beginner and intermediate skill level, and this was the machine I started out on
http://smile.amazon.com/dp/B000JQM1DE


This one on amazon is under $100 and has lots of reviews, looks like people are quite happy with it
http://smile.amazon.com/dp/B000F7DPEQ

u/catkeepsclimbing · 4 pointsr/sewhelp

That was my budget for my first (and current) sewing machine and I chose this one from brothers . So far it has been working very well and is easy to figure out quickly. I’ve use it mostly to make doll beds/clothes and pillowcases. I had some issues making button holes though that I haven’t gone back to.

u/LizzyLemonade · 4 pointsr/femalefashionadvice

I just started sewing and I really love it! I have this machine that everyone from my sewing instructor to my more crafty friends have said is one of the best beginner machines out there.

u/Boston_Jason · 4 pointsr/frugalmalefashion

Just pulling from my amazon list: $125ish? Bought all from the amazon warehouse. It is really super easy to do. Menswear is just patience and only cutting once you are sure of the hemming. It's easy to take a seam ripper and start over if you make a mistake.

  • https://www.amazon.com/Brother-cs6000i-60-Stitch-Computerized-Sewing/dp/B000JQM1DE
  • https://www.amazon.com/Fiskars-Piece-Rotary-Cutting-Set/dp/B000B7K9UI/
  • Various pins + pin cushions, seam ripper, and Gutermann Thread.

    I took a class at a local fabric store (101 level) to learn my machine, but YouTube works too. I like the shop at the end of my street so I don't mind giving her my business. Took an hour to really get to know my machine, another hour printing off instructions on how to hem.

    I did my summerweight jcrew chinos that I got on clearance last year this past weekend and it took me an hour to do 6 hems. Wear them inside out, pin at the correct length, steam that hemline, measure +2 inches, fold over one inch, then again for a perfect hem. I basically do one leg at a time, and copy the other leg.
u/arcessivi · 4 pointsr/SewingTips

Hi, I teach sewing, so I get this question a lot and hope I can help!
I personally suggest investing a bit. It doesn’t have to be he most expensive machine, but don’t buy the cheapest machine either.
I’d suggest trying to find a machine that uses metal parts on the inside as opposed to plastic. The machine will be heavier, but it’ll last much longer.
You also have to decide if you want a mechanical or electrical machine. I personally prefer mechanical, just because I feel like I have more control over the machine. A lot of people like electrical though because those can do decorative stitches.
An electrical machine We suggest to a lot of our students is:
Brother CS6000i Feature-Rich Sewing Machine With 60 Built-In Stitches, 7 styles of 1-Step Auto-Size Buttonholes, Quilting Table, and Hard Cover https://www.amazon.com/dp/B000JQM1DE/ref=cm_sw_r_cp_api_9TJXAb5A6KQ64
It’s a good machine to start out on. I don’t believe it has all metal insides though.

I think a great beginning mechanical machine is the Huskavarna Viking 116. You can find Huskavarna dealers set up in some Jo Ann’s stores (not all Jo Ann’s though, so you’ll have to check first).
I love this machine because it has all metal parts, and is a pretty solid machine. Also, the company offers a free class to show you all the machine’s features, which is really helpful.

I would generally stay away from Cheap Singer machines. Since Singer has been around for a while, many people who are new to seeing assume they are good machines. Unfortunately though, Singer machines have really seen a decline in quality over the past 20 years.

Like I said though, you probably want to invest a bit in a machine. Even a $200 machine can work really well. Just don’t get the cheapest machine you can find, because those ones often have a lot of problems and can be very discouraging to new sewists.

Let me know if you want more advice. If you give me more details about what you’re looking for, I can probably help you narrow down your search!

u/harlow_designs · 3 pointsr/sewing

I just learned how to sew this year and this has been an awesome machine.
https://smile.amazon.com/gp/aw/d/B000JQM1DE/ref=ox_sc_act_image_1?smid=ATVPDKIKX0DER&psc=1

u/ishman2000 · 3 pointsr/malefashionadvice

Im in the same boat. I recently lost weight and went from a 34 waist to a 31. All my clothes look baggie which in turn make me look even more skinnier (like sick skinny). My suits and dress slacks were sent to the tailors because I was afraid that I would ruin them - albeit pricey.

I ended up biting the bullet and bought a Brother sewing machine off of Amazon and had it delivered a few days ago. Its a Brother CS6000i. I'm still reading the +30 page manual but I'm learning its not too difficult to learn basic sewing. Practice first and make sure you use the correct needle and thread.

[(https://www.amazon.com/gp/product/B000JQM1DE]

Im aiming to use the machine to "slim down" my dress shirts as well as taper a few pants and shorts. Ill probably use it on my polos and t-shirts as well.

There are great videos online on how to do this.

u/tz67 · 3 pointsr/quilting

This Brother was my first machine. yeah, it has fancy stitches you'll never use, but I made dozens of quilts from this machine. It worked like a charm and still does.

u/SnugglersMom · 3 pointsr/CraftyTrolls

Brother CS6000i Feature-Rich Sewing Machine With 60 Built-In Stitches, 7 styles of 1-Step Auto-Size Buttonholes, Quilting Table, and Hard Cover https://www.amazon.com/dp/B000JQM1DE/ref=cm_sw_r_other_awd_KbzGwb4HTNABS

I cannot recommend this enough. It's my second sewing machine. My first was my grandma's from the 1940s then this. Comes with lots of accessories. I bought mine "used" from amazon warehouse for I think $125 because the box was beat up (but the machine and all accessories were perfect and present). I have nothing to compare it to but the 5k reviews on amazon loved it and I have been very pleased with it.

u/LadyTigerSnake · 3 pointsr/sewing

I love my Brother. The foot pedal is optional and the speed is adjustable.

u/fabricwench · 3 pointsr/sewing

The Brother CS6000i is pretty popular and reasonably well-reviewed at Amazon, it is also available at Walmart. The advantage to buying it at Walmart is that you can inspect the box before you buy it and return it if it has problems. I have not sewn on this machine myself but it is often mentioned in these kinds of threads and it does have a drop-in bobbin.

I think a used vintage machine is a great value but it helps if it has been recently serviced or you are willing to do some repair work yourself. You might ask the sewing repair place if they have any vintage machines for resale.

I am always a little suspicious of newer machines on the second hand market. It's hard to know if they are being sold because the previous owner lost interest or because the machine is a lemon. Also, sewing machines are happiest when they are used regularly, machines that have been sitting around for a couple of years can have mechanical problems from not being used.

u/tasharanee · 3 pointsr/craftit

I've been having a blast with this one from Brother. I've been sewing since I was 5, and it's a great machine for me. I've also taught teenagers to sew with it, and they find it quite easy because of the variable speeds. It's one that your sewing skills will never outgrow.

u/LSM52 · 2 pointsr/xxketo

I bought this machine on Amazon to keep at my sister's house for when I visit. It's quite inexpensive and I was pleased with it.

u/maybel8er · 2 pointsr/sewing

Also, I'm planning on getting this sewing machine.

Is this going to be good enough for what I want to do?

u/kilamumster · 2 pointsr/Frugal

Sewing in a straight line is a great frugal life skill. Very basic sewing machines can be found for well under $100, a very good sewing machine can be found for around $150. Amazon had the Brother CS6000i on lightning deal for $115 a couple of days ago (I missed it-- FFFffuuuuu!!!!).

You can also sew by hand. Sure, IKEA (and other merchants) may carry iron-on hemming tape, but don't expect it to last thru a single washing/dryer cycle.

WalMart has fleece by the yard, but check on the sale prices of ready-made new or thrifted fleece blankets too.

I forgot to mention that craigslist and freecycle, etc., may be a good resource too!

u/abhikavi · 2 pointsr/quilting

I have a Brother CS-6000i and I love it, for quilting and everything else. I don't know if it'd suffice for a full-time quilter, but it's been over a year for me as a heavy part-timer. It has a great price on Amazon for $140 and comes with all the feet you need for basic quilting-- a stipple foot, a walking foot, and you can buy an attachment for a 1/4" foot cheaply, although another quilter I know with the same machine just uses a basic foot with tape at 1/4".

What's your price range? I have other quilters I could ask for recommendations.

u/sacca7 · 2 pointsr/quilting

This machine, Brother CS-6000i has gotten great reviews and I've considered it myself. This one or the Singer 7258 are ones I've been considering (I'm not OP). However, I wondered if, with more money, I'd be better off spending more. From your reply, it seems it would do the trick.

It does not have an automatic tie off, am I correct? The Singer 7258 does, apparently.

However, the Singer does not come with an oversized table for quilting, nor does it come with a quilting foot, both things I'd like.

Thanks for sharing.

u/Jaded_rose · 2 pointsr/quilting

I have had this machine 5 years and highly recommend. It is a very reasonable price for quilters on a budget (currently $160).

Pros: It had good stitches for appliqué as well. It uses very basic parts which means finding extras are easier. I got a great package and have all the feet and can also use prewound bobbins. Lightweight makes it easy to take to classes or if one has limited space requiring them to put the machine away at times.

Cons: normal harp space definitely means larger (queen+) quilts are harder to complete. Definitely requires practice to maintain good stitches for FMQ and tension can get off over time.

Like r/30allmylife the only reason to not buy again is if one is ready for a larger machine. Brother csi6000i

u/greeneyedbaby190 · 2 pointsr/sewing

I got this brother swing machine and have been quite pleased. I'm still brand new, but this one comes with all the key features you need at a price that is beginner friendly. After learning more I actual regret that I didn't get a serger instead...so make sure that isn't what you need for the projects you are interested in. Very pleased with my purchase for a sewing machine though!

u/must_be_the_mangoes · 2 pointsr/sewing

Howdy r/sewing. I'm a complete begginer looking for my first sewing machine with a $200 budget. Starting off, I intend to mostly stick to basic alterations on cotton, poly and denim shirts and pants. Based on my research, it seems like the general consensus is to get one of these three machines:

Brother XM2701

Brother CS6000i

Singer Heavy Duty 4432

Out of the three, which do you recommend the most for my uses? Is there anything in particular I should be looking for? Thanks!

u/alanae · 2 pointsr/sewing

This is the machine that I used to have, and it was great to learn on. It's very easy to use and has plenty of stitches. https://www.amazon.com/Brother-Feature-Rich-Stitches-Auto-Size-Buttonholes/dp/B000JQM1DE/ref=sr_1_1?s=arts-crafts&ie=UTF8&qid=1480647780&sr=1-1&refinements=p_89%3ABrother

1 - sews knits without a problem although I prefer to baste and then just use my Brother serger. 2 - haven't tried heavy wool or denims. The manual indicates that it can handle it but ymmv. 3 - LOVE the button hole function and wish that I'd bothered to learn it years ago. SO fast, easy, and even. 4 - comes with a twin needle but I've never tried it 5 - it does have plastic housing and is light-weight, but it's lasted years for me. Yes, it will walk a bit if I sew at the highest speed, but I just press on it as I'm feeding the fabric. Irritating but not a deal-breaker for me. 6 - plenty, especially on Amazon. 7 - Pretty cheap, and you can probably also get it at Wal-Mart if there is one nearby.

Also, it has an automatic threader although I just use the tweezers from my serger, and it has a drop-in bobbin. It's easy to thread, to change stitches, and to change feet.

u/vworp-vworp · 2 pointsr/sewing

My older brother ordered this for me last Christmas and I love it. It's so easy to set up and I find it to be well built. I've sewn through denim and two layers of suede with it and had no problems.

http://www.amazon.com/Brother-Affordable-60-Stitch-Computerized-Free-Arm/dp/B000JQM1DE/ref=sr_1_1?ie=UTF8&qid=1345324960&sr=8-1&keywords=brother+sewing+machine

u/Teabrat · 2 pointsr/sewing

I used for 5+ years, a cheap Brother Machine (CE4000) and I was impressed with how well it worked for basic sewing. Its still going strong, I just passed it along to another family member after I upgraded to a more heavy duty machine.

The CE4000 is no longer available, but there are models that are comparable to it around $150, Like CS-6000i which has 4.5 out of 5 stars with 1248 reviews. It is also available on Amazon.com Cs-6000i on Amazon.com

u/Verhexxen · 2 pointsr/sewing

For $150, the machine mentioned above, Brother CS-6000i

For sub $200, Brother HC 1850

I may be semi partial to Brother at these price points, but these machines should last until your skills are to a point that you want to upgrade to a more professional machine. Another option in your price range is to find a vintage machine and have it serviced, but that's not something I've done so I don't have much experience with it.

u/Gullex · 2 pointsr/malefashionadvice

This is the sewing machine I got, highly recommended, it does EVERYTHING.

u/cajolerisms · 2 pointsr/TrollXChromosomes

This is the machine I have: https://www.amazon.com/Brother-Feature-Rich-Stitches-Auto-Size-Buttonholes/dp/B000JQM1DE

It has more features than I know what to do with, but is very user friendly. Plus it's held up well to me carrying it around town while bar hopping (celebrating the completion of a project in design school and not having a place to put it after).

The only thing is to follow all the instructions when threading the machine. There's one tiny part that's easy to overlook if you rush, which can make the stitching come out wonky.

u/fawnmm · 2 pointsr/sewing

Thanks everyone for posting here! I'm starting to get the crafting/sewing bug as of late. It's been years since I've used a sewing machine. I used my mother's old singer that would CONSTANTLY break down. I'm currently looking at a $200 Babylock from a local retailer or this http://www.amazon.com/Brother-Affordable-60-Stitch-Computerized-Free-Arm/dp/B000JQM1DE/ref=wl_it_dp_o?ie=UTF8&coliid=I2ZS4EM7J1UZ08&colid=2E8QLK67608UJ Brother machine.

I love the idea of buying sheets from thrift stores to use for fabric! I was in a thrift store the other day and had a thought of using towels they had to make half aprons out of. I have an itch to make some aprons as I just bought one online and was not terribly impressed with it.

I'm currently in research mode of looking for a sewing table as I have no where to put a sewing machine if I bought one right now. I'm looking for one that has some storage and can fold up and be disguised as just another piece of furniture since it will be going in our guest bedroom. I love the link to the table that anniebme. Does anyone have a nice sewing set up that they could post pictures of?

Any other hints or tricks anyone else can share? Websites they frequent other than the awesome links that kitanne shared?

u/naiche_unit · 2 pointsr/sewing

I have this sewing machine, and I really like it. I had a couple of used sewing machines in the past that gave me some trouble, so I decided to buy a new machine.

It's great for beginners/intermediate sewers. It's relatively inexpensive, and a dream to thread (my old machine was a nightmare to thread/reload bobbins, so I really appreciate this feature).

Its not super heavy duty, but unless you want to sew denim, leather or other very heavy materials, it shouldn't be an issue. If you do, then you should think about another machine.

u/fropny · 2 pointsr/sewing

I have the brother CS6000i and I love it. My mom has it too and also loves it. No, it's not made entirely of metal like a vintage machine, but it is WONDERFUL. It sews like a dream and is just plain fabulous. I can't recommend it enough.

u/Ayendora · 2 pointsr/sewing

Brother are amazing machines, I honestly cannot recommend them enough and their entry level machines are pretty damn good as well.

These are a few a quick amazon search in your budget have shown, Brother typically have a machine to suit every budget and every level of skill so I am sure you will be able to find a decent machine, for you Wife's Birthday,


Brother CS6000i

Brother XR9500PRW

Brother Project Runway CS5055PRW

I would just say though, that a sewing machine is a piece of equipment that really does improve with the amount of money you are able to spend. All brother machines are good, But there will be a significant difference between their budget range at $100 - $300 or so,and their high range $300+.

Not only that Sewing machines can have huge lifespans for example.

My machine was £109 18 months ago and I wouldn't change it for the world. My Mums machine £200 10+ years ago. My Grans machine £75 in 1965 or something like that, all three machines are still going strong.

u/justforflan · 2 pointsr/rawdenim

This guy can do most everything except it doesn't have the automatic thread cutter that my machine has. It just means you'll need to cut the threads with scissors every time you finish a stitch.

u/SunburnedZombie · 1 pointr/financialindependence

Awesome! I have about 4 shirts that were gifted to me that I never wear because they look like parachutes on my frame. I'm tall and not fat so every article of clothing made since about 1960 is either huge on my body or sleeves are too short! I've had this one on my wishlist since march!

u/VaurienVixen · 1 pointr/sewing

Hello! i'm looking to get into sewing and i was wondering what machine i should get. i have already done some research and know i don't want to get some cheap $20 walmart kiddie machine. I have narrowed my choice to two options i think look okay?

https://www.amzn.com/B003VWXZKG

https://www.amzn.com/B000JQM1DE

I'm am planning on making things like plushies out of fabrics like minky. And costume pieces out of denser fabrics like shag fur and vinyls. as well as stuff like fixing clothes and such. including jeans.

so basically, something that can take a little abuse(?) but i'm not going to be doing super heavy duty work i believe.

the singer machine is cheaper and looks nice, but, i don't know if i should go ahead and shell out the extra money for the brother machine. do some brands last longer than others? i know brother is a name i hear a lot.

u/LEDOM-JAMES · 1 pointr/streetwear

This is the sewing machine I use :)

https://amzn.com/B000JQM1DE

u/MangerDuAss · 1 pointr/sewing

What about this machine? It looks like a complicated machine, but I'm thinking that if OP gets bored of sewing, it would be easy to sell it and recoup her money. Reg $449, on sale for $114!

u/Drpepperholik · 1 pointr/quilting

Glad I could bring you to the digital side! :) Someone mentioned this one in another comment and for what it's worth my favorite LQS has this as their spare machine for classes and I've heard good things. I really don't think you'll find a knee lift feature on machines until you get into the higher price ranges, all Brother machines even in the lower price range have the speed control, auto needle threader and needle up/down. I don't think the Singer machines have the needle up/down or speed control unless you go up in price range. Janome machines have speed and needle up/down but even their cheaper computerized machines are around $300.

u/Pm_me_some_dessert · 1 pointr/quilting

I've had this machine for a few years now, had it maintained/cleaned once at my local shop and haven't had any issues other than the walking foot breaking on me. :( It's never really more than the price it's currently listed for, I don't know why Amazon bothers posting it as being "on sale" as that's always the price.

u/warlock1111 · 1 pointr/sewing

I started with a basic brother that I got on sale for about $100, it died, conveniently, about 2 months after the warranty ran out. I am currently using this brother, and it is way marked under in price (currently $150 US). Fabulous beginner machine, easy to use, and has many decorative stitches. You really only need the straight and zig-zag stitches, but it leaves lots of room for growth! It also has a decent warranty.

I will say this is not a powerhorse machine, but I can get through 3 layers of denim without a hitch on it. Also, I have used their chat to troubleshoot issues on at 3 occasions, and they have been quite good at addressing my issues.

To your requirement of stretchy fabric, use ballpoint needles, and this machine will work just great. I have a set of back supports that are really rough on my skin, so I made a few "sports bra" looking garments without even worrying about it, came out just fine. It also comes with 6 or 7 changeable feet, does button-holes automatically, and I do buttons with it too. I love my machine quite a bit!

u/that_was_a_pune · 1 pointr/Random_Acts_Of_Amazon

Need? Kinda hard to justify that with most of my list.

Somewhere between need and want would be This sewing machine. I'm trying to get better at sewing, especially costume making, and I have an overlocker for heavier costume materials, but it only really does edges and stuff well. If I need to sew something in the middle of fabric (like, say, a breast pocket), I have to hand sew it as I don't have a regular sewing machine.

u/fabricrobot · 1 pointr/sewing

Sometimes the search for an all-metal machine can be a while, I don't think there's anything wrong with a simple brother machine. I have one very similar to this and it does everything I need it to.

u/lintacious · 1 pointr/Frugal

I had one of those <$100 sewing machines for ten years.

When it finally stopped working, the shop said it would be a $50 repair so I gave it away on Freecycle.

I replaced it with this and love it. I sew a handful of times a month and do not need anything more expensive or powerful than that.

u/Faerin82 · 1 pointr/sewing

I really like my brother cs6000i. I don't know what you consider relatively inexpensive, but it's under $200.

https://www.amazon.com/dp/B000JQM1DE/?tag=raketzcrafts-20

u/ToiletSpiders · 1 pointr/sewing

I'm still a beginner really, but last year I bought myself this machine and I love it!

Brother CS6000i Feature-Rich Sewing Machine With 60 Built-In Stitches, 7 styles of 1-Step Auto-Size Buttonholes, Quilting Table, and Hard Cover https://www.amazon.com/dp/B000JQM1DE/ref=cm_sw_r_cp_api_9sGsybTC407ST



It's well within your budget, so I would pair it with these must haves for sewing/quilting.

Fiskars Rotary Cutting Set https://www.amazon.com/dp/B000B7K9UI/ref=cm_sw_r_cp_api_IuGsybYXBGVY7

Dritz Deluxe Seam Ripper https://www.amazon.com/dp/B0001DSIVY/ref=cm_sw_r_cp_api_svGsyb0XBGHNQ

Best Titanium Scissors - 3 Shears in One Pack - Precision Cutting Blades For Sewing - Office Scissors - Art and Craft Set - Sharp Scissors That Wont Break https://www.amazon.com/dp/B017FT5OJA/ref=cm_sw_r_cp_api_.vGsybVQ6H09H

She really will need those things! All total this should be about $200, but she will still need thread & fabrics. This is where I would suggest a gift card to your local craft store so she can pick out her own.

To me, that would be the perfect gift set for someone wanting to get into sewing and quilting.

The machine itself, I really like as a beginner. I have made 5 quilts this year, as well as Christmas stockings, quilted tote bags, a table runner, a few pillows, etc.
It was really easy to set up. Eventually if she gets really serious with the hobby she will want to upgrade. But personally I'm totally satisfied and don't foresee myself upgrading unless it breaks or something.

u/FragrantTurnover · 1 pointr/sewing

I bought this machine and I call it my sewing machine for dummies. It works great and is simple to use. It also has a speed control bar so the machine can be slowed down for beginners or children learning to sew.

https://www.amazon.com/Brother-Quilting-Stitches-Auto-Size-Buttonholes/dp/B000JQM1DE

u/wintercast · 1 pointr/disney

Nice machines are not loud and dont have crappy stitching. I am sure the machines used in school were crappy machines and it is no wonder they would turn you off sewing.

I have no experience with Brother. I found this on amazon. http://www.amazon.com/Brother-Feature-Rich-Built-In-Auto-Size-Buttonholes/dp/B000JQM1DE

I personally own a Bernina. They make high quality machines. It was my grandmother's and i received it after she passed away. It is not digital but it is a true workhorse and has been put through the test as far as thick fabrics go. Mine is closest to the Classic 1008. I would guess mine to be about 20+ years old. I doubt a brother would last that long.

I make a lot of ren fest garb, along with most recently my own wedding dress.

I think with the right tools, sewing could be enjoyable for you.

u/ashabellanar · 1 pointr/quilting

I have a Brother CS-6000i Computer sewing machine. It's stitch #22.

I'm new to the whole sewing machine thing...is the presser foot the thing you deploy down onto the quilt, that the needle feeds through? If so, I just use the default one that's on the machine. "N" type, I think is what my screen says when it's on.

Amazon says that the foot that comes mounted is "J" or the "Zigzag foot". I'm still pretty sure the computer screen says "N". Maybe you're supposed to use "N" and I'm using "J"? I don't know. I'd trust Amazon, though, because I've got no clue what I'm talking about.

u/ScraptasticQuilter · 1 pointr/quilting

Great Machine

This was my first machine. I read tons of reviews online, and it’s consistently rated highly, and is a very decent price. Highly recommend!

u/Brenan008 · 1 pointr/sewing
u/lilianaleto1 · 1 pointr/quilting

Machine Manufacturer and Model Number: Brother CS6000i

Year purchased: 2014?

Condition: New

Price paid: Thought i paid $120 at the time, now $150

Link to website or blog describing machine features and a photo : Amazon

How long have you used the machine: 4 years

Things you love: When i bought this machine I only had the knowledge i'd learned way back in middle school home ec and youtube videos so this machine was just perfect for a beginner! Its extremely easy to thread and has many different stitch options (though i've only used a few). Its lightweight, which made it perfect to carry down to my local quilt shop for some classes. And i am ashamed to say that i never had it tuned up or cleaned but it keeps on trucking!

Things you hate: The throat is soooo small! I did manage to finish some twin sized quilts on there and they turned out ok but they could have turned out better, plus it was hell on my hands squishing and rolling the fabric to fit in there!

Any continuous problems? None! That machine put up with a lot of abuse

Would you buy this machine again if it broke down today? Yes, its still great for sewing clothes. Recently upgraded to a nicer machine for quilting so this one is now my backup but she gets the job done!

Additional thoughts or special info: Its a great machine for beginners, so easy to use and learn on and mine at least really held up to a lot of abuse!

u/susandennis · 1 pointr/sewing

I recently bought a Brother cs6000i after a year of a Pfaff (that cost 4 times as much) and a Singer (about the same price). The Brother is BY FAR the best, most versatile of the three. I love sewing with it way more than the other two. I have no trouble with thick or elastic or delicates. I make knit tops, rag dolls out of a bunch of different stuff and swimsuits. And I mend, patch and tweak all kinds of other clothes. I also use it about 3 hours every single day.

u/wcatie · 1 pointr/sewing

I've been looking into getting my first machine for a while, and was originally looking for an antique Singer but there aren't many around my area in good condition, so I've started looking into other options and this was one of them!

Hope you don't mind me asking, but do you know if there are any big differences between the one you posted and the Brother CS6000i model?

I'm still really new to this and not sure what to look for when comparing machines. I would mostly be using it for making, tailoring, and repairing clothes. I am also interested in quilting, but I don't think I will be able to commit the time/money for that hobby for at least 2 years.

u/smallpoly · 1 pointr/sewing

I'm just starting out and haven't bought my first machine yet, but the Brother CS6000i has ~5 stars after 3600 reviews on amazon and goes for $144.

Their serger($204) and embroidery machine($300) are highly reviewed best sellers too.

The embroidery machine is apparently also adequate at sewing, so I'm considering that as a starter and possibly picking up the serger later.

If you're looking for something at a more prosumer level then someone that actually knows what they're doing should be able to help.

u/alilja · 1 pointr/malefashionadvice

I don't know what your budget is, but this sucker's been a huge hit.

u/constipated_HELP · 1 pointr/malefashionadvice

First, don't buy a singer simple. I've been having nothing but problems with mine - for a time I attributed them to the engine not being powerful enough in any inexpensive machine, but I looked at reviews and ordered this one. It'll produce far better results and fewer headaches.

I just started on my own. I've never looked at a guide. Just pay attention to stitch widths and copy those - my first mistake was using far too tight a stitch. You want to be able to undo what you've done.

u/Talashandy · 1 pointr/Random_Acts_Of_Amazon

This sewing machine. For years, I've been compiling clothes from both of my kids to make them quilts (my son is 21, my daughter is 6 mo.). I've never had the money for something like a sewing machine to actually do these projects. I can't hand-sew, cause, well, it's a quilt and I have carpel tunnel. I put it on my wishlist as a reminder that I really want to make these, and that it's one of those big ticket items I'd like to have someday. Would I be ok with never getting it? I suppose. It's something I'd like to do for my kids, so that someday, they can pick it up and smile, then wrap it around them and keep warm :)

Lucy in the Sky with Diamonds!

u/rayofsunshine20 · 1 pointr/secretsanta

My first sewing machine was a $50 Brother machine I bought on Black Friday about 8 years ago from Walmart, it's the same machine they have every year and it's still going just fine. I've taught 2 kids how to sew on it so it's very user friendly and super simple. If budget is a big issue then it's a good one to get.

If you can go a little higher in price I suggest this one It's around $125 on Amazon. It's also a Brother and again very user friendly but I love it because there's the option to not use the foot pedal and being able to push a button is so much nicer to me. It comes with a ton of stitches, some that are great for quilting and if I remember correctly it comes with a quilting foot also. I have this machine and I've used it pretty much daily and it still works great. It's not what I'd call super sturdy but I did have it in the back seat one time and had to slam on the brakes so it went flying into the back of the seat and into the floor and the only damage was the little metal part that the thread goes through was bent. I just pulled it back into place an it was like nothing happened so it can take some punishment.
There are a lot more higher end options that you can always upgrade too but for budget simplicity these both would be good options.

When I had the chance to upgrade I decided that since my machine was still going great after 3 years I'd just keep it and move on to other things I wanted like a serger and embroidery machine instead of upgrading the sewing machine.

When you do get around to the quilt, don't shy away from using a quilt shop to do the actual quilting part. I did for the longest time and did the quilting myself on the sewing machine or by hand and it worked okay but I finally bit the bullet and discovered a local quilt shop that takes the pieced top, adds the batting and back fabric and quilts it all together and adds the binding and it was like $30 for a twin size quilt. It's so worth and the fun part is piecing together the top anyways.

Feel free to PM me if you have any questions. I love my gadgets so I'm always happy to talk about them.

u/KealeysMama · 1 pointr/sewing

My mom gave me this Brother CS6001i for my birthday...

http://www.amazon.com/Brother-Feature-Rich-Built-In-Auto-Size-Buttonholes/dp/B000JQM1DE

I was previously using an old Kenmore that was handed down by my MIL. That was okay, but my lord, I LOVE my Brother. It comes with SO MUCH. It's so easy to use too (I still consider myself a beginner). The book helps me with any issues, but there's also a TON of help online. I can't recommend this machine enough. The price you pay for what you get is just awesome. LOVE IT!

u/thehybridfrog · 1 pointr/malefashionadvice

I would like to buy a beginner's sewing machine to modify pant length/shirt length/hem. I've narrowed it down to these options:

  1. Brother XL2600I

  2. Brother CS6000i

  3. Ikea SY

    Is the CS6000i worth almost twice as much as the other 2 options? Is the Ikea SY good enough compared to the slightly more expensive XL2600I?
u/sobok · -1 pointsr/sewhelp

>As a spoiled daughter

>now that I'm older (18)

I dont know if you just dont realize how you sound, or if you're doing that on purpose. Thanks for the giggles.

Your machine should straight stitch, zigzag stitch. When i started i didnt do anything other than that really. Even today, most of what i do involves that.

Im assuming you know how to use Google and Youtube's search bar. Type in the kind of seam or technique you want.

>4) I have no clue what I'm doing. I only have visions of what I want to make. Anyone have tips?

Hire someone? Start much smaller.. like pillows?

The first thing i assisted sewing with was a Marie antoinette style gown. The second thing i made, I drafted the pattern and sewn myself - It was a playboy bunny suit, drafted by wrapping press and seal around my body. I used google and youtube, just typing what i needed to know as it happened. HOWEVER. Thats a god-awful way to start (press and seal is uncomfortable.)

Get a machine with the basics. Other people can probably tell you better machines, but i got myself this one. I like it, think its fine, i know some people have different opinions.

After that, sew a couple pillows. Thats boring and sucks but whatever do it. Do a couple more projects like that, like aprons or something. Things you can do with cheap fabric that you wont be sad about fucking up.

Get some patterns from McCall that you like. They have basic ones and stuff. Do them. Follow the directions. google questions, if you dont find the answer its probably here. use the search feature first...

Then, after a while of doing patterns, getting used to how patterns work and come together, try and make patterns on your own. Google it.

If you read all that and thought "well sewing pillows sounds boring and im probably good enough to skip that (even though i dont have a machine nor have i stitched a thing before) and McCalls patterns look ugly" then congratulations you're just like how i was and i have no advice for you, because we dont deserve advice or hand-holding. good luck.