Reddit Reddit reviews Cable Matters Rack or Wall Mount 24-Port Cat6, Cat 6 Keystone Patch Panel (Blank Patch Panel)

We found 28 Reddit comments about Cable Matters Rack or Wall Mount 24-Port Cat6, Cat 6 Keystone Patch Panel (Blank Patch Panel). Here are the top ones, ranked by their Reddit score.

Accessories & Supplies
Electronics
Electrical Cord Management
Cable Matters Rack or Wall Mount 24-Port Cat6, Cat 6 Keystone Patch Panel (Blank Patch Panel)
KEYSTONE BLANK PATCH PANEL supports standard sized keystone jacks for audio, video and data; Accommodates an HDMI keystone, RJ45 keystone, RG6 keystone, 3.5mm keystone, USB keystone, fiber keystone, and many other types of keystone jack insertsRACK OR WALL MOUNT patch panel is universally compatible with 19” racks, cabinets, or wall mount brackets with 1U (1.75") standard heightMULTIMEDIA PANEL consolidates voice, data, video, stereo, coax, fiber and other cables types in a single location; Add or upgrade a cable without purchasing a new patch panelCABLE MANAGEMENT BAR with sequential port labels integrated into the panel provides easy identification of multiple types of cables; 24 C-shaped keyholes on the bar accommodate zip ties for securing cables on the keystone jack patch panelSTURDY METAL CONSTRUCTION of heavy duty patch panel includes high impact, flame retardant, powder coated steel, stamped port numbers on the panel front and cable management bar, writable label spaces, and a rear cable management bar to support the weight of 24 cables
Check price on Amazon

28 Reddit comments about Cable Matters Rack or Wall Mount 24-Port Cat6, Cat 6 Keystone Patch Panel (Blank Patch Panel):

u/hkrne · 61 pointsr/homelab

Some ideas (highly contingent upon the angles you’re shooting and level of detail required):

Low detail: Build a rack-sized box, paint black, glue on some front panels such as https://www.amazon.com/Dell-Front-Bezel-PowerEdge-Server/dp/B00VRW998Y and throw some blinky LEDs behind.

More detail: pick up some empty server chassis, again blinky LEDs.

Grab some patch panels e.g. https://www.amazon.com/Cable-Matters-Mount-24-Port-Keystone/dp/B0072JVT02/ and put a bunch of short Ethernet cords between random ports.

u/chubbysumo · 8 pointsr/HomeNetworking

get a keystone based system. Its much easier to work with, and much easier to change around.

https://www.amazon.com/Cable-Matters-Mount-24-Port-Keystone/dp/B0072JVT02

and then use these to fill it in. They come in many colors too, so you can easily identify ports.

u/bhoom_it · 8 pointsr/homelab
u/namodev · 7 pointsr/homelab
u/Robots_Never_Die · 7 pointsr/HomeNetworking

If you want a affordable gigabit setup with Ubiquiti just run this setup.

  • USG $110
  • Unifi AP AC Lite $80
  • TP-Link 8 Port Unmanaged Switch $25
  • 1000' cat 5e $85
  • 24 port patch panel $19

    If you don't have a gigabit connection you can swap out the USG for an ER-X which will knock off $50 but if you have the $50 to spend I would suggest staying with the USG so all your managed products are on the Unifi admin interface. You can also save some money by going with 500' of cat 5e if you don't need the full 1k foot spool.
u/Proskater789 · 6 pointsr/cableporn

We started using cable matters version. Makes life so much easier.


https://www.amazon.com/gp/product/B0072JVT02/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

u/jwheelie · 6 pointsr/homelab

This is what I use in my Enclosure which do the trick.




Cable Matters Rack or Wall Mount 24-Port Cat6 /Cat 6 Keystone Patch Panel (Blank Patch Panel) https://www.amazon.com/dp/B0072JVT02/ref=cm_sw_r_cp_apa_i_oYEOCbG39EJ6




With these




[UL Listed] VCE 25-Pack CAT6 RJ45 Keystone Jack Inline Coupler-Black https://www.amazon.com/dp/B075ZPGV1H/ref=cm_sw_r_cp_apa_i_b2EOCbYDXVKVG



u/zanfar · 5 pointsr/HomeNetworking

> going to connect everything with solid shielded CAT6

You do you, but that's overkill. Unshielded is sufficient in almost any non-industrial application. Shielded is also far harder to terminate and requires more expensive equipment to test.

Solid-core is only for structured cable. As long as you're not making patch cables or terminating to male ends, you're good on that front.

CAT5 is also sufficient unless you want 10Gb speeds, but I realize that CAT6 is sometimes cheaper today.

> what is a good patch panel?

Reputable brand (APC, Panduit, Tripp Lite, Cyber Power, Monoprice, Chatsworth) or reputable consumer-grade (NavePoint, StarTech, Cable Matters). You want to max your ports-per-RU, even if you don't expect to expand. Adding a port is far better than having to replace a patch panel.

For a home network, I would suggest a keystone or modular panel for increased flexibility. Then you would also need to buy keystone IDC, RJ-45 jacks to insert into it. The beauty of modular panels is that you can move jacks around as the network changes, and you can add additional patch types: like coax, phone, or fiber to the same panel. Keystones can also be color-coded for convenience (red for PoE-required, yellow for uplinks/trunks, white orange for critical devices, etc).

This is where I'd start.

> correct me if I'm wrong, I'm a newbie

Nothing obviously wrong with your plan, but just in case I missed something:

Solid core cable from RJ-45 to RJ-45, preferably run inside the wall. From keystone to device purchase pre-terminated patch cables from Monoprice or Cable Matters. Don't make your own patch cables. When punching down cable you should have a decent IDC, snap-action punch down tool and a 8-wire continuity tester.

u/MrTechGadget · 3 pointsr/homelab

You have a 3D printer that can print 19” wide? Nice, but if you have that kind of money, by a proper keystone patch panel for $22.


Cable Matters Rack or Wall Mount 24-Port Cat6, Cat 6 Keystone Patch Panel (Blank Patch Panel) https://www.amazon.com/dp/B0072JVT02/ref=cm_sw_r_cp_api_i_5r-1DbRJD5D9Z

u/stupac62 · 2 pointsr/homelab

If the distances are less than 25’ I buy cables. If longer then I punch down.

But I punch down into keystone jacks. Then you can use on wall plates or a patch panel that accepts keystones. You can change configuration much easier than the patch panels that you punch down to directly.
Here’s what I use: patch panel keystone

u/squirrelpotpie · 2 pointsr/HomeNetworking

After seeing your space (which looks different than I had pictured!) I'll give different recommendations than my other comment. (Thanks, BTW!)

Search for "1U blank keystone patch panel" to find the kind that has everything in one single row. That will maximize closet space. There are probably some 16-port types, but they will likely all be the same width since they're designed to go on server racks. In my brief search the only 16-port ones I found didn't have strain relief / cable management brackets, which are good for keeping the weight of the cable off of the electrical connections.

If the holes in the panel are right up against each other, you will need "Slim" Keystone jacks to fit alongside each other so tightly.

You'll notice the patch panels don't have convenient mounting holes facing the wall. To avoid using a rack or buying an adapter, mount it by screwing into a piece of wood with an angle bracket to attach the wood to the wall. Those pieces of wood could even form the sides of a box, with a cheap piece of plywood as a "lid" to protect the wires. Just make sure you can remove the plywood "lid" to get at the jacks.

I agree with moving the wires further back, though it might make it harder to reach them to attach the keystone jacks. You might have to get all the way inside the cubbyhole to work. Don't kink the wires when moving them. Ethernet has a minimum bend radius. Don't bend the cables tighter than the "O" you can make with your thumb and forefinger when you make an "OK" gesture. Doing so can affect the pair separation and 'twists per foot' in the cable, which is an important signal quality thing. Maybe cover the hole with the patch panel and its box lid.

u/datanut · 2 pointsr/homelab

Cable Matters Rack or Wall Mount 24-Port Keystone Patch Panel

https://www.amazon.com/dp/B0072JVT02/

u/N3rot0xin · 2 pointsr/homelab

https://www.amazon.com/Cable-Matters-Mount-24-Port-Keystone/dp/B0072JVT02/ref=mp_s_a_1_1?ie=UTF8&qid=1538702683&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=cable+matters+24+port+keystone+patch+panel

I do need to add fans to it at somepoint. I'm thinking mount them on the left side to exhaust air from the back. And maybe one on the rack because my modem gets Brett warm.

u/rabidfurby · 2 pointsr/HomeNetworking

I think they meant something like this:

https://www.amazon.com/Cable-Matters-Mount-24-Port-Keystone/dp/B0072JVT02/

"Keystone patch panel" is the search term you want. And don't buy your keystone jacks individually, buy them in bulk. They'll be much cheaper:

https://www.amazon.com/Cable-Matters-25-Pack-Keystone-Punch-Down/dp/B004D5PFGW/

If you look throughout your house where the ethernet ports are, there's a good chance they're also keystone jacks. Picture these, with those keystone jacks slotted in to them:

https://www.amazon.com/Cable-Matters-Plate-2-Port-Keystone/dp/B0072JVU8S/

Also, if you've never used it before, https://www.monoprice.com/ is your new best friend. I'd recommend always comparing prices between them and Amazon before buying something.

u/JrClocker · 1 pointr/Ubiquiti

I used the same adapter to rackmount my USG.

​

If you want to rackmount your switch, buy the 16 port version...not that much more expensive.

​

I built my rack on this, and it's been awesome: 19" Rack with Wheels

​

Here are some other items for your rack:

​

Cable Routing

​

5U Drawer

​

1 U Shelf

​

1 U Power Strip (PDU)

​

Keystone Patch Panel

​

My NAS is rackmount, as well as the UPS.

​

I have the keystone patch panel on the back of the rack. I have all my network stuff on the rack (cable modem, NAS, switches, USG, etc.). I bring all of the connections into the keystone patch panel (ethernet RJ45, telephone RJ11 (comes out of cable modem), RF for cable modem, etc). I then route form the other side of the keystone patch panel into the rack. I made the external connections long enough so that I can easily move the rack to work on it (when it's powered up). However, if I need to move it far, everything just disconnects from the back easily.

u/DaltonCooler · 1 pointr/HomeNetworking

So the builder ran Cat6 to 5 of my rooms + 2 access points. The other end of those runs all congregate in the basement, where the installer put an RJ45 on the end.

Because all the room installs also had coax runs (mandatory), I got an empty panel so I could use coax couplers and RJ45 couplers.

The cables I was trying to make were just 6-12 inch ones that connect that panel to my switch. Which, knowing what I know now I definitely would have purchased pre-made ones, haha.

u/mugopain · 1 pointr/homelab

Cable Matters Rack or Wall Mount 24-Port Cat6 /Cat 6 Keystone Patch Panel

https://www.amazon.com/gp/product/B0072JVT02/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

u/DITPL · 1 pointr/HomeNetworking

I was referring to a keystone patch panel like this: https://www.amazon.com/Cable-Matters-Mount-24-Port-Keystone/dp/B0072JVT02/ The keystone patch panels can have any king of keystones in them: HDMI, Cat5, Cat5e, Cat6, BNC, etc. So, calling it a "Cat6" patch panel is silly.

​

The one that you linked doesn't use keystones, so it's legit. And if it's properly shielded, it could be considered Cat6a

u/Zoxc32 · 1 pointr/HomeNetworking

Oh, make sure you run multiple cables to the room to match the number of devices (Xbox, PC, TV, etc.) just to avoid a switch taking up space in the room.

I'd recommend a modular keystone patch panel to plug all the cables into (you'll need a keystone in each end): https://www.amazon.com/Cable-Matters-Mount-24-Port-Keystone/dp/B0072JVT02

A rack mount where you can mount the patch panel and a switch:
https://www.amazon.com/NavePoint-Vertical-Mountable-Server-Hardware/dp/B01M05Y5KR

You could also go with some other rack mount or even a small rack cabinet. I linked a space saving option, perhaps not the prettiest ;)
You can then get a rack mount 16/24 port switch and mount it right next to patch panel and get a bunch of short patch cables to connect stuff up.

You don't need gigabit or much bandwidth (usually way below 2 Mbps) for gaming, just low latency. An EdgeRouter X with SQM at 100 Mbps could be better than a congested 1000 Mbps link / congested Wifi without SQM when it comes to latency.

u/Browncow8 · 1 pointr/homelab

I personally like Cable Matters brand. I currently have a normal 24 port, but if I were to redo it, I'd get a 24 port keystone one. Easier to install and move ports as needed!

https://www.amazon.com/dp/B0072JVT02/ref=cm_sw_r_em_apa_i_P9UTDbA6P4DCF

u/williamray507 · 1 pointr/HomeNetworking

A keystone patch panel is this https://www.amazon.com/dp/B0072JVT02 and you can get keystone jacks in just about anything you want, RJ45, RJ11, Coax, Fiber, USB and more. Keystone jacks for RJ45 can either be pass thru or punch down.

u/bobby-t1 · 1 pointr/HomeNetworking

They make wall mount keystone panels.

The upsides I see is that I can keep the cables punched down at a consistent place on the wall avoiding excessive cable slack lying around.

I can see merit of just using a keystone panel in a rack though, since everything will be facing forward. Cables go into back of the rackmount keystone panel, then I do the cable connects from the front to the switch.

Again, I'm new to this so not sure which is better.

u/sarge-m · 1 pointr/HomeNetworking

Run one drop on the walls where you know you won’t need additional drops there. If you need to use the single drops in the future, just bring in a switch. For the locations that you need more than one drop right now, just run the additional cables. It’s best to avoid switches in your network.

This is my setup:

Tripp Lite 9U Rack

Cable Matters patch panel x2 - 1U

UniFi switch - 48 port - 1U

UniFi bundle (cloud key, AP, security gateway)

Tripp Lite UPS - 2U

I used Cable Matters Cat6 . If you go with another brand, make sure it doesn’t contain CCA conductors, you want full copper.
Try to avoid surveillance solutions that rely on wireless connectivity, I’m not a big fan of it. Ubiquiti’s surveillance gear isn’t that bad, I believe the UniFi G3 has two way audio.