Reddit reviews CCTREE Creality Upgraded 3D Printer Ultrabase Platform Heated Bed Build Surface Tempered Glass Plate for Creality Ender 3/Ender 3 Pro Ender 5 GEEETECH A10 3D Printer 235x235x4mm
We found 7 Reddit comments about CCTREE Creality Upgraded 3D Printer Ultrabase Platform Heated Bed Build Surface Tempered Glass Plate for Creality Ender 3/Ender 3 Pro Ender 5 GEEETECH A10 3D Printer 235x235x4mm. Here are the top ones, ranked by their Reddit score.
.Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models.Integrated with heated bed: Super Flatness, Fast and uniform heatingDurable: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400ºCEasy to clean: easy to clean by waterSuitable for Ender 3
It's CCTree on Amazon. I'm not unhappy, but it's not what I thought it was. It has a textured side, and a side with an adhesive to stick to the metal bed. The reviews mentioned one side being smooth; which is what I wanted. I have thought about trying to remove the adhesive, but haven't gotten around to it. The textured side has done really good on adhesion issues with PLA, but I was really wanting the smooth surface for the bottom
https://www.amazon.com/dp/B07F6CLTD7/ref=cm_sw_r_cp_api_i_xWjCCb8BBHV6E
I purchased this build plate and was upset when this kind of gel coat came off of it with alcohol. I cleaned it off a kept using it. I love it now. It still has a coat on it. For small parts i still use a glue stick just in case. I got the blue springs also. Its a good set up. I never got 1 good print from my removable bed.
Amazon:
CCTREE Upgraded 3D Printer Ultrabase Platform Heated Bed Build Surface Tempered Glass Plate for Creality Ender 3/Ender 3 Pro Ender 5 GEEETECH A10 3D Printer 235x235x4mm https://www.amazon.com/dp/B07F6CLTD7/ref=cm_sw_r_sms_apa_i_vxQhDb0KMPC83
Not sure if it's the same but mine is the CCTREE Upgraded 3D Printer Platform Heated Bed Build Surface Tempered Glass Plate for Creality Ender 3/Ender 3 Pro 3D Printer 235x235x4mm.
EDIT: ...which is 4mm thick apparently.
I had a problem somewhat similar at times. My ender 3's bed was a bit warped. The buildtak surface worked well (never used tape) but yes, prints were a bit difficult to get off without scraping and damaging myself or the bed surface sometimes. So i bought this: https://www.amazon.com/gp/product/B07F6CLTD7/
And it has changed everything. As long as you get the bed heated up to 60 degrees (and let it sit for a short bit to make sure the actual glass is that temp) you will get fantastic, flat, first layers. And prints that pop off on their own once the glass cools down. Warning, make sure the nozzle doesn't scratch the glass and don't use sharp spatulas on it. I bought these: https://www.amazon.com/gp/product/B075SLTY8B and they work perfectly. Thin, not sharp, flexible, pops things off no problem, even if the bed isn't cooled down.
Hold the glass to the bed with some tiny binder clips. Just make sure the print head doesn't run into the clips and you're good. I ended up changing out the cooling set up so that i had a thinner profile around the extruder to make sure i lost less print area due to the clips. I printed this: https://www.thingiverse.com/thing:2911981 and like it, but there are many other fang style ones out there.
For leveling i use a piece of printer paper, folded over. Took calipers to it and it's about .2mm in that set up and i level just so the nozzle scratches the paper (not holds it) and that seems to work for me.
I recently turned up the temps a bit because I was having first layer going down badly, but I think I over did it a bit and it's giving me a bit of stringing. Other slicer settings tried changing:
The thing that's been driving me a bit crazy is getting the front of the boat there to have a nice smooth surface. The surface didn't really seem to change that much with the reduced jerk / acceleration. What are some things I can try changing to help improve the print?
I did the Capricorn tubing but went with a ultrabase vs doing Boro glass + PEI. I have no complaints with it after 2000+ hours of prints on it https://www.amazon.com/gp/product/B07F6CLTD7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
CCTREE Tempered Glass Plate for Creality Ender 3