Reddit reviews Celestron T-Adapter with SCT 5, 6, 8 with 9.25, 11, 14, Black (93633-A)
We found 4 Reddit comments about Celestron T-Adapter with SCT 5, 6, 8 with 9.25, 11, 14, Black (93633-A). Here are the top ones, ranked by their Reddit score.
The Celestron T-Adapter attaches an SLR or DSLR camera to a Schmidt-Cassegrain telescope for prime focus photographyThreads on to the rear cell of Schmidt-Cassegrain telescopesT-threads accept camera brand specific T-Ring (sold separately)
Connecting the camera: You need an adapter for Canon M to T-mount , like this, and one for T-mount to the telescope. I don't know whether the C5 connection has changed over the past 20 years, but this one will work for the current C5. No eyepiece on the telescope and no lens on the camera, the C5 will act as the camera lens.
That's sufficient for lunar and planetary pictures, assuming you have some sort of tripod.
DSO is harder, take a look at the suggestions in the wiki. The Orion Sirius (aka Skywatcher HEQ5) is pretty much the default recommendation for an EQ mount, but the focal length and focal ratio of your C5 will make long exposures more challenging than with something shorter and faster.
A lower cost way to get started with DSO is to skip the telescope, and instead use a standard lens and a tracker like the iOptron SkyTracker or the SkyWatcher Star Adventurer.
This is everything you need to attack the camera to the back of the scope:
TRing for camera: http://www.amazon.com/Celestron-93419-T-Ring-Canon-Camera/dp/B000237C9M?ie=UTF8&keywords=canon%20t%20ring&qid=1463021630&ref_=sr_1_1&sr=8-1
T-Adapter (connect T-Ring to scope): http://www.amazon.com/Celestron-T-adapter-Schmidt-Cassegrains-Threads-Cell/dp/B00009X3V8?ie=UTF8&keywords=t%20adapter&qid=1463021693&ref_=sr_1_3&sr=8-3
Only thing I'm unsure about is that you might need an additional adapter to convert the threads on the mak to SCT threads (not sure if it has SCT threads or something different)
http://www.amazon.com/Celestron-T-adapter-Schmidt-Cassegrains-Threads-Cell/dp/B00009X3V8
I have this for my C9.25 http://www.amazon.com/gp/product/B00009X3V8/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
It threads onto the back of your scope, and then the camera end t-ring screws on the end of this thing. (Actually, mount it all to your camera, THEN to the scope)
Double check that your scope is supported. I would think it would be.