Reddit Reddit reviews CHPOWER CR-10 Extruder Upgraded Replacement, Aluminum MK8 Drive Feed 3D Printer Extruders for Creality Ender 3, CR-10, CR-10S, CR-10 S4, CR-10 S5

We found 23 Reddit comments about CHPOWER CR-10 Extruder Upgraded Replacement, Aluminum MK8 Drive Feed 3D Printer Extruders for Creality Ender 3, CR-10, CR-10S, CR-10 S4, CR-10 S5. Here are the top ones, ranked by their Reddit score.

Industrial & Scientific
Additive Manufacturing Products
3D Printer Parts & Accessories
3D Printer Accessories
CHPOWER CR-10 Extruder Upgraded Replacement, Aluminum MK8 Drive Feed 3D Printer Extruders for Creality Ender 3, CR-10, CR-10S, CR-10 S4, CR-10 S5
UPGRADE: Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. Upgrade your Creality 3D Printer Extruder with our New "Metal Anodised Aluminum" Upgrade Kit.STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.ADVANTAGES: The advantages of our extruder drive is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers’ performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.Trusted Vendor: CHPOWER is a TRUSTED VENDOR. Buy with confidence.
Check price on Amazon

23 Reddit comments about CHPOWER CR-10 Extruder Upgraded Replacement, Aluminum MK8 Drive Feed 3D Printer Extruders for Creality Ender 3, CR-10, CR-10S, CR-10 S4, CR-10 S5:

u/drwilhi · 5 pointsr/PrintedMinis

Buy an new extruder, the plastic one will start to wear out after your first roll of PLA. Get one of the all metal ones like this

u/DinnerMilk · 4 pointsr/ender5

Thanks for making a new thread. You mentioned pre-assembled and quality/reliability over cost, but do you have a general price in mind?

Extruder

The most popular option is to just go with one of the cheap aluminum extruders. These are a considerable improvement over the stock plastic version. There isn't really much assembly involved, you will need to bolt on the extruder plate/lever and put the spring in, but it's about the most simple upgrade there is.

On the more premium end, depending on which version you buy, a genuine Bondtech comes pre-assembled. It's about $70 more expensive and the benefits are negligible, but that's an alternative.

Hotend

The two main choices for Creality machines are the V6 or Micro Swiss (or a clone), both of which do have some assembly involved.

E3D sells their V6 as a bunch of parts that you assemble yourself, but Filastruder offers it as a pre-assembled version. I believe most V6 clones come loosely pre-assembled as well. Keep in mind however that V6 isn't a direct install, you will need some kind of printed bracket / fan duct like the PetsFang to mount it.

The Micro Swiss on the other hand is a drop-in installation on Creality machines. You do have minimal assembly putting a few parts together, but it bolts up to the stock machine without any changes. I wrote a guide that covers how to do it for the Ender-3, but the Ender-5 uses the same hotend carriage design, meaning the steps are the same.

---

I would personally go with the cheap aluminum extruder and a Micro Swiss hotend. This would be a cost efficient, yet effective set of upgrades for the machine. There is minimal assembly involved, but there isn't much on the market that is 100% ready to go.

u/meleshik · 3 pointsr/PrintedMinis

i have an ender 3 pro and after saying no to any upgrades I finally started to see what everyone is talking about 6 months down the road. here is a list of things that you will see a lot of you tubers tell you to replace. the YouTube channel Tomb of 3D Printed Horrors is a great resource for everything about the ender 3.

  1. new boden tube and couplings that are alot better to use then stock https://www.amazon.com/gp/product/B07DC594D6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
  2. THIS IS A MUST HAVE! a new metal extruder (eliminates a crap ton of extrusion issues) https://www.amazon.com/gp/product/B079JZ374W/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
  3. Glass bed (best bed adhesion with 0 cleanup) this is optional but does solve a ton of issues down the road https://www.amazon.com/gp/product/B07JKGNB6W/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
  4. extra nozzles in a variety of sizes (not needed but nice to play with different sizes and to clear any clogs fast you can just replace the nozzle....i run .2, .4, and .8) https://www.amazon.com/gp/product/B07JPZ7TNX/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

    the YouTube Chanel Tomb of 3D Printed Horrors has a step by step build guide for your ender 3 ( i used it for mine) he will recommend most of this list as well. He also has other videos on the slicer settings you will use for Cura. for D&D models you can use this google doc list https://docs.google.com/spreadsheets/d/1PemvBH7LC-hm4KoeA8OXVu5_k963Vpmw7kOEA_1tzWs/edit?pli=1#gid=0
u/KommunistKamron · 3 pointsr/CR10

Extruder: get a microswiss hotend for it will be able to print flexible and other materials.
Parts cooling: Upgrade to the petsfang 5015 mod for better print cooling.
Auto bed leveling: Get the TH3D ezabl sensor for great bed leveling.
Other mods: motor dampers to reduce noise and vibration
To smoothers to smooth prints
Raspberry pi for octoprint
All metal extruder
Capricorn tubing
Hope I could help 😀
Links:
micro swiss hotend
petsfang part
ezabl sensor
motor dampers
tl smoothers
octoprint link
all metal extuder
capricorn tubing



Also this is what my petsfang with sensor looks like. https://i.imgur.com/sQahB69.jpg

u/yacmed · 2 pointsr/ender3

It looks like the extruder arm may be squeaking the filament against the extruder wheel so tight it is causing skipped steps and filament to wear off on the wheel.

I bit the bullet and got an aluminum extruder arm kit from amazon - CHPOWER CR-10 Extruder Upgraded Replacement, https://www.amazon.com/dp/B079JZ374W/ref=cm_sw_r_cp_api_i_kCaPCbF0AF0C3 - and have had good luck and no more skipped steps since changing.

u/give_me_some_spacex · 2 pointsr/CR10

If it slipped out, then your part is malfunctioning. Go ahead and order those couplers they really do make a world of difference. Also this is the other part I was referring to:
CHPOWER CR-10 Extruder Upgraded Replacement, Aluminum MK8 Drive Feed 3D Printer Extruders for Creality Ender 3, CR-10, CR-10S, CR-10 S4, CR-10 S5 https://www.amazon.com/dp/B079JZ374W/ref=cm_sw_r_cp_api_i_UsYUDbSXJ318G
The hole where your filament feeds into the Bowden tube will wear down over time due to friction. This part needs to be stronger than your filament or it was start to jam/slip.

u/IWasTheFirstKlund · 2 pointsr/Boardgamedeals

Second - some Amazon links for the upgrade pieces I mention:

Springs - https://smile.amazon.com/gp/product/B07SDDHYN4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Bowden Tube - https://smile.amazon.com/gp/product/B079P92HN9/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1

Couplings - https://smile.amazon.com/Dorhea-Straight-Pneumatic-Fittings-Accessories/dp/B07NSRCH2W/ref=sr_1_15?keywords=3d+printer+fitting&qid=1574436375&sr=8-15

Extruder - https://smile.amazon.com/gp/product/B079JZ374W/ref=ppx_yo_dt_b_asin_title_o00_s02?ie=UTF8&psc=1

PEI Sheet - https://smile.amazon.com/gp/product/B07GSJSDWR/ref=ppx_yo_dt_b_asin_title_o00_s02?ie=UTF8&psc=1

Stepper Motor Dampeners - https://smile.amazon.com/gp/product/B07C7FRLNX/ref=ppx_yo_dt_b_asin_title_o00_s02?ie=UTF8&psc=1

Bootloader Flashing Kit - https://smile.amazon.com/Gulfcoast-Robotics-Bootloader-Flashing-Duplicator/dp/B07S5BBLKM/ref=sr_1_3?keywords=arduino+uno+ender+3+kit&qid=1574436535&s=industrial&sr=1-3

Note that I didn't buy this flashing kit, but this one seems to have everything you need to get a bootloader onboard the Ender. What happens is you go through a bunch of steps to attach this so the printer and then put a bootloader onto the Ender 3 board. You only have to do that one time, then you can update the firmware as often as you want - typically via a USB cable. I have Octoprint installed, so I can flash my firmware on my basement printers from my upstairs computer using wifi. Super easy and handy.

u/Pinkhippo11 · 2 pointsr/ender3

I found this metal replacement for $11 on amazon when I had this issue a few weeks ago, such great value

CHPOWER CR-10 Extruder Upgraded Replacement, Aluminum MK8 Drive Feed 3D Printer Extruders for Creality Ender 3, CR-10, CR-10S, CR-10 S4, CR-10 S5 https://www.amazon.com/dp/B079JZ374W/ref=cm_sw_r_cp_apa_i_NzsODb9EGYASC

u/Anarasha · 2 pointsr/ender3

The brass fitting is very important. Your only option if you absolutely can't wait is supergluing your fitting in the hole, but then the seller absolutely won't send you a replacement part. Luckily, replacements aren't expensive, and you can even buy a MK8 metal extruder frame which, honestly, you should do anyway as the plastic one is the absolute worst and likely the first part of your printer that will break

u/borrismchenryjriii · 2 pointsr/3Dprinting

For me, the extruder assembly was the problem, and didn't grip the filament enough.

https://www.amazon.com/CHPOWER-Extruder-Upgraded-Replacement-Extruders/dp/B079JZ374W

I bought that and it worked great, then I upgraded to a bondtech extruder and have had zero issues since

u/NachoFoot · 1 pointr/3Dprinting

There is an all metal extruder. Here's an Amazon link to a popular one that I was thinking of getting before I figured out my problem.

u/ballards_anus_blood · 1 pointr/CR10

This is the one that I got: Title of link (optional) I got a metal extruder housing as well but I honestly don't think it's necessary, just nifty.

u/mofish1 · 1 pointr/3Dprinting

Ah my bad, wrong thread, this one
https://www.amazon.com/gp/product/B079JZ374W

u/HeatherAthebyne · 1 pointr/3Dprinting

https://smile.amazon.com/gp/product/B079JZ374W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Can't speak to whether others have better/worse build quality, but this one's worked for me. I did keep the original screws/metal parts instead of what came with the new one.

u/nmbrguy · 1 pointr/MPSelectMiniOwners

https://www.amazon.com/CHPOWER-Extruder-Upgraded-Replacement-Extruders/dp/B079JZ374W

I’m not logged in on mobile, 95% sure this is it. The only weird thing you need to do: break the lock tite seal on the knurled gear on the stepper [to get it off]. Otherwise you need to buy a special replacement bearing for the one that comes stock in the kit(dunno which one).

u/ender32708 · 1 pointr/ender3


You can just replace the gear, but this is cheaper and better if you haven’t upgraded yet, or get them both 😁


Creality 3D Printer Parts 5PCS Brass Extruder Wheel 40 Teeth Drive Gear for CR-10.CR-10S,S4,S5,Ender 3,Ender 3 Pro https://www.amazon.com/dp/B07BFT6VCV/ref=cm_sw_r_cp_api_i_spo0CbCFA5YSD


CHPOWER CR-10 Extruder Upgraded Replacement, Aluminum MK8 Drive Feed 3D Printer Extruders for Creality Ender 3, CR-10, CR-10S, CR-10 S4, CR-10 S5 https://www.amazon.com/dp/B079JZ374W/ref=cm_sw_r_cp_api_i_Fqo0CbJX7V96H

u/iquitee · 1 pointr/CR10

Do you have this upgrade?

CHPOWER CR-10 Extruder Upgraded Replacement, Aluminum MK8 Drive Feed 3D Printer Extruders for Creality Ender 3, CR-10, CR-10S, CR-10 S4, CR-10 S5 https://www.amazon.com/dp/B079JZ374W/ref=cm_sw_r_cp_apa_i_HH5HDbJQ21BKB

That fixed my problem, tensioner stays very tight now

u/OC_Rookie · 1 pointr/ender3

Mods:

Ended 3 official 1.1.5 from here. All mainboard settings are stock.

Aluminum extruded from here.

Capricorn tubing from here.

Cura 4.1 on Linux

Filament at 210 on hotend, 60 on bed.

u/flatcurve · 1 pointr/CR10

Check that the screw that holds the spring arm on your extruder hasn't backed out. The first time I encountered this problem my prints looked exactly like yours and it took me a couple days to figure it out. It will keep happening too, unless you change out the extruder. It's because you can't have that screw too tight or the arm won't apply pressure. So because it's a little loose, it will slowly work out over time, and there's not very many threads engaged in that hole, so the screw can wobble around.

The cheapest fix would be to install an all-metal replacement for around $13. If you look closely at the link I posted, you'll see that the spring arm has an insert for the screw that will allow you to tighten the screw all the way down but still allows the arm to rotate. I haven't had to re-tighten that screw since I installed it. It works great. Also, if you take a 5/32" drill bit and drill out the hole on the arm itself, you can insert a short piece of teflon tubing into it that will protect the filament from the leadscrew. You can just use a regular wood bit and hand drill. Aluminum drills super easy.

u/wesleeptheylive · 0 pointsr/3Dprinting

something like this? seems inexpensive enough to give it a try. extr