Reddit Reddit reviews Cigar Oasis Caliber IV Digital Hygromter by Western Humidor - Highest rated digital hygrometer for the cigar industry

We found 66 Reddit comments about Cigar Oasis Caliber IV Digital Hygromter by Western Humidor - Highest rated digital hygrometer for the cigar industry. Here are the top ones, ranked by their Reddit score.

Cigar Oasis Caliber IV Digital Hygromter by Western Humidor - Highest rated digital hygrometer for the cigar industry
Advanced humidity sensor maintains accuracy to +/- 1%Pre-calibrated out of the box + User recalibrate-ableThree day high/low & averages for humidity & temperatureSecure magnetic mount, Battery includedFormally Western Humidor, the Caliber series of digital hygrometers have been ranked as the most accurate and reliable hygrometers in the cigar industry and beyond.
Check price on Amazon

66 Reddit comments about Cigar Oasis Caliber IV Digital Hygromter by Western Humidor - Highest rated digital hygrometer for the cigar industry:

u/updog357 · 12 pointsr/cigars

Would you consider a Tupperdor?

Sistema 1870: $20

  • Check locally, Target or Home Goods might have this for less.
  • Any of the Sistema containers are good options. They have clamps and a gasket in the lid to make sure the container stays airtight. Choose the one that fits your needs or a similar product. The 1870 will hold around 80 cigars.

    Boveda Packs: $17

  • Choose the pack that is right for you. Personally I like 65%.
  • If you go with a different size container, you might need to adjust how many packs you get. Remember to get the number of packs per the capacity of the container, not how many cigars are currently in the container. This page will help you determine how many packs you will need.

    Digital Hygrometer: HygroSet II - $14 or Caliber IV - $24

  • Any correctly callibrated digital hygrometer will work.
  • I have both of the above and they are good options

    Spanish Cedar Trays: $13

  • These are not needed, however work well for organization
  • Plastic trays will also work.
  • If you choose a different container, make sure the trays fit.
u/BigB_117 · 10 pointsr/cigars

A few bovida packs to control the humidity:
https://www.amazon.com/dp/B077KVC1VY/ref=cm_sw_r_cp_api_i_3R24CbMC6041A

And any airtight tupperware container. Even one from the kitchen will do the trick. I like these:
https://www.amazon.com/dp/B00284AG5U/ref=cm_sw_r_cp_api_tFGGBbEKPFVT7

For long term storage you may want a hygrometer to monitor the humidity:
https://www.amazon.com/dp/B00JXOKQVW/ref=cm_sw_r_cp_api_lIGGBbM73ZESW

And if you want to get fancy and organize with cedar trays, two of these work perfectly stacked in the container above.
https://www.amazon.com/dp/B0733TYGWX/ref=cm_sw_r_cp_api_SffLBbPJZC8XN

Then store it in a cool part of your house.

u/TheGiant117 · 9 pointsr/cigars



Full Album


This is my biggest haul yet. I’ve spent the last few months working my way through lots of singles. I still have some more I want to try(hence more singles in the haul) but I did find some that I could be happy smoking every day until the end of time. Oh, and the Mayans MC show just started and I’m stoked to start watching.


In the bottom left of the picture are a few cigars I picked up from B&Ms. I get the urge to check out every B&M I see and have to buy something.


The two boxes in the top left are from ihavanas. Partagas Serie D No. 4 and Hoyo de Monterey Epicure No. 2. Never had either one but they’ve been suggested highly by many people.


Everything else is from Fox. If anyone needs more convincing to order from Fox, check this out. I purchased the box of Tatuaje Tattoos, two Boxes of Oliva Melanios, and the 13 singles directly below them. All the 40ish singles below that, to the right of that, all the swag and accessories, were free. A sick Jet Line tabletop lighter, a Lotus tabletop lighter, a 3 finger leather case, an Oliva ash tray, hats, cutters, golf towels, and of course the handwritten notes. u/lvsquared seriously hooked it up! I’m already a customer for life, but now I want to move to Arizona when I retire and work at Fox. Golf, cigars, and whiskey. Sounds like heaven to me.


Check out the album for pics of the tupperdor. I got this Iris Weathertight bin from the container store. This is the 36qt size which I had to upgrade from the 19qt size when I placed this order. This holds about 200 cigars how I have it set up, but could hold much more if you were to keep them in ziploc bags. It has a foam gasket on the lid to keep it sealed. I open it once a day to get some airflow in. I use a Caliber IV hygrometer which I glued some angled metal to and placed magnets on the outside of the box to keep it viewable from the outside. In the bottom of the tupperdor I placed some cedar wood planks to enhance the aroma and act as somewhat of a humidity sponge. For humidity I use 8x 60 gram 65% Boveda packs. To hold my singles I bought Feathergrain wooden drawer organizers. These are the 6”x9”x2” size. I put some hot glue on the bottom of them so they will nest in each other and not slide around. They hold my singles beautifully.


Thanks for reading. I’ve gotta let these babies rest now. I can’t wait to try each one in a month or so.

u/6trees1pot · 8 pointsr/microgrowery

I only thought I knew how to dry cannabis until I got a hygrometer for my jars. Sure boniva packs work, but they only maintain. You still dont know what the actual rh is. A hygrometer is cheap insurance.

https://www.amazon.com/Caliber-Digital-Hygromter-Western-Humidor/dp/B00JXOKQVW/ref=lp_13825071_1_4?s=lawn-garden&ie=UTF8&qid=1525965807&sr=1-4

u/CrazyManInCincy · 8 pointsr/cigars

Prestige Import Group Acrylic Cigar Jar https://www.amazon.com/dp/B003V0OT2G/ref=cm_sw_r_cp_apip_COR472AbrPeZh

Sistema Klip It Collection Rectangle Food Storage Container, 29 Cup https://www.amazon.com/dp/B00284AG5U/ref=cm_sw_r_cp_apip_YASDnJYGbazvb

IRIS 74 Quart WEATHERTIGHT Storage Box, Clear https://www.amazon.com/dp/B00PKNWVZY/ref=cm_sw_r_cp_api_hKUlzb309MDZ1

Caliber IV Digital Hygromter by Western Humidor https://www.amazon.com/dp/B00JXOKQVW/ref=cm_sw_r_cp_apip_pOrWz9na6zdLh

Spanish Cedar Cigar Tray https://www.amazon.com/dp/B00B9234HE/ref=cm_sw_r_cp_api_3nSOyb6BZZT89

Boveda 65-Percent RH Retail Cube Humidifier/Dehumidifier, 60gm, 12-Pack https://www.amazon.com/dp/B00CPPG228/ref=cm_sw_r_cp_api_xoSOybB110T1K

u/Puckfan21 · 7 pointsr/cigars

Tupperware Though this has been cheaper at Target. Ship to store there might be worth it to you.

Hygrometer 1 or 2 depedning on what you like.

Boveda You will need two per container you get. They also have 4 packs. I would suggest 65% RH with a tupperdor.

u/FatFingerHelperBot · 6 pointsr/cigars

It seems that your comment contains 1 or more links that are hard to tap for mobile users.
I will extend those so they're easier for our sausage fingers to click!


Here is link number 1 - Previous text "1"

Here is link number 2 - Previous text "2"



----
^Please ^PM ^/u/eganwall ^with ^issues ^or ^feedback! ^| ^Delete

u/pickboy87 · 6 pointsr/cigars

Here's my advice since I literally just started a few weeks ago. This is exactly what I wished I knew before I spent money on random cigars from various sites.

  1. Depending on how many sticks you plan on getting at a time, invest in a tuppedor. Don't waste your time with a wooden humidor (at least right now). I picked up these from amazon and all my ~40-50 sticks sit comfortably in there.
  • Plastic "humidor"
  • Hygrometer
  • Boveda Packs, although I might lean towards the 65% next time. Also, you only need 1 pack in a tuppedor, 2 is overkill. They can also be recharged, so don't throw them away when they dry out.

  1. If you have a nice brick and mortar tobacco store (not a hole in the wall place that caters only to e-cigs and accessories) near you, visit them and ask questions. If they are worth their salt, they should be fairly knowledgeable about cigars. They will point you in the right direction. I stupidly didn't do this and just kind of bought random shit online and have had mixed results with what I bought. The stuff I've bought at the store has been much, much fresher too. However, you will be spending 30-40% above what you'll pay online. I found it worth it for how much time and effort the staff spent helping me, but it is quite a bit more expensive.

  2. If that's not an option, look for sampler packs online. You can find cheap options that include a bunch of different sticks so you can sample a variety. I would suggest looking at smallbatch mixes find a price you're comfortable with spending (30 to 40 should be plenty, maybe buy 2 of the $30 to $40 packs so you end with ~10 cigars) and in the comment section of your order mention that you're brand new to cigars. He should be able to make an excellent mix for a new smoker. Use code "rcigars" for 10% off (without the "", not sure if valid for the mix).

  3. Also, if you don't come from a background of smoking cigarettes, stick with the mild to medium strength cigars. I smoked a few full strength ones from the samplers I got and they kicked my ass. It was unpleasant to say the least. If you DO plan on smoking a full strength cigar, smoke on a full stomach and drink something sweet with it. Sweet tea or a pop of some sort works well to quell the nicotine content.

  4. Accessories. All you really need is a decent cutter and a torch lighter and you're all set.
  • A cutter
  • A butane lighter
  • Fuel [Note, you can use cheaper fuel, but your lighter may get clogged with shitty zippo butane fuel.]
  • Some sort of ashtray. You don't realize how nice it is to have one until you don't have one and have no place to rest your cigar.

  1. If you do find a cigar you enjoy, try buying a 5 pack of it. Let it rest for a week or so and try them out over the course of a month or several months and see if you enjoy them as much as you did the first time. See if they get better with age. I have far too many 1 offs that I enjoyed, but would I still enjoy them a month from now? 2 months from now?

  2. Oh, and generally stay away from infused cigars. They use shittier tobacco since they can mask it with flavors. The girlfriend still likes these, but I think she's starting to come around to a natural sweetness/chocolate taste instead of an artificially infused one. Plus they stink up your humidor and can potentially ruin the taste of your other cigars in them if they are in close contact.

  3. Online sites that I've enjoyed purchasing from and ship quickly:
  1. Look up retrohaling. You'll taste more of your cigar this way. Warning, it does burn the hell out of your nose the first handful of times you do it. Start with a mild cigar instead of a full strength one like I stupidly decided to do. :P

    Hopefully this helps.

    Edit: Many edits to fix errors and add additional info.
u/captainredbeard3233 · 5 pointsr/microgrowery

Using a Hygrometer. Leave one of these in a jar filled about 3/4 with dried buds. I fill all my jars the same amount so you can assume the relative humidity will be the same for all of them.


Caliber IV Digital Hygromter by Western Humidor https://www.amazon.com/dp/B00JXOKQVW/ref=cm_sw_r_cp_api_i_M6s-AbY9A5C9W

u/TheOneGuyFromNowhere · 5 pointsr/cigars

Looks good. A couple thoughts:

Those analog hygrometers suck. Get a good digital hygrometer. I recommend the Caliber IV.

Which method are you using for humidity control? If yours using the sponge that usually comes with those or "gel" stuff you add distilled water to, I'd recommend ditching it. Boveda Packs are so easy to use and offer 2-way humidity control. That is, they add humidity and remove humidity when necessary. Many humidity control mediums only add humidity.

If you can't maintain humidity, to to a Tupperdor. I use those and I've never looked back.

u/FireHawk3636 · 5 pointsr/cigars
u/blue_garlic · 5 pointsr/trees

Looks great! Haven't grown in 20 years but will again once the kids are out of the house!

FYI, those Accurite humidity sensors are notoriously poorly calibrated and you're probably getting bad numbers from it. Here is an inexpensive one that's much more accurate and will allow you to calibrate if it's reporting erroneous numbers - https://www.amazon.com/Caliber-Digital-Hygromter-Western-Humidor/dp/B00JXOKQVW

u/kawiracer14 · 4 pointsr/cigars

edit: Should have read whole post first, they sent you a digital, that's excellent!

The first thing anyone is going to say is throw away the Analog hygrometer and buy a digital one. Or leave it in there because it looks nice but don't trust it. You can get one on Amazon here or here for cheap that is much more accurate.

Don't trust a few hundred dollars of cigars to a crappy $5 analog hygrometer.

u/Chitties_6941 · 4 pointsr/cigars

I second the one u/Schytzo recommended, and I'd also recommend this one. I have both and they both work great.

u/--fix · 4 pointsr/cigars

TO ALL NOOBS looking to build a tupperdore. Or seasoned guys looking to build yet another: [Here is a great piece of tupperware](https://www.amazon.com/gp/product/B00OW0Y000/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1] on amazon. I recently got it and I couldn't be happier. Great size, great seal, and even has a moisture tray (I just put my boveda packs under that).

Here's a great Humidity/temp gauge

For humidity, Boveda packs are the way to go. A lot of the guys here suggest 65% humidity. Mine is at 69% but I may cut back, we'll see.

Also smoke a Drew Estate - Undercrown. Medium bodied cigar with great flavors and a really nice sweet taste throughout. (Sorry if you've seen me say this many times, it's a great cigar haha)

EDIT Here's another, cheaper tupperware option suggested by /u/nicknameisnub

u/MediocreCommenter · 4 pointsr/cigars

It’s probably not the best, but this one has worked well for me: Cigar Oasis Caliber IV Digital... https://www.amazon.com/dp/B00JXOKQVW?ref=ppx_pop_mob_ap_share

u/Not-A-Peep · 4 pointsr/cigars

Some of the most blueneck people you'll ever meet in your life use tupperdores. I would not suggest you use that hygrometer as it has more of an household/environmental application and is likely going to take up way too much room in any humidor. You want something like this Caliber IV or this HygroSet II.

Also, this is the exact acrylic jar started my collection with and it worked great until I ran out of room. Now I use it for incoming/quarantine purposes. I suggest you do what I did and lose the humidifier puck it comes with and use a couple 65% Boveda packs instead.

u/Eldridge33 · 4 pointsr/cigars

There are essentially two companies selling cedar trays on Amazon. After reading through reviews one company has a bunch of "mold" reviews, wherein the trays ARRIVED with mold already on them. Mold will obviously destroy your cigar habitat. The trays listed below are ones I purchased and came in great condition.

  1. Cigar Oasis Caliber IV Hygrometer
  2. 2 Cedar Trays
  3. 1 Sistema 1870 Klip It
  4. 2 Boveda 69% (60g)

    ​
u/Thinkinaboutu · 4 pointsr/cigars

Analog hygrometers are notoriously shit. A lot of people use the Caliber IV, which comes in a flat and circular version, as it's very accurate and reliable. Personally, I use the SensorPush, as it allows me to check the temp & RH without opening my humidor, via my phone.

u/bojiggly · 3 pointsr/cigars

I'm also new, so this isn't pro advice. But I picked up this humidor.

https://www.amazon.com/gp/product/B003V0OUGQ/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

I seasoned it with distill water, run two 72% boveda packs in it, and have this hygrometer:

https://www.amazon.com/gp/product/B00JXOKQVW/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

the set up is working great, I've got about 20 cigars in it and it looks nice on top of my bureau.

u/ScottAllyn · 3 pointsr/AcousticGuitar

There's not really any particular summer-time care regime for guitars. There are some basic rules of thumb that apply all year round, tho (some of which may be more or less applicable depending upon the time of year):

  • You very definitely want to keep the guitar out of direct sunlight and should also try to avoid exposing it to rapid temperature and humidity changes. Keeping the guitar against a wall that's exposed to direct sunlight during part of the day is probably not a good idea even if no direct sunlight falls on the guitar.
  • Dehydration is much worse than over-humidification, but over-humidification is bad, too!
  • Guitars with solid woods are much more susceptible to humidity issues than guitars with laminated woods... but guitars with laminated woods are definitely NOT immune.
  • Monitor the humidity of the rooms where you play and store the guitar. If the levels fall outside the level of humidity recommended by the manufacturer, take action to increase/decrease the humidity in those rooms or keep the guitar in its case. I personally use 45% +/-5% as my target; realistically +/-10% is probably acceptable. Caliber makes some really nice hygrometers that can be placed around the home and inside guitar cases.
  • Rapid humidity changes are much worse than prolonged humidity changes. A friend of mine kept an acoustic mounted on a wall in his living-room which was right across from a bathroom. Every time someone took a prolonged shower in that room, the humidity level at the guitar would increase to 75% and then fall back down to 40% for the remainder of the day. THAT's not healthy for the guitar!
  • There are a LOT of products that work well for bumping up the humidity level inside of guitar cases. Some of the 2-way humidification systems with the replaceable pouches work quite well, but often don't last very long and cen end up being expensive to maintain (but may be worth it depending upon the value of your guitar). A damp sponge inside a soap dish with holes drilled it in can also be effective...

    I live in Florida where the humidity is quite high; it's currently 6:15am, 75°F and 95% humidity outside. Despite the high humidity, my home is often pretty dry (as low as 36% sometimes) because I keep the A/C cranked year round. For a while, I kept my guitars on the walls, but started noticing that the tops were getting rippled and that the tops and back were looking a bit concave. Now I keep them inside the cases and use Arion Case Humidifiers (wrapped in socks) and Caliber Hygrometers inside the cases:

    https://www.dropbox.com/s/c403mrai9gfpm07/20180530_151913.jpg?raw=1

    https://www.dropbox.com/s/4yxkgtxga3eme5i/caliber-iii.jpg?raw=1
u/Bentwookiee838 · 3 pointsr/cigars

You do not want to use regular cedar. Reason spanish cedar is used on cigars is because it is mold resistant and second aroma. That being said you could get away with an old cigar box or pieces of one but it's not really necessary in a tupperdore. A lot of people including myself are using the below container with the below trays. I will caution you it is hit or miss with the trays. Half will arrive either broken or covered with a dust that looks like mold. I usually order twice what I meet and return the defective ones. As far as hygrometers I suggest not going cheap although with tupperdores it's not even really necessary as long as your container is tight and boveda not expired. I just like being able to look in and see because of my ocd.

https://www.amazon.com/Sistema-Collection-Rectangle-Storage-Container/dp/B00284AG5U

https://www.amazon.com/Spanish-Cedar-Tray-HUMI-TRAY-Cigar/dp/B00B9234HE

www.amazon.com/Caliber-Digital-Hygromter-Western-Humidor/dp/B00JXOKQVW

u/remembertosmilebot · 3 pointsr/microgrowery

Did you know Amazon will donate a portion of every purchase if you shop by going to smile.amazon.com instead? Over $50,000,000 has been raised for charity - all you need to do is change the URL!

Here are your smile-ified links:

https://smile.amazon.com/dp/B00JXOKQVW/ref=cm_sw_r_cp_api_BpmJzbFA4MW01

---

Never forget to smile again | ^^i'm ^^a ^^friendly bot

u/thedogsbollies · 3 pointsr/cigars

When starting out always go for the tupperdor route. It doesnt matter what the environment is the cigars remain the same rh.

​ The default setup for a new cigar smoker is this: Systema container | cedar tray | Boveda 65 | Hygrometer. You could get away with not buying the hygrometer as long as you use the Boveda's but It's always good to know the rh. Other recommendations: The Cuban Crafters Perfect Cutter and another great tool to have is the PerfecDraw, not cheap but worth every penny.

u/Imagi_nathan7 · 3 pointsr/OntarioGrows

Don’t rush the cure is all I can say. I wet trim, put on dry screen until they are crisp but stem doesn’t snap, then into jars for 24 hours (3/4 full only).Check hygrometer the next day, 70% or over I leave lid off for a few hours, then replace and slowly bring down to 62 for a few days. Then throw in a boveda 62 or 55 (whichever you prefer) when it gets to that range, the packs will not bring down humidity but they will maintain or bring up humidity of your jars. Get you some good jar sized hygrometers like these .

You don’t have to buy one for every jar, but at least buy a couple and spread them out if you have a large harvest to get an idea of where your humidity lies.

Edit: 2 weeks minimum cure, longer the better

Edit: don’t have the fans blowing right at the buds and I would say don’t use the dehumidifier in the tent unless it’s just abnormally high, right outside the door would be OK though for ambient humidity.

u/lonelyinsomniac · 3 pointsr/cigars

What's your budget? These get down to 10-15~ on CBid.

u/zyxwvu44 · 2 pointsr/cigars

I got https://www.amazon.com/gp/product/B00EW47X5K/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

and am not a huge fan. Even after calibrating each one they ready way off of my cigar specific hydrometers (which were calibrated in the same wayy).

I think the humidity gets stuck inside the sensor and then just doesn't move. I don't even look at the display for these any more because they are 5-10% off. Wouldn't really recommend this system.

Now i have have two of these: https://www.amazon.com/gp/product/B00JXOKQVW/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

one on top and one on bottom facing the window so I can just look in and see.

u/AztexLA · 2 pointsr/cigars

Like a few have said you should have nothing to worry about if the container is air tight then the bovedas should be doing their job just fine. To dismiss all doubt I really think you should invest in a hygrometer this is the one I and many use and they work! Better to invest a few bucks to have peace of mind your cigars are being taken care than to risk being destroyed by other factors.

u/firstlegalgrow · 2 pointsr/COents

I find that anything more than 4 days is too dry with our lack of humidity, unless it's been raining a lot.
I trim on chop day, hang dry for 3-4 days depending on weather, and then clip off individual buds into a mason jar. Specifically I use the wide mouth pint and a half jars.
I seal them up for an hour or two with a Caliber IV Hygrometer and if it reads over 70% RH, I'll pull them out and set them on a paper bag for an hour and try again. If it reads 63-70%, I blast the air out in front of my exhaust duct for 30 seconds, once per day. It will go down to 35% RH, but after resealing the jar, it will climb back up, usually to 1-2% less than it was before exchanging the air.
When I hit 62%, I will only exchange the air once every 3 days or so.

If I screw up and hit less than 62% after drying and jarring, I'll pretty much let it sit in its own humidity until I want to smoke it.
If I really screw up and it reads 55% or less after jarring, that's when I get spinach/hay weed.

After it's cured for a month or more, you can let the humidity go as low as you want, which usually ends up happening anyway as you open and close the jar(s) to retrieve some to smoke.

u/Braxo · 2 pointsr/cigars

I used Boveda to get my humidor ready.

First. To keep my current cigar stash at the correct levels, I purchased one of their 72% large packs. I put that in and touching my cigars into a gallon zip-lock bag and sealed it. I then put that sealed zip-lock back into another and sealed the outer one. Figured this would create a double-wall environment.

Second. To get the humidor ready, I threw in an 84% Boveda pack. You're humidor looks a bit bigger - so I would throw in two. Close the humidor and let it sit for two or three weeks. This is called seasoning the humidor.

Third. After the two or three weeks, throw out the 84% packs. Then, open your zip-lock bags and place your cigars in your humidor. Also, place the 72% boveda pack in with your cigars in the humidor.

Enjoy your cigars.

One thing you'll prolly want as well is a hydrometer, I use this one and it works fine. You can keep this next to your cigars in the humidor and have it always on so whenever you open the lid you can view the relative humidity (RH). If you notice that the hydrometer is showing a lower humidity than like 67%. Then I would use Boveda's 75% packs and you may need to use multiple (be sure they are rated at the same humidity).

Replace the boveda packs whenever they get hard - should last you two months or more.

u/MoreKarmaOnOtherAcct · 2 pointsr/microgrowery

Buy one of these. They're worth their weight in gold for curing. Even if you only buy one for a single jar, at least it will give you a much more accurate idea as to how most of your jars are reacting.

Caliber IV Digital Hygromter

u/Mitten_Punch · 2 pointsr/microgrowery

Humidity packs will not reduce humidity. You need a Hygrometer in the jar. This is all on the GrowWeedEasy curing page. Suggest a re-read.

u/mile_high_me · 2 pointsr/cigars

Are you in the U.S.?

edit: The reason I asked is because that one only reads temp. in Celsius. Also, I don't think that one can be calibrated. Personally, I'd keep looking. I have this one one and love it.

u/WaitWut405 · 2 pointsr/microgrowery

Gotta buy a calibrated hygrometer, cigar hygrometers seem to be the most accurate those cheap tiny ones aren’t very accurate and can have accuracy that is +/- 10% sometimes which isn’t acceptable for curing cannabis, but you can find a decent one for around 20 bucks.

https://www.amazon.com/Cigar-Oasis-Caliber-Digital-Hygromter/dp/B00JXOKQVW/ref=mp_s_a_1_2_sspa?keywords=hygrometers+for+humidors&qid=1574178978&sprefix=hygrometers&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzR1JGUk9TUlJGTDc0JmVuY3J5cHRlZElkPUEwNzk0MTMzM1BBMTJEVFFEQU9XUCZlbmNyeXB0ZWRBZElkPUEwMzQ4Mzg2MUlURkxUVjBQRFc5OCZ3aWRnZXROYW1lPXNwX3Bob25lX3NlYXJjaF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl

These are a good start, inkbird also makes one for 12 bucks ive heard decent feed back on, but these seem a little more accurate and tried and true by the humidor community.

u/JerusalEmAll · 2 pointsr/cigars

this and this seem to be the prevailing choices around here.

u/thirstyross · 2 pointsr/arduino

First off, thanks for your reply!

> If you want more than 2 of these you need to use a I2C multiplexer because having 2 modules with the same address causes problems.

Makes sense, thanks!

> Tho you might ask yourself why do you want a bunch of temperature sensors in close proximity to each other

I don't have to ask myself, as I know why I want to do it :) It's for curing (medical marijuana), and it's not the temperature I'm interested in, it's actually the humidity (RH).

I need to be able to monitor a series of airtight containers to ensure the RH within them stays in the right range, and if it does not, to alert me in some fashion so I can deal with it (ie. open the containers to decrease the humidity to prevent mold). I thought that if I used an arduino I could purchase high accuracy sensors which would give a little peace of mind.

Until now I have been using these, but I was hoping to come up with something slightly less manual, and that I can check maybe through web services of some kind from anywhere, instead of having to check each one physically.

> Also if your plan is to add wifi, you should just consider using a ESP8266 instead.

Thanks for the tip, I'll check 'er out! Really appreciate your reply!! :D

u/Smokeymountianhigh · 2 pointsr/trees
u/GrandfatherRat · 2 pointsr/homeowners
u/categorical · 2 pointsr/cigars

Some were recently added some have been in for awhile. I buy from local b&m, smallbatch, jr, and famous smoke. I'm not smoking ROTT but giving them some time to acclimate. I'm using this hygrometer Caliber IV Digital Hygromter by Western Humidor https://www.amazon.com/dp/B00JXOKQVW/ref=cm_sw_r_cp_api_fW2Dzb0HXB4MR

u/samsreddit92 · 2 pointsr/microgrowery

I'm not sure what kind of analog hygrometer you got, but I've heard lots of people recommend these for use in the jars. That jar looks fine to me. I've always used regular mason jars, but any glass jar with an airtight seal should work well. You will want to have a place to hang dry the buds, but I imagine you could probably just do that in the space where you grew them. So yeah, the only thing I'm not sure about is your hygrometer.

u/labatts_blue · 2 pointsr/microgrowery

So I'm getting ready for my harvest and thought I would compare my hygrometers to see if any needed calibration. Three have been in jars for a year and two are new. Temp +/- 1 degree, humidity +/- 1%. Can't beat that with a stick! I got them at Amazon.

https://www.amazon.com/Cigar-Oasis-Caliber-Digital-Hygromter/dp/B00JXOKQVW/

u/---YNWA--- · 2 pointsr/cigars

You'll want to get any plastic smell out if there is one. Mine was fine so I didn't bother, but most people say you need to do something to clean it out. I'm going to make a post that gives a full run down of my setup soon, but until then I'll tell you what I use. These trays are perfect. Don't get the small ones, only the medium and large ones. Each shelf in the 281 cooler will hold either 1 large tray or 2 medium trays. On the bottom of each tray I have a piece of Spanish cedar that comes out of cigar boxes. I stopped by my B&M and he let me take a handful that he had laying around. I also have some of these Spanish cedar pen blanks in random spots in some trays. Here is a pic of both tray sizes, with one of the cedar blanks in the middle on the left. Here is a large tray on the metal shelf.Here are 2 medium trays on a metal shelf. Here is a frontal pic of my setup. The top 3 shelves each have 2 medium trays, the bottom 3 shelves each have 1 large tray, and another large tray sitting flush on the bottom. Here is a pic of another configuration I was using before when I kept some boxes in the bottom area. Then I have 2 of these hygrometers using their magnetic discs to sit on the front of the metal shelves. I have 2 computer fans and a timer coming tomorrow that I am going to setup in the bottom shelf to aid in circulation. What's great is that the trays have slots in them already so airflow is great in all areas of the wineador, and you can configure the trays any way you want. I am completely happy with the whole thing, you will be too. And what's great is you can upgrade the setup by getting the really nice custom made drawers in the future, as cash permits. I plan on doing that later this year most likely. It's nice to have a setup that is fully functional, holds a ton of cigars, and can be upgraded over time. Win-win!

u/4gotn1 · 2 pointsr/microgrowery

Hehe I figured, just had to be a butthead about it :P These work well albeit a little pricey kinda.

u/Brundleflypod · 1 pointr/ballpython

I use this one from Amazon, and from what I can tell, it's pretty accurate. It's supposed to be for use in humidors, but it works great in a high humidity environment. I think it came with a magnet, but I never used it since the melamine I used when I built my enclosure is too thick. I just set it on the back wall, near the thermostat probe and my heat source.

u/lunaticfringe80 · 1 pointr/rosin

26c is pretty hot. I aim for 20c +/- 1 degree. 60% RH is perfect as long as it doesn't go higher and there's some air movement, but only indirect. That usually gets me around 64% RH in the jar after 6-7 days hanging. How long did yours hang and did you have a humidor in the jar to measure?

If you don't have anything for the jars, these things are expensive, but they are absolutely worth it for a perfect cure. You done need one in every jar, just enough to cycle through your jars the first week during jar burps.

u/TaylorSpokeApe · 1 pointr/3Dprinting

I have Sterilite airtight boxes and put an Eva-Dry in it. I also have a Hygrometer in the box, and it tells me that the humidity stays about 10% in the box. Nice and dry.

u/tdktank59 · 1 pointr/microgrowery

Sure they work but the Accuracy says +- 5%... Ymmv with these, make sure to calibrate with a bavedo pack or some other way so you at least know how far off it is.

These are a much better option and allow you to adjust +- 6 to calibrate once they arrive.

Caliber IV Digital Hygromter by Western Humidor https://www.amazon.com/dp/B00JXOKQVW/ref=cm_sw_r_cp_api_BpmJzbFA4MW01

Edit: I started with cheap ones at first and then noticed one was 10% off from one of the linked above. I then calibrated all my devices using a 62% bavedo pack and got them all set to the same range and tossed the ones that were off by more than 5% and not aadjustable. Rest I either adjusted or wrote the offset.

To calibrate put them jnto a sealed container with the bavedo pack and wait a day for it to normalize.

u/RunNHyde13x · 1 pointr/microgrowery

Is there any way you can grab one of these?

Cigar Oasis Caliber IV Digital Hygromter by Western Humidor https://www.amazon.com/dp/B00JXOKQVW/ref=cm_sw_r_cp_apa_i_g2MVCbHDEQ8Q6

Throw it in your Mason jar with your herb. $20 well spent. I'm sure there's cheaper ones though.

u/AsianThunder · 1 pointr/cigars
u/_eidolon · 1 pointr/microgrowery

I'm guessing you're asking about a hygrometer, and not Boveda packs? Saw these recommended the other day and might grab some myself.

https://www.amazon.com/Cigar-Oasis-Caliber-Digital-Hygromter/dp/B00JXOKQVW/

u/CanadianAirsofter519 · 1 pointr/cigars

Plugging the hole is pretty easy. You can use pretty much anything you want. For mine I got those foam ear protection plugs. The ones you squeeze and then put into your ear and they conform to provide protection. I put two of those into the drain pipe, stuffed them in and then covered with a small layer of silicone. This way if for whatever reason I need to undo this it's just a little silicone on top and the foam ear things will just push out with a straw or something. You can even use tape...but for $5 for a tub of silicone is a no brainer when you will be storing potentially thousands of $$ of smokes. Why save a few cents now to loose many dollars later. But as I said, as long as it plugs the hole you will be fine.

Next for the hygrometer, I would recommend something such as :

https://www.amazon.com/Cigar-Oasis-Caliber-Digital-Hygromter/dp/B00JXOKQVW/ref=sr_1_10?ie=UTF8&qid=1538674709&sr=8-10&keywords=hygrometer

or

https://www.amazon.com/Inkbird-Thermometer-Hygrometer-Temperature-Humidity/dp/B0140UC9XQ/ref=sr_1_15?ie=UTF8&qid=1538674709&sr=8-15&keywords=hygrometer

​

Both will get the job done. Also get a couple, so you can put one on bottom and one on top shelves.

​

In my opinion there really isn't too much difference between the two. You will actually find a few companies with this "style" of meter. They just might have different button placements, but i'm almost 100% all of these are OEM'd by the same company in Asia and then they just do a few different touches (such as buttons, and placement) for different vendors. Either way, when ever you get a new hygrometer throw it into a ziploc with a Boveda overnight to confirm it is accurate. If it's within 1%RH (+/- 1) of the Boveda you are good to go.

​

​

u/CtxDude · 1 pointr/ecobee

Leave those at default...I'm no expert but I've never heard that and I've read enough HVAC forums I dream about ducts. What you DONT want is short cycling, but it's not gonna short cycle. Also your units gonna operate better and more efficiently the longer it runs..quick hits or short cycling don't reach peak efficiency.

Do you have a heat pump or actual AC and furnace? For instance I have 2 heat pumps. How old are your units? How old is the home? Filters changed recently? When was the last time they were checked out by a tech? How many units? Are you using the Ecobee remote sensors? Are you using follow me? What about comfort schedules?

Before I replaced our 24 year old units I'd have them checked and topped off with refrigerant every year.

One huge thing..order a very accurate temp/humidity gauge from Amazon and check how accurate your ecobee is. I ordered this one:Caliber IV Digital Hygromter by Western Humidor https://www.amazon.com/dp/B00JXOKQVW/ref=cm_sw_r_cp_api_cGQtzb1J5MR5B

One of my ecobees was 4 degrees off and the other 2.5 degrees off, and humidity was off for both of them. So when we had it set to 75 it's really cooling to 71 (or trying to).

I'm still chasing issues but I'm down to ductwork and just a leaky house. I'll say though, when it's 95 or so and 110 heat index like it was yesterday..if the units are properly sized and such they're pretty much gonna run all day. I bet mine didn't really start shutting down and cycling until 10pm last night.

u/vaderj · 1 pointr/3Dprinting

Then I suggest you purchase a hygrometer that is designed for a humidor and check it out.
I have 3 of these, one for my violin, viola, and one for my brewing room : http://www.amazon.com/Caliber-Digital-Hygromter-Western-Humidor/dp/B00JXOKQVW/ref=sr_1_3?ie=UTF8&qid=1413141387&sr=8-3&keywords=hygrometer

You will find that just because you don't see steam being released, does not mean that the humidity is not spiking.
The directions for verifying the calibration of those specific hygrometers involves putting salt inside of a small vessel (soda cap) and then adding water, and placing both the hygrometer and the salt/water mix in a sealed container (such as a rubbermaid lunch container or pyrex) - In a very short amount of time, the humidity will reach 75% and stay there (until the vessel is opened anyway)
If your espresso machine is completely empty and dried of all water, its possible then it may not increase the humidity in the immediate area, but there are many other factors involved as well (I live in western Oregon, so humidity is a constant issue for me)

u/kiwiposter · 1 pointr/NZTrees

If you've checked the trich's etc and she's ready, then cut her up and shake off each branch individually before hanging them on a clothes rack. Have a fan blowing in the room but not on them directly, one that oscillates is ideal. Leave for a couple weeks or so (depends hugely on room humidity), you're wanting them to sorta dry feeling on the outsides but not at the stage where the stems snap yet (any more than 70% RH is too wet). At this point you want to transfer them to glass jars and 'burp' them once a day (open the top so that the moisture can escape). You can buy some perfect humidity meters that you can put in the jar with them and know exactly when they're ready (you won't really need the meters after a few goes - you'll just recognise when it's ready). 55-60% RH is perfection, any wetter and it's unsafe to store (it'll mould), any drier and you've gone past ideal (it'll be harsh to smoke, and will stop curing so the acids in the plant matter won't be broken down into cannabinoids :( ).


The slower you cure it/the longer you have it between 60-65% RH, the better it'll be

u/Ash_Man · 1 pointr/cigars

I have two or three of these as I believe do other forum members. Both of mine we perfectly calibrated upon arrival.
Another sub member recommended these though I have no personal experience with them. I am thinking of getting a set so I dont have to open my wineador to check the RH.

u/BucketOfTruthiness · 1 pointr/microgrowery

I prefer the digital Caliber IV hygrometer. You can just pop it in the jar and as long as it's facing out, you can see the RH level so you know when you need to burp the jar and when it's time to close it back up.

u/eg133 · 1 pointr/cigars

I've personally never had that experience. What I like to use and what I recommend is the Caliber IV very accurate, inexpensive, and is able to be calibrated to adjust for RH percentage

u/MNG024 · 1 pointr/cigars

Makes sense. Just wondering then if I should toss another pack in or leave it?


https://www.amazon.com/Caliber-Digital-Hygromter-Western-Humidor/dp/B00JXOKQVW


That is the hygrometer I have.

u/Deqz · 1 pointr/snakes

Here is the new enclosure I have chose it has a raised bottom for heatmats, just looking for a heatmat now.

Equipment:

https://www.jollyes.co.uk/exo-terra-large-wide-terrarium.html

VE-100

https://www.amazon.co.uk/Caliber-IV-Digital-Hygrometer-Thermometer/dp/B00JXOKQVW

u/SuperHighRockies · 1 pointr/microgrowery
u/entgardener · 1 pointr/entwives

For curing you have to watch it like a hawk. And even though they are about $20 a piece I cannot recommend enough, a hygrometer.

My husband does our cure but I've helped him do it so I'll tell you what he does. First we wet trim, removing the sun leaves and leaving the buds on the stems. Then we dry on a drying rack until they don't feel wet and flimsy anymore. They still feel moist but not all floppy. Then they go into jars. This is when we remove the buds from the stems. We don't leave giant buds in the jars. We cut the buds into manageable pieces. If you leave big buds you can get mold. We don't fill the jars any more full than 3/4. Then we close the jars, put a hygrometer in there and wait for the rH to come up.

This is where the opening and closing the jars part starts. Depending on what the rH comes up to we leave the jars open for a number of hours. If it comes up above 80 we remove the cannabis and let it sit out on a plate to dry some more. Leaving it out for about an hour or two then putting it back in the jar and getting it below 80 again. This can take a few tries. Eventually they get to stay in the jars and it's a game to open them and close them a million times until they sit at 62. To get there we'll check on them about 4 times throughout the day and then leave them closed overnights for about 8 hours. When they hit 62-65 we'll throw in boveda packs.

There's an excellent guide here: http://www.rollitup.org/t/if-your-about-to-cure-then-you-gotta-read-this.369616/

Here are the rH meters we use: http://www.amazon.com/Caliber-Digital-Hygromter-Western-Humidor/dp/B00JXOKQVW/ref=sr_1_3/182-0076901-6915671?ie=UTF8&qid=1462892176&sr=8-3&keywords=hygrometer

and here are bovedas : http://www.amazon.com/Boveda-2-Way-Humidity-Control-Pack/dp/B00JV27MF4/ref=sr_1_2?ie=UTF8&qid=1462892206&sr=8-2&keywords=boveda+62