First comment:

Please upvote this by default so it stays towards the top. I'm still learning how2reddit

So I am NOT an artistic person so this is especially anxious for me. But, I needed something to keep my hands busy that wasn't masturbating, so here we are.

I have probably over studied techniques and materials, and I want this post to be a "documentary" if you will. Where someone who has no business painting is going to be doing just that.

So, I'll be documenting my pitfalls and approaches to everything here. With all of you lovely people, it'll also hopefully be a central location for someone like me or just wants to get into 40k can refer to.

Disclaimer: I'll be at work until 5pm EST. But my job is pretty cushy so I'll be adding planning details throughout the day

Tools and Such

Well, I probably overspent here. Only because I'm lazy and didn't want to make the drive to harbor freights. But then again, paying the premium to help support my local game shop is going to give me some karma in the long run. Here's the list of things that I ended up picking up:

• Wire Cutters
  
  • The game shop charged me $16 for them lmao. I hate myself. But they're used to cut the pieces out of the sprues. I was using a box cutter at first, and in no time I nicked myself pretty badly. Just buy them. Again, Harbor Freights.
    
• Box Cutter / Exacto Knife
  
  • I used it to trim off the excess from the sprues. The box cutter worked, but the exacto knife was a bit better because of the handle and the gradual width in the blade helps with control when you need it, or the finer point when you need to get into smaller areas.
    
• Paint Brushes
  
  • So, I spent a lot on one pair and then minimal on another. The A Lot pair was from the game stop ($16 for three types), I figured these would be much higher quality when dealing with the tiny pieces. I went to walmart and bought a set of 8 as well for $5. I'm intending to use these on things like terrain because they're larger in size and hiding issues from crappy brushes is going to be easier on terrain than it will be on a mini the size of 6 quarters.
    
• Filing tools
  
  • Honestly I'm not sure why these are needed. I thought it'd help get rid of the excess sprue on the models but it leaves a scratchy texture. I'm pissed about that. Unless someone here will tell me otherwise, just use your exacto knife
    
• PAAAINNTT
  
  • THIS IS THE BIGGEST THING I'LL FIRMLY PUT MY FOOT DOWN ON
    
  • If you're just starting out, DO NOT GO BUY THEM INDIVIDUALLY. Its too expensive. My local shop sells them for nearly $5-$8 a bottle. Buy THIS. Its a ton of typical colors and drops the individual price down to $2.80.
    
  • Paint sets are always going to be your best friend, from what I've found. Citadel paints for example are really expensive at my local shop (like $5-$7 each expensive) But something like this is a huge savor., bringing the unit price down to $3,63.
    
  • Shading seems to overhaul the look into something more professional, so you will want to buy two separately. My buddy suggested two different ones, Black and Brown.
    
• Wet Pallette
  
  • I am yet to have this conversation without the other person talking to me like they're running for president. Wet Pallettes are a necessity. They ensure you do not waste paint, keeps your paint consistently viable while using it, and helps with storing it. I've heard a couple of days, others say months. Who knows. I'm yet to start painting, but I'm just going to say don't even mess around and just get/build one.
    
  • Tabletop Minions has a great video to show you how to make one for the lo-lo.
    
• Mini Painting Holder
  
  • If you're not looking risk smudging the paint when you're holding your mini, then this is for you. Bonus points for reducing your chances of arthritis.
    
  • You COULD get something like THIS. But I feel that because it holds onto the sides, you can't really use it to paint the base.
    
  • What I ended up doing was buying 3 bottles of champagne, cutting off the top of one of them, and then gluing & duct taping it all together. I haven't tested out its balance yet but odds are, I'm going to have to do something so its stable and I can rest it on the table standing up without worry. Bonus, I was pretty drunk for a bit.
    
    

    Theory is Great and All (11.13.19)
    

    
    So here are my updates from actually painting.
    
    

• Mini Painting Holder
  
  • LOL. Welp. didn't turn out as expected. Glue didn't stick and I had to use so much duct tape that it looks like a toxic sushi roll. Yum. We'll see how it works when I get to the actually mini painting.
    
  • https://imgur.com/sU1bqxE
    
• Paaaaaint
  
  • Welp. I'm pretty sure I added too much water. I also definitely did not mix enough of it. I'm going for a deep green metallic look and only mixed enough for one coat..... lmao. Thankfully its just the 1st so I'm hoping when I mix a boatload of it, even if the hue is different, it won't matter much.
    
  • Wet pallete: Definitely worked out. Do it.
    
  • Because of the paint being too watery, you can see some spots where it pooled. Again, gonna take it easier on the water the second time around and hope it covers up the bad stuff
    
  • In being careful with the finer details, I didn't care too much. Some paint here and there won't change much and should be unnoticeable after a few more careful coats of the actual color I want to use, when I get there.
    
  • https://imgur.com/jiNNc1A
    
    

    Life Sucks and I haven't gotten much done (11/15/19)
    

    
    So I was only able to apply a second coat of to what I've already done. But honestly, not too shabby! Apparently I didn't water down the paint too much.
    
    https://imgur.com/gallery/lA9LV1N
    
    Also, I recently switched to a different cell phone carrier, and got a $200 prepaid card.... So I'm getting these.
    
    https://www.amazon.com/gp/product/B004INERK4/ref=ox_sc_act_title_1?smid=A3TMLEXVMVIW94&psc=1
    
    https://www.amazon.com/gp/product/B002JLVM5U/ref=ox_sc_act_title_3?smid=A1Y3PCPH3CY53X&psc=1
    
    There's a blog that I found (will have to find it again later) that recommended these.

Citadel makes a good producut. This is what I use for my Gunpla and bases for mini's.

https://www.amazon.com/Citadel-Paint-Shade-Nuln-Oil/dp/B0189BIERC

But really, just run a search for "black wash acrylic paint".

I should also mention nuln oil, also called "liquid talent," though I've never tried it myself.

Oh haha nope... tbh I lost his hammer launcher thing in a pile of parts somewhere.

Ol’ Ironhide has...
New weapons

New gap fillers

New stompy boots

Whole lot of this... ... and some of this

That thing needs a wash to darken it up and increase the grit.

​

https://www.amazon.com/Citadel-Paint-Shade-Nuln-Oil/dp/B0189BIERC

>black is fine I use citadels shade "nuln oil" this can make any paint job look 2x better

Can a black wash be used on any color? How do you use a black wash on a light-colored figure?

I see that the Citadel Shade Nuln Oil is $8.60, but I could get a batch of 8 Citadel washes for $34.50. Would you recommend the batch of washes, or is the black all I need for a beginner.

I also have the Army Painter Strong Tone Quick Shade that I have been using, but it is a pretty dirty shader, only good for all my zombies I think.

The gold standard.
Citadel Paint, Shade: Nuln Oil https://www.amazon.com/dp/B0189BIERC/ref=cm_sw_r_cp_api_i_5IbHDbN67N50H

I also have a wide selection of Army Painter washes that came with the complete set of paints.

Just use sparingly and have a dry brush handy to soak up any excess. You can always layer up!

https://www.amazon.com/dp/B0189BIERC?ref=yo_pop_ma_swf

I got back into painting after about a 25 year hiatus, and got the following:

this primer,

https://www.amazon.com/gp/product/B002BWORRW/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

this paint kit

https://www.amazon.com/gp/product/B07DWMTNDJ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

And this wash:

https://www.amazon.com/gp/product/B0189BIERC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Really happy with all these products.

Try to get some of those https://www.amazon.com/dp/B07H5SB4HB to fix the miniature on a champagne cork. Works perfect. Then use some grounding like https://www.amazon.com/dp/B07T2H1SBR.
Then paint the miniature and finish with some Nuln Oil like https://www.amazon.com/dp/B0189BIERC
That should help. Have fun!