Reddit Reddit reviews Comgrow Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and UL Certified Power Supply 220x220x250mm

We found 26 Reddit comments about Comgrow Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and UL Certified Power Supply 220x220x250mm. Here are the top ones, ranked by their Reddit score.

Industrial & Scientific
Additive Manufacturing Products
3D Printers
Comgrow Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and UL Certified Power Supply 220x220x250mm
REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service.
Check price on Amazon

26 Reddit comments about Comgrow Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and UL Certified Power Supply 220x220x250mm:

u/bogglingsnog · 9 pointsr/HalfLife

Although yeah 3d printing isn't the cheapest hobby, it doesn't have to be too pricey either. Unless you were aware of it already, I wanted to let you know you can get a decent printer these days and a set of tools and filament, at least enough to get started comfortably, for under $400 total. And if you are fortunate enough to have more cash than that, you can find your bang-for-buck scales pretty linearly above and beyond, there are many great printers out there for people of all income levels.

Back when I was in college, I paid ~$350 for just the printer kit I had to assemble, being able to buy a (mostly) assembled printer for just two-thirds the price that has over 8x the build volume and a heated bed is awesome.

It is a hobby that is accessible to almost anyone who can scrap together a one-time cash investment and has some spare desk space at home. It's very cheap to design and print small models, a single spool lasts quite awhile as long as you don't do anything too crazy. Although it's fair to say while it can be cheap to operate in dollars, it can be quite time expensive!

Not to mention if you're clever it can save you money in the long run if you use it to repair your stuff, although I wouldn't expect it to pay for itself right away unless you break things a lot :)

u/darkharlequin · 5 pointsr/ender3

Here's the rant

The fix, use Cura's "Pause at Height" plug-in, but after changing the filament home the printer before hitting resume.

No where does it say to do this, and in none of the tutorial videos does it say to do this. So simple, but no where is this ever mentioned or shown.


STL

u/CalculusWarrior · 5 pointsr/tumblr

They're surprisingly affordable; the Ender 3 is a great printer, for only $250. So long as you don't mind assembling it yourself.

u/circuitbreaker · 4 pointsr/ifiwonthelottery

Comgrow Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and UL Certified Power Supply 220x220x250mm https://www.amazon.com/dp/B07GYRQVYV/ref=cm_sw_r_cp_api_i_GB21Db61MBXR2

Good luck and thank you!

u/Sausage54 · 3 pointsr/3Dprinting

The Ender-3 and Ender-3 Pro are good budget first printers. I would advise to buy the Pro over the standard Ender 3 since it has a Mean Well UL Certified power supply, rather a generic one. If you can afford it.

Recommend to buy it from Amazon for good customer service or Banggood and Aliexpress if you want the best price.

Ender-3: https://www.amazon.com.au/Comgrow-Creality-Ender-Aluminum-220x220x250mm/dp/B07BR3F9N6/ref=sr_1_1?keywords=ender+3&qid=1573525773&sr=8-1

Ender-3 Pro: https://www.amazon.com.au/Comgrow-Creality-Printer-Upgrade-Certified/dp/B07GYRQVYV/ref=sr_1_3?keywords=ender+3+pro&qid=1573525812&sr=8-3

There are other printers in that price range such as the Anycubic i3 Mega, Anet A8 and the Monoprice Select Mini, the Ender 3 is the most popular and easily available in Australia.

> Also wanting to know other than a printer what would I need to start 3d printing. i.e. what sort of computer programs and other periferals

You will need to install a slicer on your computer, which will convert 3D models into instructions for your 3D printer. If you don't want to have your printer plugged into your computer while it is printing, your computer will need to have an sd card slot, if not purchase an adapter.

Highly recommend reading through the Getting Started guide for this subreddit.

Also here is a guide on how to build the Ender 3: https://www.youtube.com/watch?v=me8Qrwh907Q

And the Ender 3 Pro: https://www.youtube.com/watch?v=ibsOYzXduYc

Hope that helps

u/shootyscooty · 2 pointsr/3Dprinting

Hello all, just found this subreddit for the first time tonight!

Looking to order my first 3d printer.

I’m in the USA.

I can build a kit.

Honestly it will just be used to play around and make small prototype like parts.

Budget is around $300+-

I think I’ve narrowed it down to these two:

Creality Ender 3 Pro

https://www.amazon.com/gp/aw/d/B07GYRQVYV/ref=sspa_mw_detail_2?ie=UTF8&psc=1

Or

The AnyCubic Mega S

https://www.amazon.com/gp/aw/d/B07J9QGP7S/ref=sspa_mb_hqp_detail_mobile_aax_0?ie=UTF8&psc=1&smid=A1A5FQE7R5RISB



Any thoughts on the two of these for a newb.

I’m a tinkerer, and machinist, right now I own a Shapeoko CNC router, but have programmed and created many things over the years.

I appreciate the help!

I’d like to order tonight!

u/hobbyistmaker · 2 pointsr/ender3

[Here’s one](Comgrow Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and UL Certified Power Supply 220x220x250mm https://www.amazon.com/dp/B07GYRQVYV/ref=cm_sw_r_cp_api_i_EXX1DbYEDMC60) on Amazon that’s legitimate: https://www.amazon.com/dp/B07GYRQVYV/ref=cm_sw_r_cp_api_i_EXX1DbYEDMC60

u/mozershmozer · 2 pointsr/NoStupidQuestions

3d printing is a pretty niche process, but it has some incredibly cool applications. I use mine for printing custom parts for DIY projects, special items for Cosplay, and little minifigurines for tabletop games. They'll probably never replace injection molding, but for small scale projects they're fantastic.

As for the quality of the printers, it depends a lot on what you're talking about. Something like an Ender 3 is a great machine, both inexpensive and decent quality, but still essentially a hobbyist tool. More expensive brands like Makerbot do lots of little proprietary things to their machines to make them more capable of high quality prints, though in my experience you can usually get pretty close to professional using hobbyist machines as well.

Some printers are also just produced with higher quality parts, which makes them print better and operate more reliably, but still essentially are the same basic design as the cheaper versions. Compare the Ender I posted earlier to something like this which has a plastic frame. The plastic can warp and bend, leading to issues printing, wheras the ender has a metal frame which is more rigid. That simple change makes a huge difference in print quality, and other things like that can be done, from changing the extrusion method to using higher quality electronics, all of which changes the price and quality, but ultimately not how the printer actually "works".

u/GloriouslyUnderrated · 2 pointsr/3Dprinting

Hey everybody, I'm relatively new to the 3D printing scene as far as the printers themselves are concerned. I've been looking around for a sub $500 printer and I found the Creality Ender 3 Pro on Amazon for ~$260. Wanted to know if anyone has one and what they think of it or if there are suggestions for others.

Any feedback is helpful and much appreciated and the link to the printer is below. Thanks!

Creality Ender 3 Pro: https://www.amazon.com/dp/B07GYRQVYV/ref=cm_sw_r_cp_apa_i_0DEYCbVJH97DS

u/SinisterInfant · 2 pointsr/DMAcademy

Become your own source. Cut out the middle man. Destroy Unicron. Kill the Grand Poobah. Eliminate even the toughest stain.

The Ender 3 is $250. The Anycubic Photon is out there for $450 if you want higher quality for more trouble and messier process.

Welcome to the hobby. I like to use Hatchbox PLA. Your gonna want to check out r/PrintedMinis r/3Dprinting and I like 3D Printed Tabletop.

u/hartk1213 · 2 pointsr/Kayaking

They aren't much $ anymore..a printer that can print these padeyes just like this cost under $300 nowadays..the creality ender 3 is a great starter 3d printer

u/Wethesheeples · 1 pointr/ender3

I have changed out the nozzle and checked the filament, but I'm not sure what is wrong still. The print will come out initially, but barely. For reference, I am using the Ender3 Pro. (https://www.amazon.com/gp/product/B07GYRQVYV/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1)

Printing at 235 degrees for the nozzle, 75 for the bed. Adherence to the bed is fine so far, so I have that ruled out

u/Slyde01 · 1 pointr/MPSelectMiniOwners

this is the one im thinking of pulling the trigger on today. What do you think?

Worth it, or should i save some money and just woot it?

https://www.amazon.com/gp/product/B07GYRQVYV/ref=ox_sc_act_title_1?smid=A2ALB3RMNIRLH8&psc=1

u/valiantcrossbow · 1 pointr/3Dprinting

Hello everyone, I am currently in the market for my first 3D printer, and was hoping to get some advice on what printer would best fit my needs. I would like to spend no more than 300 USD max, and I live in Wisconsin in the United States. I am willing to build a printer from a kit, and I have limited electronics experience (though I am very willing to learn and my brother has a lot more experience). With the printer I would like to print a variety of things, such as pieces for props I am making, a lightsaber, probably some miniatures for DnD, and any other stupid things I can think of and design. I don’t really have any extenuating circumstances. Currently I am looking at 3 different printers, all around the same price:

Monoprice Maker Select V2: https://www.amazon.com/dp/B018GZBC3Y?tag=thewire06-20&linkCode=xm2&ascsubtag=AwEAAAAAAAAAARPY

Anycubic Photon: https://www.amazon.com/ANYCUBIC-Assembled-Innovation-Off-line-Printing/dp/B07TVW9HGH/ref=mp_s_a_1_1_sspa?adgrpid=61744442371&gclid=Cj0KCQiA-4nuBRCnARIsAHwyuPr9qUkHk3c-bjztvPtoPCnQfwmJiur43IW5Sqo_gLb2kfWEBrmndEMaAusvEALw_wcB&hvadid=274732107337&hvdev=m&hvlocphy=9018836&hvnetw=g&hvpos=1t2&hvqmt=e&hvrand=1205846483522208665&hvtargid=kwd-409136528305&hydadcr=21036_9428322&keywords=anycubic+photon&qid=1573068757&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFZUVVYT0NERzhRTFImZW5jcnlwdGVkSWQ9QTEwNDE5NjlRMUFTUlBNR1ZRNksmZW5jcnlwdGVkQWRJZD1BMDUzMDYwN1BBOEZWNFRKU01GVyZ3aWRnZXROYW1lPXNwX3Bob25lX3NlYXJjaF9hdGYmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl

Ender 3: https://www.amazon.com/Comgrow-Creality-Printer-Upgrade-Certified/dp/B07GYRQVYV/ref=mp_s_a_1_2_sspa?adgrpid=56791742355&gclid=Cj0KCQiA-4nuBRCnARIsAHwyuPpuBebDhMzsbSGWKX2y-Dq2wg37UXSEJqeqqEfB5I6zU-MDqdo4q8QaAiFfEALw_wcB&hvadid=274684426752&hvdev=m&hvlocphy=9018836&hvnetw=g&hvpos=1t3&hvqmt=e&hvrand=5031503050646445943&hvtargid=kwd-446200976551&hydadcr=14671_9484359&keywords=ender+3+3d+printer&qid=1573068855&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyNlJNRVZTSEVBVkdHJmVuY3J5cHRlZElkPUEwMDY2NTcxMVlVNjFBVExFSTZWUCZlbmNyeXB0ZWRBZElkPUExMDIzODY4V1BDMkY5UUpZR0NMJndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

I am open to other printers, these are just the ones that were on my radar, so feel free to suggest other options.

Thanks for the help and sorry for the long links!

u/Rudy_Greyrat · 1 pointr/3Dprinting

Looking to buy my own printer for whatever comes my way. I like to 3d print random stuff I make or things i find online from moving parts to figures. Was looking around amazon and saw this [Comgrow Creality Ender 3](Comgrow Creality Ender 3 3D Printer Aluminum DIY with Resume Print 220x220x250mm https://www.amazon.com/dp/B07BR3F9N6/ref=cm_sw_r_cp_apa_i_XxgODbQCRC3R1) but also found [this](Comgrow Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and UL Certified Power Supply 220x220x250mm https://www.amazon.com/dp/B07GYRQVYV/ref=cm_sw_r_cp_apa_i_GzgODbTQ6ZNAJ) which looks identical for a higher price. I don't see a difference. My budget would be around 300 to 400ish. I'm looking for one that'll either be enclosed or be easy enough to enclose since I'll be in a college dorm, so I don't want my roomate to be bothered by the smell if left alone. Any wireless features would be neat, but I'm fine with plugging my laptop and leaving it there. The more safety features or safer in general it is, the better.

u/gurgle528 · 1 pointr/3Dprinting

Budget: soft limit of $400, hard limit of $600

USA

Assembly is fine

Features needed: just looking for a general purpose printer. I'm a beginner so I'm not too picky. Looking at the Ender 3 Pro or the Prusa Mk3

​

https://www.amazon.com/dp/B07GYRQVYV/

Is this the right one? If not, where should I get it?

u/mr_britten · 1 pointr/ender3

I’m not sure about that one, but I just bought this one : https://www.amazon.com/Comgrow-Creality-Printer-Upgrade-Certified/dp/B07GYRQVYV 2 weeks ago and it has the 1.1.4 board, removable magnetic bed, it may have had thermal runaway protection out of the box, but I flashed the newest marlin firmware to get some other options, so I know I have it now.

u/Badbarista86 · 1 pointr/3Dprinting

I was originally going to buy an ender 3 as my first 3d printer. I have zero experience but after lurking here a bit I thought I knew what to buy. However amazon currently has some good deals on some of these printers. so my options are now:

Ender 3: $229.99

Monoprice Maker Select v2: 239.99

Ender 3 pro : $259.99

Monosprice Maker Select Plus: $289.99

​

I'm sort of leaning toward the Maker Select v2. But having no experience I'm hoping you guys will know better. I don't think building an Ender kit would be an issue, but for my first one I think Monoprices may be easier. I'm mostly looking to start with some minis and maybe randon little knick-knack type things. Although I think this may be something I get really into down the line, so as long as they're versatile I will probably build anything and everything I can :-p

u/MediocreBadGuy23 · 1 pointr/3Dprinting

Budget: $100-$300

Country: US

Kit: Sure, experienced with electronics and soldering

Uses: looking to print mechanical keyboard parts (cases, keycaps, etc) and anything else I might need to print parts for.

I'm currently looking at a few different printers and most are from Creality. The Ender 3 and Ender 3 pro specifically are what I'm going for. What's the best place to actually buy one though? There's a ton of different sites with different prices and it's pretty overwhelming.

There's the one from eBay supposedly direct from the seller for $237

Amazon from Comgrow (?) for $279

And straight from Creality (I think) for $259

I'm leaning towards buying directly from the seller because I've read some things about the warranty not being fulfilled directly from creality if you buy from another source.

Other ones I'm looking at are the da Vinci 1.0 pro, regular Ender 3, or any other really. Any help would be greatly appreciated.

u/arbos1 · 1 pointr/ValveIndex

I was just bout to post asking if this is good. Buy sounds like I need to check out ender.

https://www.amazon.com/dp/B07GYRQVYV/ref=cm_sw_r_sms_apa_i_2FYvDbH50QSX1

u/GreenAlchemistZero · 1 pointr/Petscop

Well if you ever end up with an extra 260 dollars you should consider getting the Ender 3 Pro.

https://www.amazon.com/Comgrow-Creality-Printer-Upgrade-Certified/dp/B07GYRQVYV

and if you run into problems the ender 3 subreddit is always there /r/ender3/

u/BishopsGhost · 1 pointr/3Dprinting

Comgrow Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and UL Certified Power Supply 220x220x250mm https://www.amazon.com/dp/B07GYRQVYV/ref=cm_sw_r_cp_api_i_T4WxDbRVFW44B

I have this one too

Official Creality Open Source CR-10 3D Printer All Metal Frame 12x12x15.5 Inch Build Volume and Heated Bed Includes Glass Bed https://www.amazon.com/dp/B07LG2K55Q/ref=cm_sw_r_cp_api_i_w5WxDbQ11Q2XH

Or cheaper

ADIMLab Gantry 3D Printer 90% Assembled 310X310X410 3D Printing Size with 24V15A Power Heat Bed Glass Control Box Filament Detector, Nozzle Light, Modifiable to Upgrade to Auto Leveling https://www.amazon.com/dp/B07CPQQ57D/ref=cm_sw_r_cp_api_i_r6WxDbR5B2PCQ

All pretty good units

u/Poopy_McTurdFace · 1 pointr/3Dprinting

Hey, my birthday is coming up in a couple of weeks and I was trying to think of something to ask for when a 3D printer crossed my mind. I've always thought they were pretty cool and I have a bunch of ideas for stupid little stuff to print out.

The only issue is that I know absolutely nothing about them and what I should be looking for in one or even if it's worth it for me to get one anyway. I don't mind having to put one together myself since it looks like that's the case with a lot of them after a quick Amazon search (very precise, I know).

My budget is under $300 and I'm in the US. I did find this one and it looks like it's pretty deece but want the experts to give me an educated opinion on it. [It's this one right here](https://www.amazon.com/Comgrow-Creality-Printer-Upgrade-Certified/dp/B07GYRQVYV?ref_=Oct_BSellerC_6066127011_1&pf_rd_p=471a90b9-8a34-5dd9-a6f0-17598d2f0fae&pf_rd_s=merchandised-search-6&pf_rd_t=101&pf_rd_i=6066127011&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=P83BAX28P3Y3BW4VJ6YZ&pf_rd_r=P83BAX28P3Y3BW4VJ6YZ&pf_rd_p=471a90b9-8a34-5dd9-a6f0-17598d2f0fae)

I just plan on using it to print out cool stuff others post online but may take a crack on designing my own stuff eventually. Nothing too big or fancy. Like I said before, I know what 3D printers are but that's about it, lol. I'm just hoping someone here can point me in the right direction.