Reddit Reddit reviews Command 17204-12ES 07248000796 CMND PIC HANG STRIP VP, 12 Pairs, White, Picture

We found 21 Reddit comments about Command 17204-12ES 07248000796 CMND PIC HANG STRIP VP, 12 Pairs, White, Picture. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Hardware
Picture Hanging Hardware
Command 17204-12ES 07248000796 CMND PIC HANG STRIP VP, 12 Pairs, White, Picture
INCLUDES 12 Pairs of Medium, White Command Picture Hanging Strips (24 Strips total); 4 Pairs hold 12 lbs. Maximum frame size of 18 inches x 24 inchesDAMAGE FREE DECORATING Say goodbye to holes, marks, or sticky residue on your walls; Command Picture Hanging Strips by 3M are easy to use and help keep your walls looking beautifulNO TOOLS REQUIRED Hang picture frames, wall art, mirrors, wall clocks, signs, dry erase boards, holiday decorations, acoustic foam boards, and other home decor where you want without nails or a hammerSTRONG AND VERSATILE Command Strips hold strongly on a variety of indoor surfaces including painted walls, finished wood (painted or varnished shiplap, cabinets, or doors), painted concrete cinder block, laminates, glass, tile, metal, and other smooth surfacesREMOVES CLEANLY Redecorate when inspiration strikes. These picture hangers leave no sticky adhesive behind. Perfect for your dorm, apartment, home, and office
Check price on Amazon

21 Reddit comments about Command 17204-12ES 07248000796 CMND PIC HANG STRIP VP, 12 Pairs, White, Picture:

u/MOEB74 · 10 pointsr/PSVR

Thanks! I just looked and I have some of the Velcro Command strips. These would be nice because you can move it from the wall to the TV so suit whatever you're playing better

https://www.amazon.com/Command-Picture-Hanging-12-Pairs-17204-12ES/dp/B00LW1APOC/ref=sr_1_2?ie=UTF8&qid=1520093463&sr=8-2&keywords=velcro+command+strips

u/keithsweatshirt_ · 6 pointsr/PSVR

I've been using the same on the bezel of my TV. You must be using the 3M Command strips too? They're excellent!

https://www.amazon.com/dp/B00LW1APOC/

u/Avridt · 4 pointsr/dogs

You can get a piece of plexi glass cut to whatever size you want at some hardware stores (you can also get a cheap poster frame and use the acrylic from that too as a cheaper alternative). You can use those [Command Velcro strips] (https://www.amazon.com/dp/B00LW1APOC/ref=cm_sw_r_cp_api_LNzqybVAJGPHV) to attach it to the wall so it's easy to remove for clean up.

u/boom_rs7 · 4 pointsr/battlestations

Using the glue and shit people use, absolutely, however I use these which hang them up with no issues and will not ruin the walls: https://www.amazon.com/Command-Picture-Hanging-12-Pairs-17204-12ES/dp/B00LW1APOC/ref=sr_1_2?ie=UTF8&qid=1496467845&sr=8-2&keywords=3m+command+strips

u/yznbrgr · 4 pointsr/travel

I fly long flights pretty often and also prefer to use my iPad in place of the crappy seat-back screen.

I use Command Strips Velco on almost all my long flights. Two of them will hold the iPad pro the entire flight. They're super lightweight and pretty affordable for what they do.

Make sure to wait until after take off. And I always try to mount the iPad when the flight attendants aren't looking. The strips do absolutely no harm but I just don't want to get into a debate. Make sure you remove them after the flight. I'd hate for this hack to get squashed.

u/cleansweep9 · 3 pointsr/homeautomation

So you want the other lamps to turn on when you turn on the switched outlet?

The sarcastic answer is: extension cords.

Non-sarcastic, I'm not aware of any consumer RF product that detects when an outlet turns on and sends out a signal to other smart plugs to also turn on.

I think the closest thing you'll find at the budget you're talking about are these Etekcity wireless wall plugs. I would forget about the switched outlet, and just use command strips to stick the remotes at locations you like, so all the lamps can be controlled by the remotes.

u/Not_A_Red_Stapler · 3 pointsr/declutter

Maybe these would be better for you then putting holes in the wall?

https://www.amazon.com/Command-Picture-Hanging-12-Strips-17204-12ES/dp/B00LW1APOC

https://www.amazon.com/Command-Damage-Picture-Hanging-Strips/dp/B00404YKZI

https://www.amazon.com/Command-Picture-Hanging-Strips-Pack/dp/B0044SBCT2

(There are lots of other variations on this theme.)

I've noticed Costco also has these, if you have a membership you should check there.

I can totally relate to the reluctance to put holes in your wall. (Maybe that's not the issue, but if it is...)

u/michrech · 2 pointsr/HomeNetworking

Don't drill holes. Routers, modems, and many smaller switches are light enough that you can use 3M Command picture hanging strips. This is what I did with most of my equipment, and it's been hanging there for six months now with zero issues. Plus, you can pull them off the wall and move them around without making more holes. This is especially excellent if you're renting. :)

u/Spurlz · 2 pointsr/oculus

Fully agreed - I had similar issues until I 'mounted' my 3 sensors a bit higher.

You can just use 3M Velcro strips and either of the mounts from Amazon below:

3M Velcro strips


White stationary mount


Tripod mount


The nice thing about 3M Velcro strips is they hold tight, but are easy to remove when needed without leaving any marks or residue on the wall :)

u/slam_bike · 2 pointsr/oculus

I'm sure what you've got there will work, but someone recommended these a few months back and I've been using them ever since. Has held up my one ceiling mounted camera since sometime last December!

u/MorganAKilla · 2 pointsr/interiordecorating

The 3M Velcro strips are seriously magic. I used them in all of my apartments over the years.

https://www.amazon.com/Command-Picture-Hanging-12-Strips-17204-12ES/dp/B00LW1APOC/ref=sr_1_1?ie=UTF8&qid=1488025692&sr=8-1&keywords=3m+velcro+hanging+strips

Edit: Amazon link for reference

u/Nalin8 · 1 pointr/oculus

This is what I use, and it works perfectly amazing:

Velcro Command Strips (3 lb holding limit):
https://www.amazon.com/gp/product/B00LW1APOC/

Super lightweight plastic mounts:
https://www.amazon.com/gp/product/B00DWA0QLS/

Put a strip on the wall and a strip on the mount, screw the camera head into the mount, and stick it to the wall. Holds perfectly fine. I've never had it fall off or had any problem.

u/Swankster86 · 1 pointr/DIY

I used command velcro to hang things all the time. I also used them to keep the cabinets shut to keep the cat out of them.

It's the spike end of velcro interlocking to another spike end, pretty secure and it comes off without messing up the wall. Use a little heat if you cut it down to size and get rid of the tab for removal.
https://www.amazon.com/gp/aw/d/B00LW1APOC/ref=pd_aw_sim_sbs_229_3?ie=UTF8&psc=1&refRID=CH6GRZRKBD7C75HGYJVY&dpPl=1&dpID=81m5B9T6htL

Sorry about formatting. On mobile

u/honeyfage · 1 pointr/oculus

I use these mounts with command strips for my sensors. Two strips per mount and they seem very stable

u/jobu01 · 1 pointr/InteriorDesign

If you have some basic wiring skills, you could use LED lights like some mentioned. I went this route connected to a remote controlled outlet and it works great. I like the light bars since you can reuse them later more easily than taping plain LED light strips onto the underside directly.

Some cheap lights if you're patient and willing to give AliExpress a try: LED Light strip bars, 12V driver (it also works for 120V), sticky strips, wireless outlet and/or switched cord.

u/lonelliott · 1 pointr/lifehacks

I just use my cheapo deapo laser level and a ruler. To each their own though.

Edit: Command strips are the way to go. They can be used to hang just about anything. The velcro strips can hold up to 16 pounds with 2 of them on a picture or item. Most everything even close to 16 pounds or under in my house is command strip hung. No need at all for putting holes in the drywall.

https://www.amazon.com/Command-Picture-Hanging-12-Pairs-17204-12ES/dp/B00LW1APOC - no affiliate link

u/TransientBananaBread · 1 pointr/buildapc

I'm assuming you mean wires outside the case and not inside.

I picked up a bag of adhesive cable clips for a few bucks. Definitely helpful for routing wires around or under a desk. These are what I bought, but there are lots of different ones you can looks through.

Velcro ties also come in handy frequently and they are adjustable/reusable. You can also use them for cable management inside your case.

I also use Command Strips to position my router and surge protector on the wall, but that's a personal preference.

u/madison7 · 1 pointr/NEU

these will do the job

u/DeadBeatRedditer · 1 pointr/battlestations

As an alternative to velcro you could use these.

u/cruel_angel · 0 pointsr/hometheater

3M Command strips will handle it. They have ones that can handle 10 pounds. I had my home made projector screen mounted on the wall using these.

https://www.amazon.com/Command-Picture-Hanging-12-Pairs-17204-12ES/dp/B00LW1APOC?th=1&psc=1