Reddit reviews Crazepony RunCam Swift 600TVL FPV Camera 2.8mm Lens OSD DC 5-17V
We found 2 Reddit comments about Crazepony RunCam Swift 600TVL FPV Camera 2.8mm Lens OSD DC 5-17V. Here are the top ones, ranked by their Reddit score.
Only weight 12g (with case)This is the RunCam SWIFT FPV CAMERA with IR Blocked, the luminous effect is betterSupport 2S, 3S, 4S battery (DC 5 to 17V) Wide voltage Power inputThe board size is reduced to 26*26mm, which can reduce air resistance for FPV aircraftIt is suitable for fixed-wing aircraft and Multirotor like QAV250, which are highly required in voltage and weight.
Assuming you picked up one of these:
https://www.amazon.com/Eachine-700TVL-Degree-Camera-Transmission/dp/B00WJFKXS8
That video transmitter outputs unfiltered (bad) 5v (good) to the camera. You can add an LC filter later if you notice bad signal when adding throttle.
LC Filter: https://www.amazon.com//dp/B018X744TO/
Note that cmos cameras generally have trouble with detail in changing light conditions. Since you are getting 5v out, you can easily upgrade this later to a much nicer ccd camera (though you might need to solder some wires together).
The gold standard of fpv cameras is the hs1177, this one is my favorite:
https://www.amazon.com/gp/product/B01E6GPYS6/
You have a good working setup though, I would only upgrade as you go
https://www.amazon.com/dp/B01N9E33XA/ref=cm_sw_r_cp_api_FJM6ybRDZN741
This is the camera that most people are putting on tiny whoops(really small drones). I've used this exact one, and it works pretty good. It will only give you about 50 ft of range though.
If you are looking for more range, you will have the buy a camera and a transmitter, such as these two:
https://www.amazon.com/dp/B01N948FF7/ref=cm_sw_r_cp_api_xMM6ybVKT9E49
https://www.amazon.com/dp/B01E6GPYS6/ref=cm_sw_r_cp_api_wNM6ybJQT95DW
EDIT: you would also need a recover for the video.
https://www.amazon.com/dp/B01H36AIGY/ref=cm_sw_r_cp_api_6PM6ybWV3Y0EJ
This puts out RCA to a monitor of your choice