Reddit reviews da Vinci Travel Series 1503 Maestro Watercolor Brush, Round Kolinsky Red Sable with Pocket Case Handle, Size 1

> When moving a unit along their movement value'd distance, do you usually measure out the lead model, move it, and then move each other model in the unit in approximately the same (but not measured) distance to maintain coherency, or do you measure out each individual model in a unit to ensure not a single one possibly goes further than its value? Or is this something agreed upon by the players pre-match?

> If each model is measured, I could see some units (ie, conscript squads) being extremely time-consuming or difficult to deal with depending on terrain and model count.

Officially, each model. However almost everyone I've ever played with does it the "time saving way" when dealing with large groups of models. This usually isn't a problem when you are clearly moving them less than max movement range. This is especially the case with horde units that have greater than 10 models to a unit. 20x Poxwalkers for instance. Once you get used to playing, it isn't too time consuming for a single 5 model Marine squad.

> On the second question, is there a generally agreed upon "kit" or set of paint brushes to get before starting to paint models? In addition to the First Strike box I got last night, I also got the small Painting Essentials box which includes a brush (along with cutter, glue, and some small pots), but wasn't sure what other brushes I might need/want before starting to paint.

The "goto" kit for brushes tends to be a Winsor and Newton Series 7 Round Size #2 and #0. Keep them clean with Master's Brush soap and they'll last you a long time. You can find them on Amazon. At $10-$15 a brush they aren't cheap when starting out. And that's arguably more then you need for a first model. You can get by with a cheap bag of small "gold taklon" brushes from walmart or similar at first.

Here's something I wrote recently on brushes for someone else looking for some nicer brushes....

https://www.reddit.com/r/deathguard40k/comments/8ac9ui/what_warhammer_brushes_should_i_get_what_vallejo/

As for Army Painter brushes specifically. It's what I started with before moving to Kolinsky Hair brushes. Still use a number of their small dry brushes for small detail dry brushing. If you are set on Army Painter... The Wargamer series, specifically the Regiment, Character, and Detail brushes are pretty solid. As well as the Wargamer Small Drybrush. Certainly better than Walmart synthetics. Have held up well cleaning with Masters Brush Soap linked below. They just have never had the same type of fine tip you get on a Kolinsky. The super small Army Painter brushes aren't really worth it though in the long run.

-----------------

I have a large collection of brushes with my better half. Bought her a large collection from different brands from around the world so she could try different styles to find the perfect brush for her.

Essentially, you'll want a Natural Kolinsky fiber brush in round shape for miniature base coating, shading, layering, edging and detail work. They will last you quite a while if you take care of them. Most people find they can do everything with a #2 and #0. A workhorse and a detail brush. Good natural Kolinsky hair helps thinned paint flow properly out of the brush, and holds an excellent point. There are a number of options to get a good Kolinsky brush:

As for brands, you have options:

• Winsor and Newton Series 7. Well known for quality and value among miniature painters. This is the gauge by which other high end brushes are judged. - #2, #0
  
• da Vinci. A little more but you can get a nice Travel Series for similar money to their traditional handled brushes. Helps protect the tip while in storage or traveling to the store to paint. They run a little smaller/thinner than W&N Series 7. - #2, #1. This is always the first brush my better half reaches for, if she's not feeling it that day though she'll pull just about any other Kolinsky brush from her collection.
  
• On the cheaper side is ZEM. Had very good luck with them. Good companion for the W&N7 as I use ZEMs when painting metallics as they can be a bit rougher on brushes. They do have some ware to them after dozens of models compared to the more expensive W&N or da Vinci. But don't need to be thrown in the trash like the cheap synthetics. Brush soap does wonders. Set of size #10/0, #0, #2, & #4. Or Individually. These tend to be the first brush I reach for... since I gave the other brushes as a gift. I try to stay to my cheap brushes... If I'm not feeling it that day then I will grab a W&N7.
  
• Other Brands of Kolinsky fiber brushes I own but don't have as much experience with... Raphael, Escoda, Connoisseur.
  
• There's also Citadel's own Artificer line... They are also Kolinsky fiber brushes so need to be cleaned regularly. I have not tried them but many suggest they are similar quality as the W&N Series 7. Just a little more expensive.
  
• When friends come over to learn how to paint up thier board game or DnD minis... I hand them a pouch an assortment of Army Painter Wargamer Brushes or Winsor and Newton synthetic Cotman so they don't need to learn on walmart brushes, but don't risk our Kolinskys.
  
  Then you'll want to keep it all clean with "The Masters" Brush Soap and Conditioner. Cleaning regularly will make a big difference brush life. https://www.amazon.com/dp/B0009RRT9Y/ ... Keeping brushes freshly rinsed in a basin can help prevent the bad buildup of dried paint to begin with. This kind of thing... https://www.amazon.com/Loew-Cornell-Brush-Tub-II/dp/B0019IKYU8/ or really any sturdy cup you have around that won't tip over easily.
  
  NOTE - You'll want to use cheaper brushes for Drybrushing, it can just murder brushes. Either walmart/craft store brushes you can toss, or just cheaper quality brushes made for it, like Army Painter or Citadels drybrush lines.
  
  As for paint... I use Army Painter and Citadel. Citadel primarily for anything warhammer to get color matches. Army painter for some washes, and anything else I paint (boardgame and DnD minis). Rither now I are only using Vallejo for Airbrush paints and a few premium metallics.
  
  -----------------
  
  There's a great guide that got me and my other half started over on the /r/minipainting subreddit. https://www.reddit.com/r/minipainting/comments/50hd3a/rminipainting_buying_guide_hd_remastered/