Reddit Reddit reviews DampRid Fragrance Free Moisture Absorber 4 lb. Hi-Capacity Bucket - For Fresher, Cleaner Air in Large Spaces

We found 42 Reddit comments about DampRid Fragrance Free Moisture Absorber 4 lb. Hi-Capacity Bucket - For Fresher, Cleaner Air in Large Spaces. Here are the top ones, ranked by their Reddit score.

Home & Kitchen
Dehumidifiers
Heating, Cooling & Air Quality
DampRid Fragrance Free Moisture Absorber 4 lb. Hi-Capacity Bucket - For Fresher, Cleaner Air in Large Spaces
DampRid Hi-Capacity Moisture Absorber Bucket attracts and traps excess moisture, eliminating musty odors from damp areas.The hi-capacity design features a unique Moisture Lock spill resistor technology with a sealed safety cover for a mess free solution.Ideal for larger spaces like basements, garages, where stagnant air and excess moisture is a problem.The 4 lb. Hi-Capacity bucket lasts up to 6 months, depending on temperature and humidity levels.To use, remove the plastic lid exposing the sealed safety cover. Discard once the moisture absorbing crystals have fully dissolved.Protect large problem areas from moisture damageUse in basements, crawlspaces, garages, storage rooms, vacation homes, boats & RV’sEliminate musty odors caused by excess moistureAttract and trap excess moisture in your spaceSpill resistant safety cover
Check price on Amazon

42 Reddit comments about DampRid Fragrance Free Moisture Absorber 4 lb. Hi-Capacity Bucket - For Fresher, Cleaner Air in Large Spaces:

u/dildusmaximus · 12 pointsr/Mushrooms

I don't have an ID for you, but if they are growing in your house, that probably means the mycelium is eating the wood in the walls/floor. This is bad for many reasons, main one being your house is literally rotting away. Get some bleach/lysol/any heavy duty disinfectant, and clean the area very well. Soak it If you have too. If you don't have one already, it'll be a good idea to get a dehumidifier and leave it running for a few days to completely dry out the area. After that, keep a boat size tub of damprid in there to help prevent moisture in the walls again. If they keep growing, you'll need to get a professional to rip out all the rotten wood and replace it all. This will be expensive. Try not to let it get that bad.
Best of luck!

u/aceinthehole001 · 5 pointsr/4Runner

At a minumum I would: Buy multiple 4lb buckets of Damp-rid (https://www.amazon.com/DampRid-FG50T-Hi-Capacity-Moisture-Absorber/dp/B0029EGUNG). Make sure all interior vents are closed and set to recirculated air. Each day pour some fresh Damp-rid into a large 5 gal bucket placed in the vehicle, then seal all the doors and windows and let the vehicle sit. Every 24 hours, open vehicle, dump out bucket, and repeat. I wouldn't stop until it wasn't collecting any noticable liquid anymore. I suggest being careful to never leave the vehicle parked with any windows open, and continue to keep a Damp-rid in the vehicle indefinitely in attempt to continue to combat mold growth, especially if you live in a high humidity area.

u/MoJoSto · 4 pointsr/askscience

you might also try Glycerol, but that's likely about the same viscosity as Mineral Oil. I think in terms of low volatility and still bacteria resistant, ethylene glycol (antifreeze, with or without water) would be your best bet.

You may also be able to try doping your water with a salt to keep it from evaporating. Fully saturated Calcium Chloride won't evaporate (the calcium chloride actively draws water from the atmopshere). It almost certainly wouldn't grow anything, though as a downside, if its flowing, salt crystals may creep out of the solution on to the walls of your container (especially if its really concentrated).

u/robokitteh · 4 pointsr/NewsofSeattle

Maybe something like this?

u/furryatp · 3 pointsr/e46

Have you ever replaced a window regulator? If so, the vapor barrier might have not been re-adhered properly. That's what keeps rain out of the car. I had this issue in my car. Check each foot well after rain to see if the carpets damp.

As for drying it out, I got a bucket of rv dessicant and left it in the back for 6 months or so. That seemed to work.

u/FortyandLifeToGo · 3 pointsr/priusdwellers

I have rain guards and crack the windows.

​

I also have this in the back of the car

u/wintyfresh · 3 pointsr/GoRVing

Sounds like a nice setup! I pressure wash my trailer at the end of the season to get the dirt off and clean the gutters before the torrential summer rains the SoCal deserts see. If you're leaving it for long stretches some bug and moisture protection is probably a wise investment.

u/bearcatbanana · 3 pointsr/Advice

I will say, the bugs are the obvious thing to bother you in a basement apartment but you should really be in the look out for dampness. I would get some of these too: damprid works great

u/astralrayn · 2 pointsr/MakeupAddiction

I've seen stuff like this for whole closets but keep in mind I've never personally used them so I'm not sure how good they are! You could also look into a dehumidifier but those are much more spendy.

u/riera90 · 2 pointsr/pcmasterrace

If it doesn't smeel or look burn it should be ok, just don't turn it on, unplugg the cord and battery (of the motherboard), doing that is just metal and pcb, let it dry, if you have dehumidifiers
(https://www.amazon.com/DampRid-FG50T-Hi-Capacity-Moisture-Absorber/dp/B0029EGUNG/ref=sr_1_5?s=home-garden&ie=UTF8&qid=1501770667&sr=1-5&keywords=dehumidifiers&refinements=p_36%3A1253523011)
get some near the pc (not inside, as it has quemicals that could damage the pcb's and conections) with the sidepanel open, also get the hard drives out, the water shoundn't be able to get inside them, but the humidity of the case could destroy them,
the same goes for diskdrives.
A good idea would be to disasembly the psu to make sure it dryes properly, and get the motherboard out of the case for the same reason (for the back part of it) (and personaly I would disconect ram, pci boards and cpu).

Be patient and everything would be ok, (sometimes I wash pc's with water and to the time no one broke to me for that).

After it dryes up the only damage would be the wiped bios configuration, witch you would need to configure again.

Excuse my broken english, not my mother tongle.

Good luck.

Edit: It would be a good idea to check the psu later with a multimeter.

Edit 2: If the water that felt on the pc was dirty maybe you want to wash it with a gentle stream of clean water (distilled water at best)

u/hiyosilver64 · 2 pointsr/findareddit

I would suggest replacing the door to the closet with one that has slats to provide better air circulation --- also you can use a product called Damp-Rid --


https://www.amazon.com/DampRid-FG50T-Hi-Capacity-Moisture-Absorber/dp/B0029EGUNG

u/jfalc0n · 2 pointsr/Vive

My only thought (and I'm going to try this myself) is perhaps to get a large plastic container which will fit both the Vive Headset and container of Damp-Rid to keep out the moisture.

Yes, condensation is going to be a factor if you don't take steps to keep it dry in cold weather.

u/mightyprometheus · 2 pointsr/oneplus

You could try dumping it in something like this for a day or two.

u/scotch_please · 2 pointsr/HomeImprovement

I've been meaning to try DampRid for a room with a similar issue. I haven't yet so I can't tell you how well the stuff works but maybe you can test it out in one of the smellier rooms.

Unfortunately this won't solve the core issue but might help until you can get the specialist in.

u/-sub · 2 pointsr/shrooms

Don't take the lid off. Can you put a fan inside the closet on the floor facing away from the sfgc on the lowest setting?

Evaporation triggers the growth of pins and a good indicator that you're lacking FAE is "fuzzy feet" (it looks like fluffy growth on the base of the stipe growing upwards) -- if you have more than a half inch of fuzzy feet, u need more FAE.


rice is a bad idea. it doesn't work for phones and it's an urban myth. don't do that either. your best and most inexpensive bet is to construct a desiccant chamber and couple that with a fan if possible.

here's a desiccant product u can get online or at lowes/home depot/walmart and some more information about using dessicants for drying

good luck.

u/mtldude1967 · 2 pointsr/canadaguns

I use DampRid. Put it in your locker/safe, it absorbs moisture, you just have to change it every couple of weeks. Also, keep your guns oiled.

u/gotbock · 2 pointsr/preppers

DampRid FG50T Hi-Capacity Moisture Absorber, 4-Pound Tub https://www.amazon.com/dp/B0029EGUNG/ref=cm_sw_r_other_apa_3l0qxbP2381R0

u/rlaptop7 · 2 pointsr/3Dprinting

Sticking it in a oven you can run at 105C for 8 hours is a great way.

Otherwise, you could build a descant bag. forget using rice, it doesn't work terribly well.

You can use descants based on calcium chloride.

The stuff is available retail as a product called "damp-rid"

http://www.amazon.com/DampRid-FG50T-Hi-Capacity-Moisture-Absorber/dp/B0029EGUNG

Put it in a rather air-tight box with the descant device in the box. It may take days to dry the pla well.

Place a small fan in the box to circulate the air to speed things up.

Best of luck.

u/BajingoWhisperer · 1 pointr/Miata

My car gets like that if I leave it sit a week or two. I put one of these in the car last winter car was definitely drier but I also put a new top on last year.

u/throwaway73028 · 1 pointr/shrooms

Thanks a lot!!! I was really unsure of which of the two to get, but Damprid seems to be more popular. And I do plan on fanning for 2 days beforehand.

One more question, I plan on getting this size: http://www.amazon.com/gp/aw/d/B0029EGUNG/ref=mp_s_a_1_1?qid=1415820236&sr=8-1&pi=SY200_QL40 Is this enough or too much for the shrooms I'll get from 5 cakes using PF Tek (after fanning that is)?

u/sparklekitteh · 1 pointr/lifehacks

Damp-Rid is great stuff! We leave a tub in the bathroom behind the toilet and it sucks all the moisture out of the air.

https://www.amazon.com/DampRid-FG50T-Hi-Capacity-Moisture-Absorber/dp/B0029EGUNG

u/Ear_Bud · 1 pointr/microgrowery

You can try Damp Rid

u/gx1400 · 1 pointr/Homebrewing

I had condensation issues until I found a huge leak in my lid. I bought and still use this: Damp rid although it's not an issue anymore, I keep it in there to be safe.

u/bobroberts1954 · 1 pointr/Cartalk

Sop the water out and check it any time it rains. Get several pails of desicant to start sucking up the moisture. You can find such in the paint section and you can recharge it in your oven if funds are tight. That should hold till the shop is ready, it's probably something simple like the trunk gasket.

u/Scribbles2539 · 1 pointr/peacecorps

Can you get the little dehumidifers, that have the little balls in them? Kind of like this We could find them in pretty much any store in our city, it helps.

u/skratchx · 1 pointr/Homebrewing

Let me know if you figure out how the hell to put a collar on this thing. I've got the same exact unit. Also, make sure you get something to keep the moisture down in there, you get a ton of condensation when it doesn't go down to freezer temperature. I picked up some Damprid and it works alright.

u/vorin · 1 pointr/cars

I'm no pro, but if it were mine, I'd grab some DampRid stuff to dry it out, then I'd rent a RugDoctor with upholstery tool to do a hot water extraction.

u/id000001 · 1 pointr/vandwellers

If you are worry about moisture I would just use one of those http://www.amazon.com/DampRid-FG50T-Hi-Capacity-Moisture-Absorber/dp/B0029EGUNG

u/Fleuramie · 1 pointr/WTF

Wow we usually wash the sheets about every 4 weeks. You must have some major moisture! You need some Damp-Rid. http://www.amazon.com/DampRid-FG50T-Hi-Capacity-Moisture-Absorber/dp/B0029EGUNG/ref=sr_1_3?ie=UTF8&qid=1404582205&sr=8-3&keywords=damp+rid

u/wdjm · 1 pointr/DIY

Get a dehumidifier and/or find the water leaks. Even something like this would likely help.

u/neuromonkey · 1 pointr/photography

Hm. LOTS of DampRid in your lens cases and camera bag. Possibly someone makes a version with antifungal stuff in it? Hm.

I would ask a couple of pro photographers... HEY! I know a pro photographer who worked in Bali for a couple of years. I'll ask him.

u/TomClem · 1 pointr/beer
u/HopNoxious · 1 pointr/Homebrewing

I live in Idaho where we see occasional sub-zero temperatures in the winter. I have both a fridge-turned-kegerator and a chest-freezer-turned-fermentation-chamber in my detached garage.

For my kegerator, which I keep at 42°F, I've installed a 75w incandescent light bulb at the base of the fridge which I leave running constantly any time the average temps are below my target temp. Basically I just screw the bulb in between September and May.

The fermentation chamber is a little more tricky. For this I have the STC-1000 wired for dual stage. The heating stage has a small ceramic space heater plugged in to it which sits inside on the freezer's compressor hump.

Temperature control aside, you might run into some issues with dampness and mold. Supposedly DampRid does a good job of controlling this.

u/Bassflow · 1 pointr/lifehacks

Get damp rid. $10 should last about 6 months.

DampRid FG50T Hi-Capacity Moisture Absorber, 4-Pound Tub https://www.amazon.com/dp/B0029EGUNG/ref=cm_sw_r_cp_apa_IvfFybNAGF8V6

u/Greeneee- · 0 pointsr/vandwellers

Desiccant packs or a diesel heater.

You can dry desiccant packs in an oven or microwave to reuse them. A dutch oven on propane might work too.