Reddit reviews Dash Cam Mirror Mount Kit for Rexing V1,Falcon F170,Z-Edge,Old Shark,YI,Kdlinks X1,VANTRUE and Most Dash Camera and Car Camera

what is the law on "right to record" in your place of existence?

if its legal to record someone without consent, i would get the cheapest security camera or dash cam and have it set up in the room. out of his sight and have it record 24/7 and just overwrite itself. then when an outburst happens, you have evidence

if i was you, i would buy https://www.amazon.com/Dash-Cam-Mirror-Mount-KDLINKS/dp/B0102CK1BS/ (It will run off of a usb wall brick) and whatever the cheapest 16gb sd card you can find is. so you will probably be in it for about $16.

The Youtube video has been stabilized, but otherwise hasn't been altered.

At the time, the wirecutter review of dashcams liked the G1W the best. I bought this one from eBay for $45 with free shipping from China.

When it arrived the suction cup mount was defective. It was only $45 so I didn't bother reporting it as arriving damaged. Instead I bought this rear-view mirror mounting kit from Amazon for $12.

I also bought this 12 volt to USB power converter from Amazon for $8 so I could hard wire it into the car power. My rear-view mirror has switched 12 volts on it which I tapped into for camera power.

I used a normal microSD card for a while but it died pretty quickly due to the constant writing. I bought this heavy duty 16GB card for $11 on amazon.com and it's been working great for the last 9 months.

Pretty cheap insurance if you ask me. If I had it to do over again I would buy the version of the G1W that uses a capacitor instead of an internal battery or I would try out one of the cameras that the wirecutter now is suggesting.

Enjoy!

Dash Cam Mirror Mount - Fits Falcon F170HD,Rexing V1, Z-Edge, Old Shark, YI, Amebay,KDLINKS X1,VANTRUE and Most Other Dash Cameras https://www.amazon.com/dp/B0102CK1BS/ref=cm_sw_r_cp_api_R7pDzbS81BPW0

I just copy pasted the share link. It seems to come with every adapter possible to fit whatever dash cam you have. Easy to install too.

Another thing. If you haven't tried just smooshing your wire in between the windshield and top interior. Mine fits in between without anything holding it in there, all the way to the side panel which it fit inside and then behind the rubber lining of the door which just pulled out and pushed back in then under my dash.

This looks like it: https://www.amazon.com/dp/B0102CK1BS/

I wish I'd known about this when I bought the suction cup mount for mine.

Vantrue N2 Pro, been solid in the year and a half I've had it. I got this mirror clamp mount to use instead of the usual suction cup thing, $9 well spent (if a little annoying to get situated at first). I tuck the power cable through the headliner, down the door seal, and to the 12v outlet. Came out really clean.

I use this to attach it to the rearview mirror if you can...summers and cheap tape dont mix well

Dude...spend $15 and get this mount from Amazon. Watching video at 45 degree angle isn't fun and causes most people to miss what you are trying to show them.

https://www.amazon.com/gp/product/B0102CK1BS/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

I have this rearview mirror mount. Works well, very stable, $11.99 USD: https://www.amazon.com/gp/product/B0102CK1BS/

I bought this. You don't have to worry about that coming off, and you don't have to buy a new one to swap it to a new vehicle. It has a bracket that fits the Yi dashcam. I have this exact setup and have 0 complaints.

I use this Dash Cam Mirror Mount - https://www.amazon.com/dp/B0102CK1BS/ref=cm_sw_r_cp_api_i_ZJ1zCb8FK7H89

AmorTek SnakeMount - Dash Cam Mirror Mount - 5 Different Joints Kit Suitable for Most Car Camera https://www.amazon.com/dp/B0102CK1BS/ref=cm_sw_r_cp_apa_vV0DxbBQ0DEJ1

I bought this and it works fantastic. It also helped make the footage more clear than before, I noticed the suction cup mount that came with my G1W-C was doing exactly what you described. (I live nearby, and this 112 degrees weather is just brutal!)

I got tired of the suction cup failing, so I got this one and got it tucked behind my rear view better

It fit my G1W-C before I replaced it, and yours looks like it was based on that model

AmorTek SnakeMount - Dash Cam Mirror Mount - 5 Different Joints Kit Suitable for Most Car Cameras

These are the setups i run. i prefer the apeman more.

https://www.amazon.com/gp/product/B07GFF7NLB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 with mount https://www.amazon.com/gp/product/B0102CK1BS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

​

and https://www.amazon.com/gp/product/B00NG84AT0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

​

be sure to get the biggest SD card the camera will hold.

Why not a dashcam with a ball-joint, like this one?

something like this

https://www.amazon.com/Dash-Cam-Mirror-Mount-KDLINKS/dp/B0102CK1BS

Dash Cam Mirror Mount - Fits Falcon F170HD,Rexing V1, Z-Edge, Old Shark, YI, Amebay,KDLINKS X1,VANTRUE and Most Other Dash Cameras https://www.amazon.com/dp/B0102CK1BS/ref=cm_sw_r_cp_api_YN8ZAb3HE1P74 - Mount

Roav by Anker Dash Cam C1, Car Recorder with Sony Sensor, 1080P FHD, 4-Lane Wide-Angle View Lens, Built-in WiFi with APP, G-Sensor, WDR, Loop Recording, Night Mode, Parking Mode [Upgraded Version] https://www.amazon.com/dp/B06XNSDRW8/ref=cm_sw_r_cp_api_OO8ZAbCG46QDE - Dashcam

The mount fits basically any dash can so there may be better ones out there!