Reddit reviews Digital Power Monitor Meter Usage Saving Energy Watt Amp Volt KWh Electricity Analyzer Monitoring Device Equipment System Wall Socket Outlet
We found 4 Reddit comments about Digital Power Monitor Meter Usage Saving Energy Watt Amp Volt KWh Electricity Analyzer Monitoring Device Equipment System Wall Socket Outlet. Here are the top ones, ranked by their Reddit score.
Large Lcd Counts Consumption By The Kilowatt HourConnects To Household Appliance & Assesses Its EfficiencyElectricity usage monitor connects to appliances and assesses efficiencyChecks The Quality Of Power By Monitoring Voltage, Line Frequency & Power FactorLow power consumption.
There are too many external factors to consider. Insulation value of your home probably makes the most difference and we really can't measure that.
​
You can easily found out for yourself with one of these:
https://www.amazon.com/Digital-Electricity-Analyzer-Monitoring-Equipment/dp/B07M8JKLG5/ref=sr_1_1?keywords=power+meter&qid=1556896508&s=gateway&sr=8-1
You can get a watt meter like this one: https://www.amazon.com/Digital-Electricity-Analyzer-Monitoring-Equipment/dp/B07M8JKLG5/ and use it along with your electric bill to figure out how much of the charge is for the server.
I, personally, don't like "internet of things" doodads attached to my home's mechanicals. They're vulnerable to attack by botnets.
This one, in particular, is just a fancy Kill-A-Watt type device.
Is it something you really need or is it just a $300 gadget you kinda want because it looks cool?
I'm not an electrician but an EE, so an electrician can comment on the physical side of things- but from the spec side:
6000 W at 120V is 50 amps. You want to stay below 80% threshold so two 30A breakers would be 48 amps. It's a little over spec, and it wouldn't pass code here in WA but you'd "probably" be fine. However, if you're using 30 amp breakers you'll need 10 gauge wire, which is normally not run in 120V (it's usually 220). Typically you'd run 12/2 or 12/3 romex on 20 amp breakers. If you're running that much line, it's probably cheaper/easier to run a higher gauge (like 6 AWG) and put a subpanel in the room you can split out in 20 amp breakers. You'd have to just ask them price wise to spec it out both ways and see.
As for a "meter" you can definitely have an electrician install on (especially if you get a subpanel), but you're probably more looking for something like this: https://www.amazon.com/Digital-Electricity-Analyzer-Monitoring-Equipment/dp/B07M8JKLG5
That said (and a big "don't do any of this if you're not comfortable") it's really easy to run wire. The actual wiring at the panel/subpanel and the outlets can be a little trickier if you're not familiar, but running the wire itself is just "grunt" work. Make sure you secure it every 4ish feet, within 6 inches of the outlet, and put nail plates if it's within 1.25" of the outside edge of wood.
Edit: Assuming you have access to a crawlspace/can open walls. Running wire through closed walls/spaces fucking sucks and I don't wish it on anyone.