Reddit Reddit reviews Diztronic Full Matte Black Flexible TPU Case for OnePlus One - Retail Packaging

We found 38 Reddit comments about Diztronic Full Matte Black Flexible TPU Case for OnePlus One - Retail Packaging. Here are the top ones, ranked by their Reddit score.

Cell Phones & Accessories
Cell Phone Cases, Holsters & Sleeves
Cell Phone Basic Cases
Diztronic Full Matte Black Flexible TPU Case for OnePlus One - Retail Packaging
Custom Fit for the OnePlus OneFull Matte Finish TPU Helps Prevent Fingerprints"Lay-On-The-Table" Design Helps Protect Glass Screen From Damage When Placed Face DownThin and Lightweight - Weighs Less Than 1 Ounce and Only 1.4mm Thick!Designed in Madison, WI USA
Check price on Amazon

38 Reddit comments about Diztronic Full Matte Black Flexible TPU Case for OnePlus One - Retail Packaging:

u/crunchytacooo · 12 pointsr/oneplus

i really like the diztronic tpu case

a couple friends (who don't know what the OPO looks like) assumed my phone was caseless when they first saw it, its design is that good

http://www.amazon.com/dp/B00MBS1NA0/ref=sr_ph?ie=UTF8&qid=1408668421&sr=1&keywords=diztronic

u/xlaxplaya · 7 pointsr/oneplus

I disagree with a lot of the Diztronic cons. Since when is ten bucks pricey? Also, "substantial" bulk? Really? It adds a couple millimeters to the front, but this is by design. And I definitely wouldn't consider it a "fingerprint magnet". In my experience, fingerprints only occur when my fingers are greasy from food, and they're easily wiped off.

u/thinkbeforeyousink · 7 pointsr/oneplus

I got this diztronic case from Amazon, I've dropped my phone quite a few times, even on concrete and it kept it completely safe and unscratched. It also doesn't add that much bulk to it

u/djdertate · 6 pointsr/oneplus

I have had the Diztronic TPU case for five months now and I love it. Offers good protection and pulls out of my pocket easily.

http://www.amazon.com/gp/aw/d/B00MBS1NA0/ref=redir_mdp_mobile/189-8013986-4539230

u/Cromulator · 3 pointsr/oneplus

I've had two cases so far, The Diztronic case that that has been mentioned, and this one.

The Diztronic I had first since everyone recommended it. It is really well made, fits nicely, its thin, all around great except... it's really slippery. Makes it difficult to use with one hand without it sliding off my palm. Multiple times I almost dropped the phone because of this.

Then I got Tudia case. I wanted something with a little more grip. This one has smooth/glossy border around the sides which kind of 'sticks' to your skin, making it much easier to use one-handed less likely to be dropped. On the down side, it does hold fingerprints around that thin border area. The quality is a bit lower as well, you can see the the lines from the molding process (which you can't on the Diztronic).

Overall, I'm kind of torn. The Diztronic is much nicer to look at, but the Tudia feels safer and makes the phone easier to hold. I'm going to give each more time, but thought I'd share my thoughts.

u/LittleHelperRobot · 3 pointsr/oneplus

Non-mobile: http://www.amazon.com/dp/B00MBS1NA0/ref=redir_mdp_mobile/189-8013986-4539230

^That's ^why ^I'm ^here, ^I ^don't ^judge ^you. ^PM ^/u/xl0 ^if ^I'm ^causing ^any ^trouble. ^WUT?

u/mehtabg · 3 pointsr/oneplus

I bought the Tudia case when I first bought the phone but I found that it added too much bulk to the phone and caught way too many fingerprints on the glossy back.

I've since bought the Diztronic TPU case and I love it. I would definitely recommend it if you were looking for a matte black case! (Link: http://www.amazon.ca/Diztronic-Matte-Black-Flexible-OnePlus/dp/B00MBS1NA0)

u/sumchinesewill · 3 pointsr/oneplus

The clear case from Oneplus does not really protect the top or the bottom of the phone. It just protects the back and the side and it's slippery as hell.

I would go a diztronic case

Diztronic

and a tempered glass screen protector. The most popular one it seems is Orzly, although I've had issues with it, it seems to be the best one from reviews

Orzly

There is no cases out right now that will keep the sandstone look unless you get a clear case but it'll still make it look washed out. You can get an aluminum bumper case but it cases reception issues.

u/Captain_Midnight · 3 pointsr/oneplus

Diztronic is the go-to recommendation. TPU is basically like rubber but more resistant to tearing and puncturing.

They also have a beefier "Ultra" version: http://www.amazon.com/Diztronic-Ultra-TPU-Case-OnePlus/dp/B00OSS12Z2

u/anotherDocObVious · 3 pointsr/oneplus

I swear by these - Diztronic TPU case

To this day - by far, THE BEST covers I've ever had, for the Oneplus One.

u/Joshposh70 · 3 pointsr/oneplus

Thirded, it's amazing Link for OP

u/crabsintrees · 2 pointsr/EDC
u/crushingyen · 2 pointsr/oneplus

Most of the people who own a OPO, including myself, would usually recommend this case: http://www.amazon.com/Diztronic-Matte-Black-Flexible-OnePlus/dp/B00MBS1NA0/ref=sr_1_1?ie=UTF8&qid=1420757932&sr=8-1&keywords=diztronic+oneplus

Slim, keeps the form factor of the phone, and you have two options between their regular, or the ultra version, which is a bit more protective on the corners and a bit thicker, but still slim nonetheless.

u/dfloyd13 · 2 pointsr/oneplus

Diztronic and Orzly. This is not even an opinion, they're the best :P Good luck!

u/mightymos · 2 pointsr/oneplus

Best thin and low profile case is the Diztronic Ultra TPU Matte case. Hands down. It offers the drop protection of a TPU, yet it's the case that adds the least amount of bulk.

Link to it on Amazon

u/dhol604 · 1 pointr/oneplus

It sticks out ever so slightly. Hard to notice. I have a bumper on my phone too, so I can't actually notice it...

But my phone is uber protected with low cost and almost no inconvenience. Still looks great and low profile. If I sell mine, I can sell it as 'like new' which I did with my Nexus 5 - same protection.

Protector:

http://www.amazon.com/gp/product/B00KQKATH8/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&linkCode=as2

Bumper:

http://www.amazon.com/gp/product/B00MBS1NA0/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&linkCode=as2

u/GumGumGuy · 1 pointr/oneplus

This is the best cover according to reddit.
http://www.amazon.co.uk/gp/product/B00MBS1NA0
Bought it a few weeks ago and it's the best. It match perfect with this screen protector:
http://www.amazon.co.uk/gp/product/B00KQKATH8

u/javapocalypse · 1 pointr/oneplus

+1 for Diztronic, I've gotten their cases for my last 2 phones. And will buy the one for this phone if I ever get one. Amazon link

u/0x0001111 · 1 pointr/oneplus

Not a bad case, but I would highly suggest getting this.

u/spacemanvt · 1 pointr/Axon7

is the Spigen case quite thick?
I have a Diztronic case for my oneplus which is very slim and nice... is this similar:

https://www.amazon.com/Diztronic-Matte-Black-Flexible-OnePlus/dp/B00MBS1NA0

u/The42c0w · 1 pointr/oneplus

is it possible to give a comparison between the TUDA and the diztronic? (http://www.amazon.com/Diztronic-Matte-Black-Flexible-OnePlus/dp/B00MBS1NA0/ref=sr_1_1?ie=UTF8&qid=1420757932&sr=8-1&keywords=diztronic+oneplus)

im a bit torn on which one to choose

u/reddituser6579 · 1 pointr/oneplus

Diztronic case is very thin and my cousin has one on his OPO.

Link

u/DudeShift · 1 pointr/oneplus

Is there any reason why you went with it rather then the Diztronic case?

u/crazytaco124 · 1 pointr/oneplus

How is it? Does it look/feel like wood IRL, or is it just platic? I just ordered this one, but I will probably get the wood one instead if it is sturdy

u/KoaKoaKoa · 1 pointr/oneplusone

I use these

Glass Screen Protector:

Orzly® - OnePlus ONE Premium Tempered Glass 0.24mm
http://www.amazon.com/dp/B00KQKATH8/ref=cm_sw_r_udp_awd_aIUAub12SBZT0

Thin Sturdy Rubber Phone Case:

Diztronic Full Matte Black Flexible TPU Case for OnePlus One
http://www.amazon.com/dp/B00MBS1NA0/ref=cm_sw_r_udp_awd_zJUAub0T60SSN

u/luvablemarmot · 1 pointr/oneplus

I purchased a Pelosi Flip cover case which I really liked for a few minutes until I couldn't get my phone out of the case. Switched to the Diztronic case and its fantastic. Light, thin and easy to take on and off. Links to both cases below (also the places I got them from)

http://www.ebay.com/itm/Afan-Flip-Case-Cover-For-Oneplus-Oneplus-one-Screen-Protector-3-Colors-/171370645154

http://www.amazon.com/dp/B00MBS1NA0/ref=pe_385040_121528360_TE_dp_1

u/lutgholein · 1 pointr/oneplus

For my old OPO, I tried on a bunch of cases, including Tudia, Cruzerlite, Diztronic, Diztronic Ultra, and Ringke FUSION. I ended up sticking with Diztronic Ultra, but the problem with all those cases was that they all covered up the sexy Sandstone finish.

So I got the Sandstone case this time for my OP3, and also the Black Apricot to change it up once in a while.

As for screen protectors, right now I have the official OP3 tempered glass screen protector. The quality is really nice and it feels good to the touch, but it really bothers me that it doesn't cover the whole screen, leaving a significant gap on the edges.

The whole point of tempered glass screen protectors is to absorb shock if the phone is dropped, so that the protector cracks leaving the phone screen/digitizer intact, so if this phone gets dropped on its corners or edges, this tempered glass screen protector wouldn't do much to help.

Another issue is that the official screen protector is narrower than the width of the screen, the gap it leaves is bigger than the side bezels, so it makes the display look weird.

I ordered the PLESON full screen tempered glass today, but somebody was telling me in another thread that it sucks, so IDK, we'll see how it goes.

u/moch1 · 1 pointr/oneplus

In my opinion the Diztronic case is rather thin and it definitely has a lip to protect the glass.
Amazon: http://www.amazon.com/Diztronic-Matte-Black-Flexible-OnePlus/dp/B00MBS1NA0/