Reddit reviews Donner DPA-1 Pedal Power Supply Adapter 9V DC 1A Tip Negative 5 Way Daisy Chain Cables for Effect Pedal
We found 11 Reddit comments about Donner DPA-1 Pedal Power Supply Adapter 9V DC 1A Tip Negative 5 Way Daisy Chain Cables for Effect Pedal. Here are the top ones, ranked by their Reddit score.
OUTPUT: 9V DC, 1A (1000mA), Tip Negative (-) designINPUT: AC100V-240V, 60Hz, 6.5W5 way cable chain could power on 5 pedals at the same timeProfessional noise isolation performanceFit for most brands of guitar effect pedals
You'll need a standard 9v power supply following the Boss standard - 2.1mm tip negative.
I'd suggest avoiding eBay, because there are a lot of dodgy Chinese power supplies that aren't really safe or reliable. If you're on a budget, I'd recommend the Donner DPA-1 - it's $14, it'll power up to five pedals and it comes with a warranty.
What you need is a daisy chain. You can either buy just the daisy chain with your existing power supply, or you can get a combo daisy chain + power supply.
This will likely be just fine for just two pedals, but once you get a few more pedals, or you get more power hungry digital pedals, or pedals with special voltage requirements, you'll want to look into an isolated power brick like a Voodoo Labs Pedal Power, or Truetone CS7
The pedal itself will require a power supply. They come in singles and multi-pedal versions. And you'll require an additional guitar chord to run from the pedal to your amp. Most pedals will run a 9V battery, but that might get expensive for you over time.
They usually don't come with one, though some do, because they generally all use the same standard (2.1mm by 5.5mm center negative 9v). You can get a cheap wall plug with a daisy chain for 5+ pedals for under $20 on Amazon, which is a great place to start since it will cover your needs probably for years.
https://smile.amazon.com/Donner-Supply-Adapter-Negative-Cables/dp/B012VQ5A7S/ref=sr_1_6?ie=UTF8&qid=1537208434&sr=8-6&keywords=one+spot+power+supply
I still use one of these with my travel board.
I have good luck with this
https://www.amazon.com/gp/product/B012VQ5A7S/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Before I had the BBE I was powering 5 of them with this Donner Daisy Chain with no problem.
I had been using a daisy chain power supply like this one and getting a nasty amount of noise, before I upgraded to the Voodoo 2. Currently there are no chains at all, each pedal is getting isolated power.
Huh, tossed a battery in and it works fine. Could it be something with my 9v supply? It seems to work fine on my boss rc1 and dd7. It’s this one https://www.amazon.com/dp/B012VQ5A7S/ref=cm_sw_r_cp_apip_S6hVRieiRpre8
Where does the 9v power supply factor into that?
It gets plugged into an electrical outlet right? So there’s essentially 2 cables and a cord for each pedal?
https://www.amazon.com/Donner-Supply-Adapter-Negative-Cables/dp/B012VQ5A7S/ref=mp_s_a_1_3?ie=UTF8&qid=1549826260&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=daisy+chain+5&dpPl=1&dpID=41m52P-WtQL&ref=plSrch ?
cool i saw the voodoo before i thought it was a little pricey. i also dont own a pedalboard. thats another thing i was probably going to look into pretty soon as well. i have this im not sure if having this could ruin pedals in any way just because its cheap. https://www.amazon.com/Donner-Supply-Adapter-Negative-Cables/dp/B012VQ5A7S/ref=sr_1_3?ie=UTF8&qid=1494128956&sr=8-3&keywords=guitar+pedal+power+supply
Some no name power supply like this one
Donner DPA-1 Pedal Power Supply Adapter 9V DC 1A Tip Negative 5 Way Daisy Chain Cables for Effect Pedal https://www.amazon.com/dp/B012VQ5A7S/ref=cm_sw_r_cp_api_i_HHEvDbZDW1MQW