Reddit reviews Duratrax Pit Tech Threadlocker .2 oz

Follow the directions and you'll be fine. You'll need a Phillips screwdriver to build it, and that's about it. If your Phillips screwdriver is one of those types with "bits", you'll need a regular one as there is a hole that those other ones won't fit in. Everything else should be included, including grease. You might want some threadlock for the metal to metal fastenings: https://www.amazon.com/DuraTrax-Pit-Tech-Threadlocker-2/dp/B0015H6DVC/ref=sr_1_2?ie=UTF8&qid=1492756164&sr=8-2&keywords=hobby+thread+lock

You will need a radio, receiver, servo for steering, and battery and charger. You picked a non-performance model here, so you won't need high-end stuff. You could probably get by with a cheap Futaba servo: https://www.amazon.com/Futaba-FUTM0031-S3003-Standard-Servo/dp/B0015H2V72/ref=sr_1_4?s=toys-and-games&ie=UTF8&qid=1492756615&sr=1-4&keywords=Servo

For radio and receiver I'm hoping someone else can help. I have a Spektrum radio and receiver that I like a lot, but there are cheaper ones - I see Flysky(?) thrown about here often.

For a battery, I recommend a 2S lipo pack such as this. A 5000mah pack will give you around 20 minutes of hard run time and maybe more. Pay attention to how the wires exit the pack! Wires that poke out the end won't work. Neither will the kind that exit the top. You want a pack with wires that come out the corner.

Shop around on the charger. Get a lipo balance charger. Maybe someone can recommend a good one for you as I've got a fairly expensive dual charger. Help me out guys!