Reddit reviews Duratrax Ultimate E-Clip Tool 1.5Mm-5Mm
We found 5 Reddit comments about Duratrax Ultimate E-Clip Tool 1.5Mm-5Mm. Here are the top ones, ranked by their Reddit score.
FEATURES: Easily installs and removes e-clips from 1.5mm-5mm in size Space-saving folding design Constructed of durable steel with sizes marked on eacINCLUDES: One Ultimate E-Clip ToolThis is the Ultimate E-Clip Tool from DuraTrax; FEATURES: Easily installs and removes e-clips from 1.5mm-5mm in size Space-saving folding design Constructed of durable steel with sizes marked on eac
A gasket removal tool (OE has a good set here: http://www.orphanespresso.com/O-ring-Installation-Removal-Pick-Tool-Set_p_4667.html) and C clip pliers (get the channellock ones here: https://www.amazon.com/Channellock-927-8-Inch-Retaining-Plier/dp/B000TG80SY/, the generic ones are awful). Outside that, only generic tools like wrenches and screwdrivers. An E clip tool is also really useful to keep the E clips from flying across the room, but not strictly necessary. https://www.amazon.com/Duratrax-Ultimate-E-Clip-Tool-1-5mm-5mm/dp/B001TAJP9W
You'll need gaskets of course, for a gasket kit, OE offers a good inexpensive one: http://www.orphanespresso.com/La-Pavoni-Rebuild-Kit--PRE-Millenium-Models--Full-Kit_p_4749.html
But you'll want a few other things too.
Base gasket: https://www.espressoparts.com/parts/home-espresso-machine-parts/la-pavoni-home-espresso-machine-parts/la-pavoni-europiccola-professional-diagram-1/la-pavoni-europiccola-tank-to-base-gasket
Relief valve stopper: https://www.espressoparts.com/la-pavoni-relief-valve-spring-stopper
If it's really old (like, very earliest models), you might have to add this on too: http://www.orphanespresso.com/Brass-Sleeve-Machine-Portafilter-Gasket_p_1608.html
You should probably also upgrade the thermofuse to one of these: https://www.espressoparts.com/parts/home-espresso-machine-parts/la-pavoni-home-espresso-machine-parts/la-pavoni-europiccola-professional-diagram-1/la-pavoni-high-limit-reset-thermostat
You may or may not end up needing more, but this should suffice for a standard rebuild as long as any parts that aren't supposed to be consumable aren't broken.
As a further option, you can also upgrade to stainless steel hardware pretty cheap: http://www.orphanespresso.com/Pavoni-Cremina-Group-Rebuild-Stainless-Steel-Hardware-Kit_p_2005.html
Aaaaaand last of all, you can upgrade to an actually decent steam tip too: http://www.orphanespresso.com/OE-SLIM-Single-Hole-Steam-Wand-Tip--Stainless-Steel_p_2175.html
https://www.amazon.com/Duratrax-Ultimate-E-Clip-Tool-1-5mm-5mm/dp/B001TAJP9W
OP I used one of these.
You can get a e-clip tool https://www.amazon.com/Duratrax-Ultimate-E-Clip-Tool-1-5mm-5mm/dp/B001TAJP9W
I have one and it works, but it doesn't guarantee they still go shooting of occasionally. Like others have said, needle nose pliers are the way to go
If you're having that much trouble, you know they make tools for that, right?
http://www.amazon.com/Neiko-5-Piece-Remover-Installer-01970A/dp/B000W94UEQ/ref=pd_sim_21_1?ie=UTF8&dpID=51FaBAPsREL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=167RWG156PHW1ZRS8MWK
http://www.amazon.com/Duratrax-Ultimate-E-Clip-Tool-1-5mm-5mm/dp/B001TAJP9W/ref=pd_sim_469_3?ie=UTF8&dpID=51KCxQW1NUL&dpSrc=sims&preST=_AC_UL160_SR151%2C160_&refRID=1CDW5N8MHS0NJYJX8MAF
I got one of these tools, makes a huge difference
https://www.amazon.ca/dp/B001TAJP9W/?coliid=I3K62GM2HK97XS&colid=29SJ85WPFIUIG&psc=1&ref_=lv_ov_lig_dp_it