Reddit reviews Eagle One 1035605 Nevr-Dull Wadding Polish - 5 oz, Single (E301131001)
We found 27 Reddit comments about Eagle One 1035605 Nevr-Dull Wadding Polish - 5 oz, Single (E301131001). Here are the top ones, ranked by their Reddit score.
Eagle One Nevr-Dull Wadding Polish protects and restores most metal surfaces to their original sparkling finishProven for over 70 years to maintain the appearance of your car or truck’s metal surfaces with a mildly abrasive cotton-paste textureRemoves rust, corrosion, and tar immediately, without scratching even the most delicate metal surfaces, leaving your car with a sleek shinePolishes to perfection, leaving no deposits behind on your car or truck’s metal work just a mirror-slick gleam that’ll attract admirers near and farPackaging may vary – new packaging, same powerful formulaMaintains the appearance of any metal surfaceRemove rust and tar with little mess and easy applicationNon-abrasive for a gentle, yet detailed clean and polish
It's not very likely that it's pewter. Pewter contains lead that leaches into food and is not used much anymore.
That said, does need a polish, as in removing scratches or is it just discoloration and dirt? Polishing would require proper polishing compounds and wheels. If you want to clean it up try "Eagle one Never Dull". It's a wadding that comes in a tin and it does a surprising good job at tarnish, mineral stains, and overall cleaning without scratching. That would probably be my first stop. It is a bit stinky but works well.
https://www.amazon.com/Eagle-One-E301131001-Original-Nevr-Dull/dp/B000CNBI1A
Nevr-dull works great for this. Also available at local stores, like Autozone, etc.
Mine were just as bad and used this stuff.
http://www.amazon.com/Eagle-One-1035605-Nevr-Dull-Wadding/dp/B000CNBI1A
Takes about 10 minutes and I was able to get my shinny back
Never-Dull
Like the title says, between my final semester of college, moving and starting a new job, I haven't had the time to give my KM a good cleaning. For those interested in the process, here goes:
I started by disassembling the entire thing. The coal tray, grommets and any other removable pieces got a bath in hot water and dish soap. The stem was scrubbed with a brush soaked in the soapy water, and left to soak for a few minutes. The soap worked to loosen any built up grease and other shit inside. If you've never done this, do it, its disgusting the stuff that comes out. After the good soak, I ran water down the stem and passed some paper towels through. If you've ever cleaned a gun, its basically the same thing. The base got a good soaking in plain old hot water and was scrubbed inside with a brush and wiped clean on the outside. I don't recommend the soap on the base as its a bitch to get out.
For the actual polishing, I used Eagle One Never Dull (http://amzn.com/B000CNBI1A). Lay down a towel, grab a wad and get to work. I like to rest the bottom of the stem on my foot and spin the whole stem while I hold the wadding to it. As you work, the wadding will turn gray as it removes the tarnishing. As it gets grayer or starts falling apart, just grab some more. Once you've hit the whole thing, repeat the process but with a dry microfiber towel. At this point, you're done, or you can continue repeating the process until you're satisfied! This stuff is fairly harsh, so don't use it in a poorly vented room and I recommend washing your hands thoroughly when you're done.
Enjoy!
You just need to polish the frets. And change those strings. Yikes. :)
Get some Eagle One Nevr-Dull from your local auto parts store. I picked some up from PepBoys recently.
Put tape on the fretboard right up to the edge of the frets to protect the wood. Then scrub the frets with Nevr-Dull. Rinse and repeat.
Once you're done, remove the frets and wipe down the fretboard with a clean cloth and naptha. You just want to get any loose bits and gunk off.
Put some graphite in the nut and saddle slots.
Toss a little bit of mineral oil on the fretboard and restring that puppy.
It looks like the rust ate through the plating so it'll take a bit of effort to make it look like new. You could use a rust remover like whink then an all purpose metal polish like eagle one never dull to make it spiffy.
Eagle One E301131001 Original Nevr-Dull Wadding Polish for all Metals, 5 oz. https://www.amazon.com/dp/B000CNBI1A?ref=yo_pop_ma_swf
This? http://www.amazon.com/Eagle-One-1035605-Nevr-Dull-Wadding/dp/B000CNBI1A/ref=cm_cr_pr_product_top
NEVR-DULL can be found in the car care section of walmart, or autoparts stores
i use never dull. they sell it at any autoparts store. it works great.
http://www.amazon.com/Eagle-One-1035605-Nevr-Dull-Wadding/dp/B000CNBI1A/ref=sr_1_3?ie=UTF8&qid=1464995628&sr=8-3&keywords=never+dull
If you want to make it shiny as can be, you might hit the body with some Nevr-Dull.
http://www.amazon.com/Eagle-One-1035605-Nevr-Dull-Wadding/dp/B000CNBI1A
You can get this stuff at Walmart/Autozone. I've been using it for 10+ years.
Best polish product ever
Completely removes any stains and tarnishes, and leaves a sparkling shine with absolutely zero abrasion. This container has lasted me for over a year. Just rip a little off and rub away!
Nevr-Dull works pretty good, but I agree many others, I like the patina.
Those rust spots/chips on the deadbolt, no way to get rid of those without replacing the lock.
Thanks. I went with this stuff http://www.amazon.com/Eagle-One-1035605-Nevr-Dull-Wadding/dp/B000CNBI1A since it said safe on all metal. Worked really well. If I know for sure it was stainless I was going to go at it with some 0000 steel wool. I read that it's a bad idea to use that on chromed metal.
I pretty sure they are aluminum maybe billet but that is a stretch. I would use Eagle One Never Dull. That shit works on everything like a charm!
You should use this on all the luggage hardware.
It will make an incredible difference. I use it on old bicycles.
It happens. I haven't used it myself yet, but Eagle One - Never Dull is supposed to make an easy(er) time of cleaning it up.
haha I always love parking next to another GTI. Even better when I return to my car to find another one parked next to it :]
I also recommend some Nevr Dull to help keep your exhaust tips shiny https://www.amazon.com/Eagle-One-1035605-Nevr-Dull-Wadding/dp/B000CNBI1A :P
I've used this on a lot of non automotive related (reason I bought it in first place) pieces before with good results.https://www.amazon.com/Eagle-One-E301131001-Original-Nevr-Dull/dp/B000CNBI1A
As for the upholstery part, you might need to take that to an upholstery guy, some of that stuff is rather tricky. I think once you rip the fabric off you might have hard time getting another fabric on without a specialized sewing machine.
It's slightly pitted so it may never be great again. However Eagle One Never Dull, any parts store will have it, will shine it up. Rub it on and polish it up, then wipe off with clean rag. Enjoy.
http://www.amazon.com/Eagle-One-1035605-Nevr-Dull-Wadding/dp/B000CNBI1A
I've had good luck with Nevr-Dull: http://www.amazon.com/Eagle-One-1035605-Nevr-Dull-Wadding/dp/B000CNBI1A
Eagle One "Never Dull" and a clean terry cloth or similar rag-type article of cloth. 30 seconds and some elbow grease and it will be all gone.
Link: [https://www.amazon.com/Eagle-One-1035605-Nevr-Dull-Wadding/dp/B000CNBI1A]
You're using this stuff?
Guy at a track day clued me into this stuff a few years back - Nevr-Dull Wadding Polish.
Removes everything without hard scrubbing, leaves a protective coating that makes it so you can wipe daily carbon buildup away with a dry rag.
Fucking amazing, all four chrome tips of my 2013 WRX are still stainless/spotless after seven years.
Pro-tip, wad the wadding up in a rag or wear gloves to apply it. The chems in that stuff will seep into your skin very easily.
I've always used this stuff
http://www.amazon.com/Eagle-One-1035605-Nevr-Dull-Wadding/dp/tags-on-product/B000CNBI1A
to clean and polish my CPUs and heatsinks. You get the same results, and not quite as risky as sandpaper. You may want to try it out next time.