Reddit reviews eBoot 100 Pieces Adhesive Cable Clips Wire Clips Cable Wire Management Wire Cable Holder Clamps Cable Tie Holder for Car, Office and Home

Link to those clips?

Found These on Amazon.

Here’s the ones I bought. Might be better out there.

eBoot 100 Pieces Adhesive Cable Clips Wire Clips Cable Wire Management Wire Cable Holder Clamps Cable Tie Holder for Car, Office and Home https://www.amazon.com/dp/B01HR9VS4I/ref=cm_sw_r_cp_api_i_Hy5ACbGWHQ2K7

It seems that your comment contains 1 or more links that are hard to tap for mobile users.
I will extend those so they're easier for our sausage fingers to click!


Here is link number 1 - Previous text "1"

Here is link number 2 - Previous text "2"



----
^Please ^PM ^/u/eganwall ^with ^issues ^or ^feedback! ^| ^Delete

For those situations I enjoy using these little guys

eBoot 100 Pieces Adhesive Cable Clips Wire Clips Cable Wire Management Wire Holder Cable Clamps Cable Tie Holder for Car, Office and Home https://www.amazon.com/dp/B01HR9VS4I/ref=cm_sw_r_other_apa_d2H9yb49NZWSJ

This \^ and you can also buy some cable clips/anchors like these and just stick them wherever works best in the case :)

Here, take these! You need them...... all three.

Looks professional.

It's a minor thing but you should remove the kinks from your mouse. You only need to do it the the part that is visible on the desk.

Also, some kind of phone dock might be a good idea if you can find one that doesn't take up a lot of desk real estate. Gives the phone a home on the desk.

Maybe grab something like this for your controller so it looks like it has a place on the desk as opposed to looking like it's been put down after a gaming session. https://www.amazon.com/dp/B015KJAQX6?th=1

You seem like you are the kind of person who appreciates quality. I say this because you have a pair of HD800's. If you are such a person then I'd recommend building yourself a custom mechanical keyboard instead of having to put up with the Corsair K70 RGB. Check out /r/MechanicalKeyboards if you're interested! ^join ^usssss...

Speaking of your headphones. Again, like the controller, you should make them look like they have a dedicated place. You should get two wall-mountable headphone stands and put them up on that left hand side wall. If you wanted to sacrifice convenience for looks then you could also get a wall-mounted hook for the cables since they are detachable. I always thought that cables that hang from headphones are messy. If you remove them then they are much easier to display nicely.

Use these at the far end of the desk near the wall and make your keyboard cable tidier: https://www.amazon.com/dp/B01G23R0K6/

Your cable management is quite good but can be improved:

• Cables under the both monitors can be hidden behind the arms. Black electrical tape can be good for this.
  
• Cables out the back of the PC can be hidden with some sort of cover. Black card or black cloth are good choices for this.
  
• Cables that are hanging under desk can be strapped to the underside if it.
  
  Use whatever works best for you:
  
  https://www.amazon.com/dp/B01MSWS6Z7/
  https://www.amazon.com/dp/B06XTH9XWN/
  https://www.amazon.com/dp/B01HR9VS4I/
  
  ^wires ^are ^evil
  
  If you do any of this things I'd love it if you could send me a photo!

Like these, just search "cable management clips" on Amazon, there are so many variations.

Lack Tip. You can unscrew the bottom legs, then use 3in. screws to go into the top units legs. Rescrrw b nottom legs in. Super solid and no visible external plates. Then use these or similar. You can get 2 rows side by side on 1 leg of them.

https://www.amazon.com/dp/B01HR9VS4I/ref=cm_sw_r_cp_apa_i_HzKbBb7B9H29T

Something like these

Edit: alternative

https://www.amazon.com/gp/aw/d/B01HR9VS4I/ref=mp_s_a_1_3?ie=UTF8&qid=1486596329&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=cable+clips&dpPl=1&dpID=51qa%2BBdM9oL&ref=plSrch
You can thank me later

I use these for all of the cable management in my house. You get a ton for the price and they are tiny and don't stand out, but just big enough to hold most cables around your PC and television.

Edit: wasn't happy with phrasing.

I'm not Op but I got you homey.

I see a few different products being used, especially on the underside of the desk. My links may not be the exact same products but they're functionally the same

1

2

And 3

Not sure what your board looks like but I always try to route all cabling underneath where possible.

Once underneath I use a few different types of organizers to avoid a web of cables.

I use velcro zip ties (like this: https://www.amazon.com/Pasow-Reusable-Fastening-Organizer-7-Inch/dp/B0154MS9Q0/ref=sr_1_5?ie=UTF8&qid=1503940004&sr=8-5&keywords=cable+organizer)

I also use these things: https://www.amazon.com/eBoot-Pieces-Adhesive-Management-Holder/dp/B01HR9VS4I/ref=sr_1_10?ie=UTF8&qid=1503940004&sr=8-10&keywords=cable+organizer

Here is a brief step by step on how to somewhat tame this birds nest of spaghetti.

1. Unplug everything and start with the power, go from the wall outlet, then to the power strips. Use these to make things look cleaner. Its also a key time to re-organize where you put stuff, as it will ultimately determine your wire management and routing. If it has a bulky power brick, you might want to get this to help with the wall warts.
   
   
2. Now for the audio and video cables your AV switcher is where a lot of them come from so more cable management is good. (pro tip, label the HDMI so you know where its going) I find that cable clips are great for making sure everything stays nice and neat. Velcro Zip Ties are a wonderful thing to have, and you could probably just get by with buying those and nothing else. But if you have slack on a cable, wrap that up like a breakfast burrito.
   
   
3. Networking comes next, and boy howdy it looks like you have a lot. Apply the same technique previously used of unplugging cables (label them prior if you want to make your life easier) and using a cable bundler to make it look clean. In addition, you can probably put some of the routers behind the entertainment center with all the new space you are getting by organizing the other cables.
   
   Some other things I would say is, put your UPS outside of the entertainment center, those things take up a ton of space and are heavy. If you ever need to unplug something or change the battery it will be very inconvenient. I would place it right next to the entertainment center or behind it. Also consider using double sided 3M foam tape to mount your switch upside down underneath a shelf, that way it frees up some space. Aside from that, theres not much else that I can see being done. I hope this helps. You are contractually obligated by reddit to post the before and after if you decide to tackle this. (not really, but I would love to see the results!)

Gotcha! I used a Led Strip Light I bought off Amazon. They come in a roll and you can cut them to the exact length you need. There are a bunch of options! White, RGB, remote controlled, app controlled etc.. Here's what I used:
https://www.amazon.com/dp/B078S48ZTY/ref=cm_sw_r_cp_apa_go85BbST4BNZ3

Most are 9v or 12v, and have the same power jacks that pedals use. So I plugged the lights into my power supply. They have an adhesive back to them but I used the cable management clips below to secure them to the board.

https://www.amazon.com/dp/B01HR9VS4I/ref=cm_sw_r_cp_apa_Og85BbWMEJT53

Some of these and this thing is what I used for mine (also a little bit of these can go a long way)

Your post may be deleted for violating Rule 2 just FYI.

Here are my recommendations though:

• Mount the surge protector under your desk using heavy duty double stick tape or screws if it has keyholes
  
• For your keyboard/mouse cables. If you're willing, the best way is to drill a hole just large enough that they can fit through. Drill it underneath where your large mousemat is. Then cut a tiny slit in the mousemat for them to come through. You can then feed them under down through and under the desk.
  
• Mount your USB hub under the desk on the front off to the left or right side from where you sit using command strips or double stick tape. Easy access to plugin items when needed and just unplug devices when not using. If you're using the ports 100% of the time, it may be better to mount it under the desk towards the back out of the way. I use mine only for short term things like pluging in a headset, SD card reader, etc. So when I'm done I just unplug them and it's clean.
  
• Under the desk you're going to want to buy some cable clamp type things. Depending on your types of wires you may need a few different sizes. I've bought tiny ones for single thin cables, medium ones for a usb or two, and xlarge ones for power cords/hdmi/multiple cables
  
• Depending on your situation, you could also pick up the IKEA Signum rack for under the desk to help with things, or a J Channel cableracewaytype sitution
  
• With all of the management and running things under the desk, I personally found I needed to buy a few extenders for different things. So I had to pick up a couple of USB 3 extension cables, as well as a couple of power extension cables so I could get things all cleanly routed then down/up at one single point to the outlet or computer.
  
  Any other questions just ask. I could always take pictures of my setup and under the desk if it would help, just PM me for those.

I use these in my car for my dash cam and usb cables

https://www.amazon.com/eBoot-Pieces-Adhesive-Holder-Office/dp/B01HR9VS4I/ref=sr_1_2?ie=UTF8&qid=1477979258&sr=8-2&keywords=cable+management+tape

eBoot 100 Pieces Adhesive Cable Clips
https://www.amazon.com/dp/B01HR9VS4I/ref=cm_sw_r_cp_api_i_SMcNDbVKEJBXA

Alex Tech 25ft - 1 inch Cord Protector Wire Loom Tubing Cable Sleeve Split Sleeving For USB Charger Cable Power Cord Audio Video Cable – Protect Cat From Chewing Cords - Black https://www.amazon.com/dp/B07FW3MKGH/ref=cm_sw_r_cp_api_i_IFo0CbT7FDW0S


Pasow 50pcs Cable Ties Reusable Fastening Wire Organizer Cord Rope Holder 7 Inch (Black) https://www.amazon.com/dp/B0154MS9Q0/ref=cm_sw_r_cp_api_i_tGo0CbCF1T2B0


eBoot 100 Pieces Adhesive Cable Clips Wire Clips Cable Wire Management Wire Cable Holder Clamps Cable Tie Holder for Car, Office and Home https://www.amazon.com/dp/B01HR9VS4I/ref=cm_sw_r_cp_api_i_0Go0Cb8EVVNYV


Plus some other materials i probably missed but a quick amazon search of “Cable Management” on amazon can start to trigger some awesome ideas.

You really gotta sit there and stare at it and think how you can hide everything, neatly and routed in a way thats easy to clean. Having my monitors wall mounted allowed me to use the brackets to hide the long monitor power cords and hdmi cables i was also able to mount a power strip behind there so it was easier to power things while hiding wires.

They'll work on anything you can nail in to. Generally you'd want to hit a stud as just nailing in to drywall is kinda iffy if it will hold. They also make sticky backed ones https://www.amazon.com/eBoot-Pieces-Adhesive-Management-Holder/dp/B01HR9VS4I/ref=pd_lpo_vtph_23_bs_t_1?_encoding=UTF8&psc=1&refRID=TWFK3CWP96NMQEVBKPMB

You can use cable clips of some type like these or these or these.

Also, someone else said that these worked well for them too: https://www.amazon.com/dp/B01HR9VS4I/ref=cm_sw_r_cp_api_i_Hy5ACbGWHQ2K7

Either way, thank you and good luck!

Cable raceway (I have this one i like it alot): https://www.amazon.com/Channel-Cable-Raceway-Black-Length/dp/B002DNM42O/ref=sr_1_1?ie=UTF8&qid=1491691968&sr=8-1&keywords=cable+management
Wire clips (I have these as well they are pretty handy): https://www.amazon.com/eBoot-Pieces-Adhesive-Management-Holder/dp/B01HR9VS4I/ref=sr_1_sc_3?ie=UTF8&qid=1491691977&sr=8-3-spell&keywords=cablemangement
Cable sleeve: https://www.amazon.com/Management-Sleeve-JOTO-Computer-Entertainment/dp/B015HWXG4M/ref=sr_1_5?ie=UTF8&qid=1491692072&sr=8-5&keywords=cable+management
Cable box: https://www.amazon.com/Bluelounge-CableBox-Black-Management-inches/dp/B0019T0JA2/ref=sr_1_3?ie=UTF8&qid=1491691993&sr=8-3&keywords=cable+box

There are some items that will help. I have the cable sleeve, cable raceway, and cable clips. I hear the cable box is nice i don't have one because my power bricks are on the roof of my desk. gl

If you are needing supplies to help with cable management, here are a few cheap options I’ve used for my setup:

https://www.amazon.com/dp/B01HR9VS4I/ref=cm_sw_r_cp_api_6OqWAb97M00Y9

https://www.amazon.com/dp/B001E1Y5O6/ref=cm_sw_r_cp_api_yQqWAbWSFBNQT

Hopefully this helps!

Cable management is not a fun thing to do but in my opinion one of the most rewarding for a set up in terms of aesthetics. I spent about $6 on Amazon for some cable clips, and used some zip ties to clean up all the wires under my desk. It took me around an hour or so. It really cleaned up the look of my setup which is semi-minimalistic as well. I even drilled a hole in my desk for the mouse and keyboard. I love how it looks even more now. I would also recommend a cable race way, or a rack to hold the cables up, however I just took advantage of my 100 clips (actually 98 after I counted) and a lot of zip ties to hold it up. Also a cable sleeve for the back of the pc helps out a lot. There are many tutorials on YouTube but really it just takes some time and some clever thinking on how to hide everything and make it look pretty.

Also I dig the large monitor/T.V set up

Good luck, and remember your set up is never compete ;)

They sell pressure clips on ebay for dirt cheap my dude.

https://www.amazon.com/OHill-Organizer-Management-Organizing-Adhesive/dp/B071FXZBMV/ref=sr_1_1_sspa?keywords=cable+clip&qid=1565564248&s=gateway&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExWkdVNzVJSUdXWlBaJmVuY3J5cHRlZElkPUEwMTAzODQ5MjIwRzBTSThUR0NHTiZlbmNyeXB0ZWRBZElkPUEwMTk1NzQxMzlZWldXOThGQ1pYUCZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

or more for cheaper

https://www.amazon.com/eBoot-Pieces-Adhesive-Management-Holder/dp/B01HR9VS4I/ref=sr_1_4?keywords=cable+clip&qid=1565564268&s=gateway&sr=8-4

I used these.

https://www.amazon.com/gp/product/B01HR9VS4I/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

I found these, and they're arriving today. EBS flat patches arrive Monday. Fingers crossed I'm thinking of all my measurements correctly.

Get some adhesive cable clips like these

Nice battlestation! Some tips I would recommend with this desk are cable trays, more cable clips, and a cable sleeve. I found that these cable clips are pretty good for guiding cables down the legs but aren't that great for holding cables under the desk. For an even cleaner look buy some extension cables and velcro ties and put that tower on a night stand, drawer, or cabinet (more desk space).

If you're going to use the same desk in your new spot, I recommend ordering some of these https://www.amazon.com/gp/product/B01HR9VS4I/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1 and just taking the time to get the cables in order. Super simple to un-clip your wires and move. I was skeptic, but these little clips have made my cable management a breeze.

So you have four corners on the recessed ceiling (higher up), and four corners on the lower ceiling. I would almost prefer to put the cameras in the corners of the lower ceiling, because it would give a more straight-on view of the player/controllers. Each camera has a narrower viewing cone at extreme close proximity. The further from the main playspace they are, the more that cone has a chance to "spread out" and cover the actual playspace. In this case, you would draw your playspace with at least (2 ft) or (0.6 m) distance from each of the four walls, so people don't bash their knuckles at the borders.

However, you might not want your cameras to be further than (12 ft) or (3.6 m) apart from each other (for best tracking quality). I don't have a big enough room to run into this limit, so you may be fine with further spaced out cameras. If the lower ceiling corners are further apart than (12 ft) or (3.6 m), then you may want to put them in the recessed ceiling anyways. You can always ignore the Oculus Rift setup's warnings about camera spacing, by the way. In fact, with larger playspaces, the Oculus setup wizard will always complain. Don't worry about it.

Also, you might want to consider using this USB card. It can handle the throughput of all four cameras in USB 3.0 mode, if desired. You can downgrade any camera to USB 2.0 by simply running a USB 2.0 cable to that camera instead of 3.0. A passive USB 2.0 cable is fine for short runs, but consider an active USB 2.0 cable (like the one that comes in the box of an extra Rift camera) for longer runs. You should put your Rift headset in one of the motherboard's USB 3.0 ports (USB 2.0 might actually be fine), and then put all four cameras (you might only need three cameras) in the USB extension card.

You can search this subreddit for discussions on whether you want/need to have the cameras/headset on 3.0 or 2.0. I prefer to run everything at USB 3.0, but it may not be necessary.

For USB 3.0 cable runs that are less than 10 feet (say, those corners nearest to your computer tower), use these passive USB 3.0 cables. You're also going to want a passive USB 3.0 extension for your Rift headset.

For USB 3.0 cable runs that are more than 10 feet away, you should use an active USB 3.0 cable. This is necessary for cameras that are further away from your tower. Note that the cable I linked has an optional barrel port for a 12V power supply. You only need to power these cables if you're daisy-chaining two or more of them in a row (for runs longer than (33 ft) or (10 m)).

These CAT6 round cable clips should work well for cable routing, especially for the slightly thicker active USB 3.0 cables. These general-purpose adhesive cable clips work fine for runs of the thinner, passive USB cables, but you may have issues with the adhesive depending on your wall.

You'll want this HDMI extension cable for your Rift headset, to make use of the extra space. I've had a good experience with bunching the HDMI and USB Rift headset extensions together by using these lightweight Velcro ties. I have about a (10 ft) or (3 m) square playspace, so you may encounter different problems than me if your playspace is larger. I only have three cameras, and it works fine. Good luck in your setup, I'm sure whatever you do will work great!

there’s a fuse box under the hood as well if that’s a better option. if you go for the interior fuse box, you can probably tuck the cord into the weather stripping on the door to get it out of the way. these are also really handy for keeping things neat

When I lived in an apartment, I used a bunch of these hooks on the walls and ceilings and ran cables around my apartment. I was single at the time so I easily got away with it. It's definitely not "significant other approved", but it works.

My computer is no where near the modem in my house, I just bought a 200 foot cable and ran it up the stairs to my room. Get one of those and some of these and you're golden

I also have a sit / stand desk but have my computer on a separate table to the side of it. Here's what i did!


My desk is ikea, and has a mesh cable management net mounted to the bottom. I found that the best thing to do was mount a big power strip to the bottom of the desk, and plug in all my accessories there. Then i only have the one power strip cable coming down from the desk underside, and goes down along the back of the table leg and plugs into my UPS that's on the floor. Then I mount all of the cables to the underside of the table with these guys (https://www.amazon.com/eBoot-Pieces-Adhesive-Management-Holder/dp/B01HR9VS4I/ref=lp_11042051_1_15?s=electronics&ie=UTF8&qid=1543598131&sr=1-15) . So I have a power strip next to the net, all the cables being plugged into the strip are being hidden by the net, but since the cables are mostly fastened to the underside, the net doesn't sag and stays mostly out of sight.


Since my computer is on a side table i use really long cables, and used one of these to go from the inside of the cable net to the back of the computer (https://www.amazon.com/Black-Split-Tubing-Cover-Marine/dp/B00J7SAHTK/ref=sr_1_3?s=electronics&ie=UTF8&qid=1543598333&sr=1-3&keywords=plastic+cable+sleeve). There are more modern looking ones, i just happened to like the "industrial" look of this one, if you could call it that...

​

Hope that helps! I know for me, once i got started seriously trying to take care of the cable situation, all the ideas on how to make it better just come to you as you are doing it. Figuring out where to start is often the hard part :D

what many people do, including myself, is mount the power strip under the desk with 3M tape then attach the power cables/usb with cable ties to these cable clips. I have two monitors so I just velcro zip tie the HDMI and DisplayPort together and run them behind my monitors through the monitor stand. Hope this helps out man.

I have reusable zip ties and they work wonders.
Edit: eBoot 100 Pieces Adhesive Cable Clips Wire Clips Cable Wire Management Wire Cable Holder Clamps Cable Tie Holder for Car, Office and Home https://www.amazon.com/dp/B01HR9VS4I/ref=cm_sw_r_cp_apa_vaa0Ab5BM94AY to use the zip ties don't know how they hold up yet only had them a year.

2nd slot up and top slot appear to be blocked off with blank panels? Why not put the Pis in some cases or a small wooden box and put them in the slots? Also clean the cables up and it’d look 100 times better.

Check these out too..

https://www.amazon.com/dp/B01HR9VS4I/ref=cm_sw_r_cp_awdb_t1_.lpWAbH8ESYA6

Or

https://www.amazon.com/dp/B072V1BYBF/ref=cm_sw_r_cp_awdb_t1_bnpWAbJ04TVZD

Sure.

https://www.amazon.com/eBoot-Pieces-Adhesive-Management-Holder/dp/B01HR9VS4I/ref=sr_1_2_sspa?keywords=adhesive+clips&qid=1562002349&s=gateway&sr=8-2-spons&psc=1

I did it inside for same reason you said, so no one can just randomly unplug. If you go to amazon you can find usb clips eBoot 100 Pieces Adhesive Cable Clips Wire Clips Cable Wire Management Wire Cable Holder Clamps Cable Tie Holder for Car, Office and Home https://www.amazon.com/dp/B01HR9VS4I/ref=cm_sw_r_cp_apa_i_rgFtDbHG6W5AR or Cable Matters 200-Pack Nail-in Cable Clips Cord Organizer https://www.amazon.com/dp/B00Y362HSA/ref=cm_sw_r_cp_apa_i_RgFtDb9EMJH2Y

i used cable clips for underneath my table and 3m tape to fix the heavy stuff. i clued my power strip on the table aswell and used cable holders like these: https://www.amazon.com/eBoot-Pieces-Adhesive-Management-Holder/dp/B01HR9VS4I/ref=sr_1_3?ie=UTF8&qid=1519510896&sr=8-3&keywords=cable+clips&dpID=61pqcWe8Y%252BL&preST=_SY300_QL70_&dpSrc=srch

That's exactly what I did though I physically screwed the router and surge suppressor into the desk. I also drilled a hole underneath the mousepad where my mouse, keyboard, and orbweaver go underneath.

I further mounted usb hubs underneath the desk both for access and to limit the number of cables going out of the desk to the PC. Attached to these hubs are mounted retractable usb cables for things like my controller, my headset, and a mount for my phone.

This is the single best money you can spend on cable management. These things are amazing.

I used these 100 for $5.

If I did it again I'd look for black adhesive instead of white since I installed it against the black windshield boarder.

But for $6 I have a bunch of clips.