Reddit Reddit reviews Environmental Technology 16-Ounce Kit Casting' Craft Casting Epoxy, Clear

We found 7 Reddit comments about Environmental Technology 16-Ounce Kit Casting' Craft Casting Epoxy, Clear. Here are the top ones, ranked by their Reddit score.

Environmental Technology 16-Ounce Kit Casting' Craft Casting Epoxy, Clear
Package contains Net 1 LBComplete Instructions and project ideas enclosedPlease read cautions on individual containers carefullyClear casting epoxyIdeal for polypropylene or rubber moldsLow odor; solvent freeEasy to use 1 to 1 ratio, two-component16-Ounce kit
Check price on Amazon

7 Reddit comments about Environmental Technology 16-Ounce Kit Casting' Craft Casting Epoxy, Clear:

u/Alexm920 · 5 pointsr/magicTCG

They're glow-in-the-dark! I used a two-part resin and some glow powder and carefully piped that mix into the wood.

u/Princess_Dank · 3 pointsr/microgrowery

I'm not OP but I've done similar projects. I like to recommend this 16-ounce kit for people who haven't done much with resin before because it's a smaller amount and unlike many other brands can be resealed and stored for awhile.

u/Rank2 · 3 pointsr/TerrainBuilding

The brand I use is EasyCast, a two part one-to-one clear resin. Not the worlds best quality, but for effects like these it's perfectly fine. A 16-ounce set costs about $16.86 on Amazon right now.

http://www.amazon.com/gp/aw/d/B000GBT8V0/ref=mp_s_a_1_2?qid=1456844322&sr=8-2&pi=AC_SX236_SY340_QL65&keywords=clear+resin

u/punkonjunk · 2 pointsr/MechanicalKeyboards

Not hard at all! I should consolidate some of the information shared with me, and that I've shared with others at some point. I'd love to see a r/artisanexchange get set up for folks to talk about resin casting. There is some r/resincasting sub, but it's pretty dead, and the vast majority of discussion and guides on youtube deals with old lady crafters - the middling quality is acceptable sort who measure things by volume.

But I'm also lazy and don't want to be in charge of anything.
In short though, what you want is Smooth-on Mold Star 30, and some easycast.

I originally used this guide: https://geekhack.org/index.php?topic=23722.0

But skip the sprue! As for the keys, the little dots to line it up - you can carve a dot in with an xacto knife, or a scalpel. (also available on amazon) and then backfill your top half.

What I started with was drilling out a sprue channel above the "walls" and directly next to the "plus" shape to fill effectively around it, although this set, I actually cast the plus separately with the clear top layer, then cast on top of that and set them up together, and that worked out great! You can also use sprue wax to make sprues and have big wide fill holes/air escapes on the keys. (that is another artisans photos, I do not recall who, I found it on his website)
The escape hole is great for letting bubbles out, and making sure you can totally fill in your casting. (I usually use a syringe)

If you have a decent oven or kiln, you can bake the easycast in the moldstar mold for 60 minutes at 250. Then let it cool for at least an hour, or until the mold is warm to the touch but not hot - then you can demold and easily trim the excess while it's warm. Cuts a whole day out of the process, and results in harder resin - but if you go over 300, the resin browns, and is weaker.


Thats some basic information. Some folks use only these methods, and that's what I've used, but it has resulted in some bubbles. I'm going to start seeking more professional equipment - hand built mold boxes to size, and a pressure pot (to crush bubbles while it sets) and a vacuum chamber (to suck bubbles out of the molds and the slow-curing resins)

Eventually, I want to slap all this information together. I'm an experimenter by nature, and I used to do lost wax casting so a lot of this plays into that, and back and forth. down the road, I should even be able to offer 18K, 999 sterling and copper, etc solid keycaps!

If you have some disposable income, it's worth trying, if nothing else to show how crazy easy it is. Look at how crazy folks are for stuff like fungikey and those brocaps - although they probably have professional equipment, they likely started the same way, and probably still produce out of a basement or garage.

u/Hosteen_Coyote · 2 pointsr/Warhammer

I purchased a clear 2-part epoxy resin and I've had great success with it. You can mix a little bit of wash in to tint it, too. You can see my first attempt here. The waves are done using a paste intended to give texture to oil paint, but it's shapeable and dries clear.

u/HamsterFarm · 1 pointr/Random_Acts_Of_Amazon

This is the mold I used!

Non yellowing epoxy that's not exactly the epoxy I used because we had some in the house but this is a good one I've heard that it takes a bit longer to dry though

[and this tutorial helped me a lot] (https://youtu.be/Ehw6B1GnXP0)

:D

u/ImRightImRight · 1 pointr/pics

This stuff?

https://www.amazon.com/Environmental-Technology-16-Ounce-Casting-Craft/dp/B000GBT8V0

Good to know...most of what I've used looks greats, even if colored, then turns yellow.