Reddit Reddit reviews Environmental Technology 8-Ounce Kit Casting' Craft Casting Epoxy, Clear

We found 11 Reddit comments about Environmental Technology 8-Ounce Kit Casting' Craft Casting Epoxy, Clear. Here are the top ones, ranked by their Reddit score.

Environmental Technology 8-Ounce Kit Casting' Craft Casting Epoxy, Clear
Complete Instructions and project ideas enclosedIdeal for small casts (6 ounces or less)Measure equal amounts of resin and hardener then mix.Add colorants, granite powders or found objects, pour into mold and allow to cure.Cast you own decorative knobs, and pulls, jewelry pieces, pendants, charms and buttons, coasters, paperweights, figurines and more.
Check price on Amazon

11 Reddit comments about Environmental Technology 8-Ounce Kit Casting' Craft Casting Epoxy, Clear:

u/[deleted] · 6 pointsr/pokemon

or you could just make them

u/sockmonkeyboxinglove · 4 pointsr/CrossStitch

This is the stuff I've had good results with, but it comes in fairly small bottles so if you're looking at a larger project, it may be more cost prohibitive than a larger bulk option.

u/duckingcluttered · 3 pointsr/crafts

Thank you :) I use this (but bigger version): http://www.amazon.com/Environmental-Technology-8-Ounce-Casting-Craft/dp/B000XAR0DM

You do get problems with air bubbles but the key is making sure you're working in a room at least 70 degrees. It also helps to situate the piece under a desk lamp with an incandescent bulb that throws off heat. It'll bring bubbles to the surface and then you can use a lighter to pop them if they haven't popped naturally.

I'll admit to being impatient and not always working slowly to fully avoid bubbles but that helps me minimize them. Feel free to ask me anything and I'll also be more than happy to give you tips :)

u/amoebicArtiste · 3 pointsr/Random_Acts_Of_Amazon

I got out my tablet to draw this sweet-ass masterpiece. Behold the glory.

I want this because I like doing craft stuff and resin casting looks like fun. Here it is on Amazon.
Thanks for the contest!

u/fut- · 3 pointsr/ResinCasting

Try hobby epoxy resins like EasyCast:

http://www.amazon.com/Environmental-Technology-8-Ounce-Casting-Craft/dp/B000XAR0DM/

They are fairly simple and user-friendly. Not very cheap per gallon, but OK for small projects like this. You can use powdered pigments from crafts stores with that.

u/_joe_king · 2 pointsr/MechanicalKeyboards

The trans is this one here

u/ohaitharr · 2 pointsr/ResinCasting

http://www.amazon.com/dp/B000XAR0DM/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=2P2AXN2CJW43B&coliid=I38M88LVK24A6M

This will get you 16 ounces of pieces.

http://www.amazon.com/dp/B000IFBFXI/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=2P2AXN2CJW43B&coliid=I2BQM9YBC7NEMB

100 medicine cups

http://www.amazon.com/dp/B009EE2XH6/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=2P2AXN2CJW43B&coliid=I3PMYD232KRJ80

Craft sticks


http://www.amazon.com/dp/B00A29IRMW/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=2P2AXN2CJW43B&coliid=I198B32Y5ZVQ1S

Nitrile gloves.

http://www.amazon.com/3M-8211-Particulate-Respirator/dp/B0056CG2S6/ref=sr_1_42?s=hi&ie=UTF8&qid=1419877708&sr=1-42&keywords=face+mask

Respirator, I also try and work outside when possible. Resin has seriously messed up my lungs before I used a mask. Some people probably don't use them, but the things I make require me to be close to my pieces.

These are the items I use for resin, I make jewelry and cabochons. (My mask is different.)
I've read / heard that latex isn't supposed to be used as gloves as it can interact with the chemicals in the resin. You're more than likely able to find the sticks, gloves, and cups in your local area for cheaper, and you won't have to cover shipping. Dollar store cups should work.

I just realized your Amazon list is from the UK. All of the links I posted above are from the US so I'm not sure if everything is sold in your area.

Have you ever researched resin making on Youtube? There's TONS of UK Youtubers who make resin things that will post links to stores they purchase from and give great tips. I can post some if you'd like.

Of course as the previous commenter posted, you'll need to grab molds, which can be found pretty decently priced on eBay.

I haven't been using resin for a super long time (maybe a year?) so there might be more experiences people who can give better advice, but this is what I use and my experience.

u/pollywogbean · 2 pointsr/DnDIY

There are glue sticks that set more clear. Also use a lot less. Then hit it with a heat gun to get it to smooth out. Otherwise you can buy some clear casting resin.

u/pirate_smurf · 1 pointr/chastity

I bought this, and it was exactly as you said. Taped the inside, and filled from the outside. It's a little tricky, because the tube doesn't sit quite flat, so I had to prop it somewhat. You also have to do it two times, once for each side.

As far as ventilation, it made no difference, as my cock fills the tube (hence all the skin popping out). I didn't have to sandpaper a thing. Once it dried, and I peeled the tape off, it was a nice smooth finish.

u/Guerdonian · 1 pointr/painting

This video might give you a better representation
https://www.youtube.com/watch?v=dSvWMUZCjRc
Its not me.

So the way i did it was finding the little wood sake baxes
http://www.amazon.com/Square-Wood-Sake-Box-masu/dp/B0006LRSX0/ref=sr_1_1?ie=UTF8&qid=1422547366&sr=8-1&keywords=square+wood+saki&pebp=1422547368189&peasin=B0006LRSX0

Resin:
http://www.amazon.com/Environmental-Technology-8-Ounce-Casting-Craft/dp/B000XAR0DM/ref=sr_1_1?ie=UTF8&qid=1422547416&sr=8-1&keywords=resin&pebp=1422547413091&peasin=B000XAR0DM

I started with epoxy, but did polyester for the next one which worked just as well

First I applied a layer of resin on the bottom, thickness here doesn't matter. Then painted the first layer of the fish, fins primarily, and belly and head, second layer was if you took another cross section slice, this incorporates more lighter colors, this middle layer you can do more than just one. Final layer are just extra light paints to make the shine. Each layer is painted, let dry, and the a small layer of resin is poured over the top. Critical thing here is to keep everything dust free, you get a cat hair in there, its in there for good.

It takes your brain a few tries to wrap your head around the shading and the layers, I was really excited to try it, and it gave me even more respect for the artists that are good at it.

u/Fullmetal1982 · 1 pointr/beadsprites

Sorry it took me so long to reply. Haven't been on in awhile.
http://www.amazon.com/Environmental-Technology-8-Ounce-Casting-Craft/dp/B000XAR0DM/ref=sr_1_1?ie=UTF8&qid=1417157386&sr=8-1&keywords=resin

That's a link for the resin I used. Then it's just perler beads and glitter.