Reddit Reddit reviews Etekcity Bluetooth Receiver, NFC-Enabled Bluetooth Audio Adapter for Music Streaming Sound System, Bluetooth Transmitter for Receiver A/V RCA and Car Stereo 3.5mm AUX Input, Unify

We found 25 Reddit comments about Etekcity Bluetooth Receiver, NFC-Enabled Bluetooth Audio Adapter for Music Streaming Sound System, Bluetooth Transmitter for Receiver A/V RCA and Car Stereo 3.5mm AUX Input, Unify. Here are the top ones, ranked by their Reddit score.

Home Audio Receivers & Amplifiers
Electronics
Audio Component Receivers
Home Audio
Home Theater Audio
Etekcity Bluetooth Receiver, NFC-Enabled Bluetooth Audio Adapter for Music Streaming Sound System, Bluetooth Transmitter for Receiver A/V RCA and Car Stereo 3.5mm AUX Input, Unify
STREAM WIRELESSLY Add bluetooth compatibility to devices that don't have bluetooth by connecting the Roverbeats Unify Bluetooth Audio Receiver to your high-quality speakers headphones home/car stereo sound systems or any devices with A/V RCA and 3 5mm AUX/jack inputNFC CAPABILITY Amplify the audio of your NFC-capable smart devices with a simple hand gesture by touching your smartphone or tablet to the bluetooth adapter and connectRAPID RECHARGE Recharge time of two hours On a full charge you can enjoy up to ten hours of operationCOMPACT DESIGH Made to be mini and lightweight that you can easily tuck it away and travel with itNOTE Extend your bluetooth wireless range up to 33 feet Do not use adapters above 5V to charge the receiver
Check price on Amazon

25 Reddit comments about Etekcity Bluetooth Receiver, NFC-Enabled Bluetooth Audio Adapter for Music Streaming Sound System, Bluetooth Transmitter for Receiver A/V RCA and Car Stereo 3.5mm AUX Input, Unify:

u/the_blue_wizard · 6 pointsr/audio

Two quick and easy options -

1.) Bluetooth Receivers - these are no that expensive, and will allow you to connect your phone to the Amp WIRELESSLY, and you can play as long as your phone is within 30feet. You can find many of these on Amazon US or UK or anywhere. They are very common and very reasonable priced.

https://www.amazon.com/Etekcity-Wireless-Bluetooth-Receiver-NFC-Enabled/dp/B00KXYXXK2

https://www.amazon.com/Logitech-980-000910-Bluetooth-Adapter-Streaming/dp/B00IQBSW28

https://www.amazon.com/Avantree-Bluetooth-Transmitter-Receiver-Headphones/dp/B00LAZ6RTW

2.) Headphone Out - Get a simple 3.5mm Stereo cable to two RCA connectors. Plug the 3.5mm into the Headphone Jack of the Phone and the RCA into one of the unused inputs on the amp. Select the Input on the Amp Selector Switch, and adjust the volume until you can hear the sound.

https://www.amazon.com/AIFFECT-3-5mm-Stereo-Audio-Adapter/dp/B01GZRMO7S

u/spadmin · 5 pointsr/technology

And it’s so nice to not have to get tangled in wires.

At this point I don’t see what the benefit to wired is unless you have a $1000 headset

And if that’s the case there’s a $20 adapter to solve that issue

Etekcity Wireless Bluetooth 4.0 Receiver Audio Adapter (NFC-Enabled) for Sound System https://www.amazon.com/dp/B00KXYXXK2/ref=cm_sw_r_cp_api_F--LBbSP6KZJV

u/RedemptionX11 · 3 pointsr/CarAV

There are tons of options. Just search 3.5mm or aux to Bluetooth adapter. You'll find stuff like this. Lots of different devices for different prices.

Etekcity Wireless Bluetooth 4.0 Receiver Audio Adapter (NFC-Enabled) for Sound System https://www.amazon.com/dp/B00KXYXXK2/ref=cm_sw_r_cp_apa_rbMpybDZHREWJ

u/Echo123321 · 2 pointsr/amazonecho

Why aren't you able to send audio straight from the Fire TV to the AirPods? A google search shows people doing exactly that, using the Fire TV's Bluetooth pairing setup and the AirPod's setup button. Instructions:

>With the AirPods in the charging case, open the lid.

>On the back of the case is a small button, press and hold it for a few seconds.

> Once the indicator light between the earbuds begins blinking white, let go.

> The AirPods will show up in the pairing menu on your device, select them and follow any prompts.

https://www.cnet.com/how-to/how-to-pair-airpods-with-an-android-device/

Another choice is a Bluetooth receiver with a 3.5 mm headphone output, like this:

https://www.amazon.com/Etekcity-Wireless-Bluetooth-Receiver-NFC-Enabled/dp/B00KXYXXK2

As for using the Echo Dot as a relay, I don't believe that's possible, because I think it can only have one active Bluetooth connection at a time.

u/cswimc · 2 pointsr/DIY

Searching around I found this forum post where the OP added a bluetooth board internally to an iPod Classic 5g. It looks like that would include some soldering, but it is doable. I'm not sure if it would all fit in the case with the battery I used.

Alternatively, you could get an external bluetooth receiver like this one. Then you have options and can connect it to any device that has a 3.5mm headphone jack that you want to use with bluetooth. The downside there is you now have 2 devices to charge.

u/tonyviv · 2 pointsr/BudgetAudiophile

I've used this one in a couple systems and would recommend http://www.amazon.com/dp/B009OBCAW2/. Another budget option that's popular is http://www.amazon.com/dp/B00KXYXXK2/.

u/massivewang · 2 pointsr/infiniti

I had an 08 g35x, I used a Bluetooth adapter like this one in my car. I plugged it into the rca port in the car and powered it via USB if I recall correctly. Worked great.

Etekcity Wireless Bluetooth 4.0 Receiver Audio Adapter (NFC-Enabled) for Sound System https://www.amazon.com/dp/B00KXYXXK2/ref=cm_sw_r_cp_api_ajzDybN0XX6GC

u/Rrussell2060 · 1 pointr/BudgetAudiophile

Before I make a recommendation I would ask that you read the sidebar: What is /r/budgetaudiophile about? Your budget is quite low, if you can increase your budget to $120 I would suggest something like these Edifier R1280T Powered Bookshelf Speakers - 2.0 Active Near Field Monitors - Studio Monitor Speaker - Wooden Enclosure - 42 Watts RMS
Link: https://amzn.com/B016P9HJIA and this Etekcity Wireless Bluetooth 4.0 Receiver Audio Adapter (NFC-Enabled) for Sound System Link: https://amzn.com/B00KXYXXK2

u/sk9592 · 1 pointr/hometheater

Ok, so these would be my recommendations for that price range:

Amplifier ($64) - https://www.amazon.com/gp/product/B003OELGGG/

This is a very reasonable amp for the price. It is pretty good sound quality for this price range. It also has three RCA inputs in the back, and a 3.5 aux input in the front. This allows you to connect up to 4 different audio sources to it. It seems like you want to have several difference sources, so that's good.

This amp provides 120W per channel @ 4ohms. That means for a typical 8ohm bookshelf speaker, you're looking at 60W per channel. That means it can get really fucking loud.

Speakers ($65) - https://www.amazon.com/gp/product/B002RMPHMU/

These are actually excellent bookshelf speakers for the price and several times better sound quality than the ones you originally linked to. These come with speaker cable, so you don't need to buy that separately.

USB Charger ($11) - https://www.amazon.com/gp/product/B01LCDJ7LG/

You wanted USB charging for an iPhone/iPad. This Anker charger is very high quality and provides 2.4 amps to each of its two USB ports. That means it will charge two iPads at full speed, and charge an iPhone significantly faster than the cube charger that it comes with.

Bluetooth Receiver ($23) - https://www.amazon.com/gp/product/B00KXYXXK2/

Pretty self explanatory. It receives bluetooth audio from a phone/tablet/laptop and sends it to the amp. It can be connected to the amp through a 3.5mm to RCA cable. It is also NFC enabled so it can pair with Android phones super easily.

CD Player ($35) - https://www.amazon.com/gp/product/B007F9XHBI/

With was actually pretty tough. No one seems to sell stand alone CD players anymore. There is no market for them. You might as well plug in a portable CD player. The next best option is to plug in a DVD player through RCA audio cables (the red and white ones). It might seem silly, but it works just fine. You don't need to plug into a TV at all, since there are playback controls on the DVD player itself, and the small screen on it will tell you track info. Honestly, there is no point in buying a new one. If you have an old DVD/CD player laying around the house or can buy one on Craigslist for $10, go for it.

Record Player ($99) - https://www.amazon.com/gp/product/B008872SIO/

Recored playback seemed to be kinda optional for you, so this will take you over budget a little. However, I already mentioned, all-in-one systems with a record player built-in sound terrible and ruin your records. The record player I'm suggesting really is the cheapest decent one you can buy new. It's the one to get if you care about good sound quality and not ruining your records.

This nice thing about this set-up is that it's completely modular. Over the years, you can upgrade or replace individual components without trashing the whole thing.

Let me know if you have any questions about these components or anything else.

u/tugrumpler · 1 pointr/NoStupidQuestions

I've dealt with this and unless your car has a unique radio (Volvo, Lexus, etc) that cannot be replaced you're better off installing a new radio. Adding a Bluetooth receiver and tape adapter is fiddly at best.

That said the XM radio tape adapter is less than $5 and works superbly. Plug it into a good $20 bt receiver and your set.

I've used this receiver for 2 years, it connects flawlessly and fast to iphone6 and Amazon Fire. https://www.amazon.com/gp/aw/d/B00KXYXXK2?psc=1

u/badawfulperson · 1 pointr/motorcycles

I actually do this the other way around. I have a bluetooth receiver so I can play music on my phone and I have corded headphones which plug into the receiver in my pocket. I do turn by turn directions too so my phone is both my stereo and GPS. Saves me a ton of money and hassle. My set-up:
https://www.amazon.com/gp/product/B00S59GJKI/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
https://www.amazon.com/Etekcity-Wireless-Bluetooth-Receiver-NFC-Enabled/dp/B00KXYXXK2/ref=sr_1_4?ie=UTF8&qid=1478532287&sr=8-4&keywords=bluetooth+receiver

u/ShadeezBack · 1 pointr/appletv

In keeping with Apple's style, I doubt they'd implement that.

You can also use a Bluetooth receiver with 3.5 mm headphone jack output (AmazonBasics, Etek) and a splitter.

u/grevenilvec75 · 1 pointr/BudgetAudiophile

You can get a bluetooth transmitter and a receiver that will allow you to use any headphones you want.

There are some that are both in a single package (don't buy that one though, its garbage. Doesnt support apt-x codec and doesnt say if its bluetooth 4.0, which means it probably isnt).

You'd have to buy two of them though, which can get pricey.

Another option is to add bluetooth to your PC using something like this and then using a bluetooth receiver like this that you plug your headphones into.

Note that I've never used any of these devices except for the kinivo usb dongle. It works pretty well, and I believe that the video on my phone synced up pretty well with the audio that was being sent to my PC. But, like I said, you should try before you buy if at all possible.

u/jefesteeze · 1 pointr/audiophile

Bluetooth speakers aren't great. I'd get the $120 setup in the top of the thread (but maybe use the new model SMSL amp instead, the A2) and add a Bluetooth dongle, something like: https://www.amazon.com/Etekcity-Wireless-Bluetooth-Receiver-NFC-Enabled/dp/B00KXYXXK2/

My sister asked for a Bluetooth speaker for her birthday, and I got her that setup instead. She was blown away by the sound quality improvement over her crappy little Bluetooth speaker she was looking to replace. It will destroy the Bose Revolve in sound quality and come in under the price, the downside is that it isn't very portable.

u/QARunner · 1 pointr/pelotoncycle

I have tried the tablet speakers, Bluetooth earphones and external speakers. As others have pointed out, the tablet speakers are mediocre. Bluetooth earphones work well but I find them irritating. I ended up buying a Bluetooth receiver ($23 - see link below) and connected it to external powered speakers (AudioEngine A2+). They are small speakers but they were the only size that fitted in the space I had available. I use them with a sub woofer I had lying around. If you go Audio Engine, I would go with the A5+ which are expensive ($390). Amazon has other powered speakers in the $100 - $150 range. I tried to connect powered speakers to the headphone jack on the tablet but found the system clicks very loud relative to connecting via Bluetooth

https://www.amazon.com/dp/B00KXYXXK2/ref=cm_sw_r_cp_dp_T2_4aavzbVVPP63E

u/kallisti_gold · 1 pointr/AskElectronics

I use this at work.

Etekcity Wireless Bluetooth 4.0 Receiver Audio Adapter (NFC-Enabled) for Sound System https://www.amazon.com/dp/B00KXYXXK2/ref=cm_sw_r_cp_apap_wZx6iUYy58U8m

u/dontgetaddicted · 1 pointr/AndroidTV

How about something like this? https://www.amazon.com/dp/B00KXYXXK2/ref=cm_sw_r_cp_ep_dp_w8LWAbH703BJB

Turn the 3.5mm headphones into Bluetooth.

u/lattiboy · 1 pointr/BudgetAudiophile

Don't forget, the receiver doesn't have Bluetooth. You can get a chromecast audio for 25 bucks at Best Buy right now. It works with most streaming services, and doesn't have the limitations of Bluetooth (range, audio degradation)

Otherwise, you'll need to buy a BT receiver like this:

Etekcity Wireless Bluetooth 4.0 Receiver Audio Adapter (NFC-Enabled) for Sound System https://www.amazon.com/dp/B00KXYXXK2/ref=cm_sw_r_cp_api_m616xbV7ZKTTV

u/rickman1011 · 1 pointr/audiophile

For a $100 budget you're pretty limited as far as a custom installed setup. Have you considered a bluetooth speaker that you could hard wire power to?

If you're dead set on an installed system you'd have to scour the used market, find a pair of outdoor weatherized speakers, run wire to them from a cheap amp/receiver, and use a bluetooth A2DP dongle receiver, probably best to purchase off amazon.

This being said, I honestly wouldn't recommend it. I think you'll save yourself a huge amount of time and energy just getting the best portable bluetooth speaker you can afford.

u/adaminc · 1 pointr/motorcycles

Right now, regular plugfones, at least the ones I'd use, are $30.

http://www.amazon.com/Plugfones-Contractor-Improved-Headphones-Silicone/dp/B00RC4OEO0/ref=sr_1_3?ie=UTF8&qid=1464285471&sr=8-3&keywords=plugfones

You can pick up a cheap bluetooth receiver as well for $20, and be able to wirelessly transmit audio to the ear buds.

The bluetooth version of Plugfones, when they are released, will be $99.

u/gambris · 1 pointr/bluetooth

I believe you want a 3.5mm bluetooth transmitter for the headphone jack and a 3.5mm bluetooth reciever for the microphone jack.

u/tvtoo · 1 pointr/appletv

Ah that sucks.

On a sidenote, you mentioned that you like having two sets of headphones for the audio.

Would another solution be an Bluetooth audio receiver (like this one from etekcity or from AmazonBasics) with a 3.5mm audio splitter and two headphones/earphones?