Reddit Reddit reviews EXEDY KMZ03 OEM Replacement Clutch Kit

We found 6 Reddit comments about EXEDY KMZ03 OEM Replacement Clutch Kit. Here are the top ones, ranked by their Reddit score.

Automotive
Replacement Parts
Automotive Replacement Drive Train Parts
Automotive Replacement Clutches & Parts
Automotive Replacement Complete Clutch Sets
EXEDY KMZ03 OEM Replacement Clutch Kit
Japans largest original equipment manufacturer supplying all eleven Japanese manufacturers with their powertrain needsSpecified OEM equipment worldwide and manufactured to meet or exceed the recommended manufacturers torque ratingsAll product designed using the latest technology and innovations and built with the highest quality materialsManufacturing operations go beyond national borders and to ensure optimal materials procurement and production standardsDurability by advanced engineering in majority of Japanse applications we are the original manufacturer and the standard has been set by Exedy
Check price on Amazon

6 Reddit comments about EXEDY KMZ03 OEM Replacement Clutch Kit:

u/cowthegreat · 8 pointsr/Miata

This happened to me this past winter. Exact same noise. It's the pilot bearing, which is probably frozen onto the input shaft of the tranny at this point. All you need is a new clutch. A great OEM style clutch is the EXEDY KMZ03. I used it on my 1999 and it feels great and has great reviews for longevity.

If the pilot bearing IS frozen onto the input shaft, you will know that when you try to pry the trans off of the block, and it won't go much past 3/4 of an inch. This took me weeks to figure out what was going on in the bell housing, but if you sneak a wrench through the hole that the clutch lever goes into, you can unbolt the clutch spring assembly from the pressure plate and that will allow the trans to be removed. Be very careful not to torque the trans too much when prying, as you can bend the input shaft which would leave you without a trans.

I used a Dremel cutting wheel to cut the pilot bearing off of the input shaft once I got the transmission off of the block.

I hope this helps! Feel free to PM me if you need any info or pictures etc.

Edit: You will also want to get a new flywheel, or get your existing one resurfaced, depending on its wear.

Here is the link for the clutch kit, it is on sale on Amazon. Note that it does not include the flywheel, but includes all of the other necessary bearings and parts.

u/verch101 · 3 pointsr/Miata

Throw out bearing. Save up for the stock replacement excedy clutch. It's 100$.

http://www.amazon.com/gp/aw/d/B001B5DS7K?pc_redir=1410435831&robot_redir=1

Check your year, 1.6 used a different clutch.

u/murica_ftw · 3 pointsr/Miata

Labor sounds about right - 4 hours total work.

Your clutch kit is about $7 cheaper than my NA6 OEM clutch kit, however your kit still shouldn't cost over $300 (for an OEM kit), that's just ridiculous.

u/Princze · 3 pointsr/Miata

Aaah, 1300$ is way too much for that, my mechanic guy never saw a miata before, and he could do the job without a fuss. The miata is famous for being easy to work on. Was that OEM parts for 450$? Exedy kits are going for 120$-200$, lots of us are going with exedy

http://www.good-win-racing.com/Mazda-Performance-Part/15-1014.html

https://www.amazon.com/EXEDY-KMZ03-OEM-Replacement-Clutch/dp/B001B5DS7K

u/KitoJManny · 2 pointsr/Miata

Sounds weird to say "go to Amazon" for car parts, but this is the lowest price I've found for the Exedy: http://www.amazon.com/EXEDY-KMZ03-OEM-Replacement-Clutch/dp/B001B5DS7K/ref=sr_1_1?ie=UTF8&qid=1377818936&sr=8-1&keywords=Exedy+KMZ03

u/MM320 · 2 pointsr/Miata

This one. Feel free to PayPal me the price difference! :P

https://www.amazon.com/EXEDY-KMZ03-OEM-Replacement-Clutch/dp/B001B5DS7K