Reddit Reddit reviews FastRack 1 Gallon Glass Widemouth Jar, Clear

We found 12 Reddit comments about FastRack 1 Gallon Glass Widemouth Jar, Clear. Here are the top ones, ranked by their Reddit score.

Kitchen & Dining
Home & Kitchen
Home Brewing & Wine Making
Brewing & Fermentation Equipment
Brewing & Fermentation Fermenters
FastRack 1 Gallon Glass Widemouth Jar, Clear
Glass to avoid absorption of flavors and leaching of chemicalsUSDA certified food gradeNOT heat-treatedWith Plastic Cap which does not corrode like metal lidsGreat for fermenting!
Check price on Amazon

12 Reddit comments about FastRack 1 Gallon Glass Widemouth Jar, Clear:

u/renkluaf · 3 pointsr/Kombucha

As was already stated, definitely use glass as plastic and metal will both have adverse effects on your brew. The only thing I have to add is a recommendation for one to buy. Good luck!

u/inzeos · 3 pointsr/Kombucha

I would recommend starting with a jar like this;

https://www.amazon.com/1-gallon-USDA-Fermentation-Glass-Jar/dp/B006ZRBGSC/ref=sr_1_8?ie=UTF8&qid=1524584912&sr=8-8&keywords=kombucha+1+gallon+jar

You won't need the top; however, it's nice to store for later use of the jar.

Add to that a standard coffee filter and an elastic to keep it on the jar.

It has a 1 gallon volume so you can follow the subreddits suggestion for a master recipe;

https://www.reddit.com/r/Kombucha/comments/5b1ztm/reddit_master_kombucha_recipe/

If it tends to be cold where you are < 75 F ambient temperature you may want to consider also snagging one of these;

https://www.amazon.com/VIVOSUN-Waterproof-Hydroponic-Fermentation-Germination/dp/B073PTZCJ4/ref=sr_1_4?ie=UTF8&qid=1524584986&sr=8-4&keywords=kombucha+heater

If you are sourcing something used, please be sure to know what was in it before and clean it appropriately and then rinse it to insure no antibacterial or other cleaner residues reside, which could hinder the yeast and or bacteria from thriving.

Many folks prefer to have more surface area for the pelical to grow and find that it speeds up the over all process along with having appropriate temperatures.

Good luck!

u/crazyguyonabike · 3 pointsr/preppers

Yeah, I agree. Ceradyn is a great option, thanks for bringing it up. For reference, they are available on Amazon:

http://www.amazon.com/Katadyn-Drip-Ceradyn-Water-Filter/dp/B0007U010W/

Actually the Gravidyn is a tiny bit cheaper - this is the one I have:

http://www.amazon.com/Katadyn-Drip-Gravidyn-Water-Filter/dp/B0007U011G/

For anyone who's wondering, yes, the two systems are identical except for the filters that come with. You can put Ceradyn filters in the Gravidyn setup, and vice versa.

The filters are quite delicate, though, and prone to cracking and breakage. You need to inspect them carefully for hairline fractures when you get them. For example, one of the ones in my Gravidyn was broken on arrival. I convinced Amazon to send me a spare one (rather than having to send the whole system back). Also, when I was moving stuff around in one of my storage closets in the garage, I accidentally dropped one of the spare Gravidyn filters on the concrete floor. It was inside its protective cardboard box, but it still broke. I was heartbroken - such a waste of money from a moment's clumsiness. Make sure to treat these things with kid gloves!

For completeness, here are the spare filters - Gravidyn:

http://www.amazon.com/Katadyn-20720-Gravidyn-Replacement-Element/dp/B0007U011Q/

And Ceradyn:

http://www.amazon.com/Katadyn-Ceradyn-Replacement-Filter-Element/dp/B0007U0116/

Hope it's ok posting links like this... I have no stake, not connected with the company at all etc.

The Monolithic filters are also interesting, and they claim to remove arsenic and lead as well. I would be concerned with arsenic in the surface water around here, though it might only be something that is in ground water (i.e. from wells etc). Anyway, these are very simple and cheap too, you can make a bucket filter around one of these little things and have a basic system. I don't know how much formal testing they have had, but they seem to be used a lot in 3rd world countries.

http://www.monolithic.org/water-filters

http://www.monolithicmarketplace.com/collections/frontpage/products/just-water-ceramic-drip-filter

As I said earlier, if I ever have to use the creek water, then I intend for the Monolithic to be the first stage, then treat with calcium hypochlorite (pool shock - 78% TurboShock from Poolife is the best I've found), then treat again with the Katadyn to remove the chlorine and just do another round of filtering in general. I figure I should be covering my bases with this.

http://www.amazon.com/POOLIFE-Poolife-TurboShock-1-lb/dp/B0017SSFU6

And also in case anybody's interested: To treat water with calcium hypochlorite, first make a bleach solution (NOT FOR DRINKING!) by adding a heaped teaspoon to 2 gallons of water. Then you can treat drinking water with this by using 1:100 ratio (i.e. for every 1 part bleach solution, 100 parts water). This should make it obvious that the calcium hypochlorite is pretty concentrated stuff - you shouldn't be trying to treat drinking water directly. First make the solution, then use that to treat the water. For reference, the 1:100 ratio translates into roughly 2.5-3 tablespoons of solution per gallon of drinking water, or 3/4-1 cup to every 5 gallons of water (if you're treating by the bucket). I give a range since it might be easier to measure 3 tablespoons and 1 cup rather than fractions like 2.5 and 3/4, and I think it's probably true that a little over treatment won't do any harm, especially if you are filtering it out anyway. Let the water stand for at least half an hour when treating, the longer the better. Contact time is important for killing the viruses etc.

Also, the pool shock is hard to store safely, since it produces chlorine. Anything metal will get corroded over time. The best method I have found is to use the mason jars with the metal canning lids (the ones that come in two parts). The 1 lb packs of TurboShock fit nicely in a 1/2 gallon jar. I know the lid is metal, but it has a plastic coating on the inside, and those lids are the best sealing I have found. I can put three jars inside a plastic 5 gallon bucket that has been sealed with a Gamma spintop lid. Then I can check on them every few months, and I'll know immediately if the jars have been leaking inside the bucket, because you'll be hit with the chlorine as soon as you open the bucket. I figure if the metal lids start rusting, then I'll just see what their safe lifetime is, and treat them as consumable items. A box of lids is only a few bucks, so replacing them every six months or year or whatever is no big deal. I also wrap the jars inside the bucket in bubble wrap, just so they won't break against each other if things are thrown around during an earthquake. With 3 lbs of the calcium hypochlorite, I'm ready to disinfect a LOT of pond water! Maybe also useful as bartering material in the event of a long term service outage, you never know.

Oh, and one last thing - I got a set of long handled measuring spoons, so that I will be able to reach inside the jars to get the pool shock out without having to tip them up or whatever, risking getting this toxic substance on my skin or in my eyes (big nope).

http://www.amazon.com/ChefLand-Set-Sizes-Stainless-Ingredients/dp/B00AEUR6K8

I know metal isn't good with calcium hypochlorite, but I'm not storing them with the stuff and their contact time will be minimal, and I'll be washing them after each use. I just figure it's useful to try to consider the practicalities of how you will use stuff in reality... also, I'll probably not make 2 gallons, but rather only 1 gallon at a time, which will mean a heaped 1/2 teaspoon of pool shock. And how to store the bleach solution? I found some nice 1 gallon jars with plastic lids for that:

http://www.amazon.com/1-gallon-USDA-Fermentation-Glass-Jar/dp/B006ZRBGSC

The solution should be good for a couple of weeks, I think, if stored in a cool dark place. I guess you could also use it to treat your bucket toilet, so maybe you won't waste much.

Sorry, as you can tell I have thought way too much about this stuff. :P

u/voxamps2290 · 2 pointsr/Kombucha

This is what I use for 1F:

https://www.amazon.com/gp/product/B006ZRBGSC/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

This is what I use for 2F:

https://www.amazon.com/gp/product/B01CUJQTPI/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

When I bottle for 2F, I pour all of the kombucha into a different bowl and clean out the 1 gallon jar after each brew so the yeast doesn't gather on the bottom. I am on my 5th batch, everything has been great so far.

u/niavek · 1 pointr/Kombucha

I bought this... and this

It ended up following around in the middle the first time and formed a second on the top so now I have two.

u/staros25 · 1 pointr/Homebrewing

Like /u/officeboy I use mason jars ranging from 6 ozs all the way up to 64 oz depending on the need. They're very handy.

If I need to do something larger, I use a one gallon glass jar from amazon. Cheap and works the same as the mason jars.

If I need to get above a 1 gallon starter, I just end up using a 3 gallon carboy just like a normal brew.

u/slayeroftanks · 1 pointr/pickling

The first one says it will ferment, but because you use only vinegar you might not see much activity. Just follow instructions.

The second should get decent activity, and based off the recipe it looks like you might be able to use a one gallon container. ( I'm only estimating because I suck with metric)

Try this-
https://www.homedepot.com/p/Leaktite-2-gal-Bucket-2GL-WHITE-PAIL/202264039

or this-
https://www.amazon.com/1-gallon-USDA-Fermentation-Glass-Jar/dp/B006ZRBGSC

This is all based off you being in America, and with that in mind- you can usually find flip top/latch top jars at stores like tj max or Marshalls for about 5$. Good luck and have fun. If you have any trouble just ask.

u/Binsky89 · 1 pointr/DIY_eJuice

You can get plastic lids for the ball jars. They also make half-gallon ball jars. You can get gallon sized glass jars as well