Reddit Reddit reviews Fixable PCI-E 16X to 1X Adapter USB3.0 USB 3.0 Riser Cable Flex Flexible Extension Cable w/Molex 4 Pin Power Connector

We found 13 Reddit comments about Fixable PCI-E 16X to 1X Adapter USB3.0 USB 3.0 Riser Cable Flex Flexible Extension Cable w/Molex 4 Pin Power Connector. Here are the top ones, ranked by their Reddit score.

Computer Accessories & Peripherals
Computer Cables & Interconnects
USB Cables
Electronics
Computers & Accessories
Fixable PCI-E 16X to 1X Adapter USB3.0 USB 3.0 Riser Cable Flex Flexible Extension Cable w/Molex 4 Pin Power Connector
Fixable board with 4 holes available on PCI-E 16X side to fix PCI-E 16X connector on motherboard for more convenient management for graphics card.Thin and fast USB 3.0 cable available to connect PCI-E 1X and PCI-E 16X sides for more easier installation and faster data transfer for graphics card.Molex 4 pin power connectors available for more stable operation for graphics card while mining.One end is PCI-E 16X female and another end is PCI-E 1X male. USB cable length: 50cm.Version 006/Version 003 are identical in function. Cable colors may vary.
Check price on Amazon

13 Reddit comments about Fixable PCI-E 16X to 1X Adapter USB3.0 USB 3.0 Riser Cable Flex Flexible Extension Cable w/Molex 4 Pin Power Connector:

u/gerrye · 8 pointsr/techsupportmacgyver

The motherboard I'm using is an ASRock H97 Anniversary and it has 5 PCIe slots. Each of those card's is connected to a powered PCIe riser which uses a USB3.0 cable (with PCIe adapters on each end) to connect the card to the motherboard.

u/zhuki · 5 pointsr/EtherMining

I think it depends on the type of riser you use. I personally use the USB type ones and as for powering them, I use the same PSU that is powering the card to power the riser as well.

I was confused as you while reading on the internet, however I think the issue is with risers that can leak power back to the motherboard and I believe that is an issue with ribbon cabled risers and not the USB type ones. In case of ribbon risers, then you should power them with the same PSU used to power the motherboard.

My setup is, 3 cards + 3 risers + motherboard on main PSU and then another 3 cards + 3 risers on the second PSU using USB risers as linked above.

I have been using this setup for almost a month now and have had no issues so far.

Hope it helps clarify things a bit for you.

u/Flying_Spaghetti_ · 3 pointsr/gpumining

I got these and returned all of them. They suck. I now use these which seem to work pretty well.

u/ssjhayes · 1 pointr/gpumining

FWIW I bought these

u/toozinger · 1 pointr/gpumining




The one that failed on me: https://www.amazon.com/gp/product/B071LQFCN4/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

The ones that have worked for me (2 of 2 so far): https://www.amazon.com/gp/product/B00IMYODGS/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

The risers are 4pin molex, but connect to the SATA power

u/cf18 · 1 pointr/buildapc
u/caseyrobinson2 · 1 pointr/EtherMining

I have the right motherboard and power supply but my motherboard only supports 2 pci-e card, do I just need to buy this device - https://www.amazon.com/Fixable-Adapter-Flexible-Extension-Connector/dp/B00IMYODGS/ref=sr_1_5?s=electronics&ie=UTF8&qid=1498225512&sr=1-5&keywords=pci+usb+riser so it would support more and only this device? Can this work with 1080 ti?

u/christiandcf · 1 pointr/EtherMining

More to something like this : https://www.amazon.com/Fixable-Adapter-Flexible-Extension-Connector/dp/B00IMYODGS/ref=sr_1_5?s=electronics&ie=UTF8&qid=1498225512&sr=1-5&keywords=pci+usb+riser

You can find them cheaper on eBay, this is just for illustration.

Edit 1: If you get one of like the one I sent, please throw away that molex to SATA adapter.
The ones you sent are not recommended as they get power from SATA. Try to find the ones with Molex.