Reddit Reddit reviews Focusrite Scarlett Solo (3rd Gen) USB Audio Interface with Pro Tools | First

We found 26 Reddit comments about Focusrite Scarlett Solo (3rd Gen) USB Audio Interface with Pro Tools | First. Here are the top ones, ranked by their Reddit score.

Musical Instruments
Music Recording Equipment
Computer Recording Equipment
Computer Recording Audio Interfaces
Focusrite Scarlett Solo (3rd Gen) USB Audio Interface with Pro Tools | First
One of the best performing mic preamps the Scarlett range has ever seen, now with switchable air Mode to give your recordings a brighter and more open sound. One high-headroom instrument input to plug in your guitar or bass. Two hum-free balanced outputs provide clean audio playback.High-performance converters enable you to record and mix at up to 24-bit/ 192kHz.Quick start tool to get up and running easier than ever.Includes Pro Tools | First Focusrite Creative Pack, Ableton Live Lite, Softube Time and Tone Bundle, Focusrite’s Red Plug-in Suite, 3-month Splice subscription, and your choice of one free XLN Addictive Keys virtual instrument, all available via download upon purchase and registrationLIMITED TIME OFFER: FREE Black Rooster Magnetite upon registration and download.
Check price on Amazon

26 Reddit comments about Focusrite Scarlett Solo (3rd Gen) USB Audio Interface with Pro Tools | First:

u/kingzmoke · 3 pointsr/Logic_Studio

Honestly dude you should just buy a audio interface and a condenser microphone.


Edit : i have a scarlett solo for anyone interested $50.00 shipped anywhere in United states.

u/jbehrmusic · 3 pointsr/WeAreTheMusicMakers

Scarlett came out with the 3rd Gen recently. Do you need the 2i2, would you be OK with the Solo? I'm from the US, so I am not sure what the prices would be in EU. But here is the link for the 3rd Gen Solo ($109 USD)

- https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB/

​

As far as mic, there are plenty of options under $200. But the Rode NT-1 is an awesome mic. I actually own it, and have been using it for the past month or two with my Apollo Twin USB. It has a flat frequency response which is great for allowing the most flexibility when manipulating the audio in post. Don't get fooled by the graph, as they have updated the NT-1 [The old NT-1 had a different frequency response]. This is the new response graph.

- http://cdn1.rode.com/nt1_datasheet.pdf

​

If you're looking for used, I would check out Reverb. They have the NT-1 on Reverb for sub $200:

- https://reverb.com/p/rode-nt-1-kit-w-slash-shockmount-and-pop-filter

​

Another good mic for $200 is the sE Electronics X1 S. They have a vocal bundle on Sweetwater for $200

- https://www.sweetwater.com/store/detail/X1SVocalPk--se-electronics-x1-s-vocal-bundle

​

Lastly, there's a $150 mic called the AKG P220.

- https://www.sweetwater.com/store/detail/P220--akg-p220-large-diaphragm-condenser-microphone

- https://www.amazon.com/AKG-High-Performance-Vocal-Condenser-Microphone/dp/B00M9CUJ6W/

​

All these microphones are Large-diaphragm Condenser Microphones. And as already stated, they all have a pretty flat frequency response.

u/R530er · 2 pointsr/audio

TL;WR: I don't know how to do that, but if you'll indulge me...

First of all, my professional opinion would be for you to sell the headphones and just buy good stereo ones, since surround sound doesn't work when every speaker only plays for one ear. It's absolute snake oil. I'd also say you should avoid USB headphones, partly for these kinds of reasons.

What's happening when you use USB headphones is that the signal in that cable is digital, ones and zeros, a speaker can't play that, it needs to be converted to analog. In a USB headphone this usually happens using a DAC (Digital-Analog Converter) built into the headphones. These are almost never particularly good, especially not when they have to push 7 channels of audio and still be light enough to hang off your head.

Issue here is that W10, generally speaking, can only output through one DAC per program. And if you're legitimately pushing surround sound to your headphones, then splitting that signal to another pair of stereo headphones is going to be even more trouble, since you've got 7 channels and he's got 2.

The natural solution would be a virtual aggregate device, playing one signal through two DACs, but as far as I know it's impossible to create aggregate devices on Windows on a system level. As far as I see it, you've got two options: Either go back to the way you did it before, or sell those headphones and spend the money on a decent entry-level DAC and some good stereo headphones.

Sorry if this wasn't of much help. I seriously do want to help, because I was annoyed with the same problem before, when I was stuck with my old Mad Catz headphones, so if you have any questions or thoughts, throw them at me.

u/BobaFettThicc · 2 pointsr/buildapc

Ok.

If you want to pursue good audio I recommended the PreSonus Eris 3.5, they are good budget studio monitors. For headphones, I would recommend the Beyerdynamic DT 990 Pro 250 Ohm version. These are very good headphones for the price. Then I would pair the Beyerdynamic headphones with a good Audio Interface like Focusrite Scarlett Solo (3rd Gen) it's a good budget audio interface that doesn't break the bank. For a microphone, a Blue Yeti USB mic will do well. However, if you want an XLR microphone, which is better btw. A well-rounded XLR microphone is the Audio-Tecnica AT2020.

u/AbrahmLion · 2 pointsr/WeAreTheMusicMakers

You don't need an XLR connection.

A new 3rd Gen Scarlett Solo costs only about $10 more than the interface you have. It has balanced TRS outputs, and those will connect to your HS5 monitors through TRS 1/4-inch cables.

u/raistlin65 · 2 pointsr/audiophile

You want a USB interface like this with balanced outputs https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB
Or this
https://www.amazon.com/PreSonus-AudioBox-USB-Recording-System/dp/B071W6YVDR/

Otherwise, as the other, turn the computer volume all the way up and adjust the volume on the back of the speakers to your maximum volume you would listen to. Then you can turn the volume up and down your computer from there. Oh, turn the input sensitivity switch to the lower setting.

u/gorcorps · 2 pointsr/edrums

This is the best answer.

By connecting the drumset to the interface directly via a midi cable, you won't gain much of anything... you might as well keep it plugged in directly to your computer via USB (that's what I do). I also use AD2 so have a lot of experience with it.

What the audio interface does is act as a dedicated sound card, so your biggest gain with the audio interface would be to change your AD2 settings to use that audio interface as the sound output instead of your built in sound from your laptop. Then you either plug your headphones or speakers into the interface for audio. This is where your biggest gains in both latency and sound quality will come from. Your internal sound card is okay, but a dedicated audio interface should make a noticeable difference.

I personally recommend the Focusrite Scarlett 3rd gen. I had a Behringer which works fine, but the Scarlett had better sound quality. I would recommend the Solo for your uses: https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB

Plus that interface doesn't require a separate power supply, it's powered entirely through USB which isn't true for all of them.

So in the end you should have 2 USB connections to your laptop (one to your drum set and one to the interface) and one audio connection to the interface (either headphones or speakers).

u/kyL0h · 2 pointsr/Twitch

personally i'd probably go with a scarlett solo or 202hd amp and a e835 or sm58 mic around that price point; i'm a bit of a dynamic mic fanboy though

u/blechinger · 2 pointsr/homerecording

I believe you're looking for something like the Focusrite Scarlett series of DAC/ADC units. I'd recommend this one: https://smile.amazon.com/dp/B07QR6Z1JB/ref=cm_sw_r_cp_apa_i_SuVxDbSC995WD

There's a toggle on the device that allows you to switch between "monitor" mode and a regular pc pass through. So you can leave your headphones plugged in to the device, and the device plugged into the pc, while still being able to switch back and forth between game/jam sessions.

u/Coppenhageen · 1 pointr/headphones

I’m looking to get a Focusrite Scarlet Solo or 2i2

u/blackjakals · 1 pointr/BudgetAudiophile

If you want good mic quality, I suggest an audio interface with a pro microphone. The internal DAC in any of those audio interfaces would work great, but none of the audio interfaces have headphone amplifiers so you would need to take that into consideration when picking a headphone. They have a headphone output, but not good enough for power hungry headphones. Here is what I suggest for a good setup I believe you would be happy with:

Speakers (based off of what size you seem to be looking for):

- Vanatoo Transparent Zeros (Expensive, but fantastic sounding speakers). $360 New or $320 for "B" Stock (Refurbished)

- Audioengine A2+ (The one you suggested) = $220

- Audioengine A2+ Wireless (If you want reduced wires) = $270

- Kanto YU2 (Similar in size to the A2+, but more color options and slightly less connectivity options) = $220

- Kanto YU4 (Larger than the YU2 and more connectivity options, but for this price, I would get the Vanatoo's by far for sound quality) = $350

​

Headphone:

Sennheiser HD58X (High impedence headphone, but most people who use these say they work well without a headphone amp) - $160

Can be found on www.drop.com

​

Mic, Interface, Boom Arm combos:

- Combo Audio Technica AT2020, Behringer UMC202HD Interface, boom arm and XLR cable - $215

- Combo Audio Technica AT2020, Scarlett Solo 3rd Gen Interface, boom arm and XLR cable - $230

- Combo Audio Technica AT2020, Presonus AudioBox USB 96 2x2 Interface, boom arm and XLR cable - $189

​

Mic:

Audio Techica AT2020 - $120

​

Audio Interface:

Steinberg UR22 Mk II - $150

Scarlett Solo 3rd Gen - $110

Mackie Onyx Artist - $130

Behringer U-Phoria UMC202HD - $100

​

Boom Arm:

I have no suggestions for this.

u/PopandLocke · 1 pointr/audiophile

I've got a pair of studio monitors with balanced TRS and XLR ins that are hand-me-downs from a friend. I'm hunting for the best solution to get them up and running for under or close to $100. These two (Behringer UMC22 & Focusrite Scarlett Solo) have been interesting, but I'd much prefer something that will cut the studio monitors when I plug in headphones (ideally with a 1/4 in jack, but that's not vital), or at least allow me to turn down the monitors separately from the headphones. The Scarlett 2i2 will allow me to control both levels separately, but it's a bit over my budget, and I won't be doing any recording, so I'm wondering if there's something out there that's more focused towards my use case.

u/ChemicalPsychosis · 1 pointr/HeadphoneAdvice

I can't say since I never listened to it. Most headphone amps have a certain sound so I can't comment on that. The manufacturer states though that the Scarlett can power up to 250 Ohms so it could work depending on the impedance level of your headphones.

Source: Seen in the "Customer questions & answers" section of [ https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB/ ]

u/ToxicityInF · 1 pointr/battlestations

https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB/ref=mp_s_a_1_3?keywords=focusrite+scarlett+solo&qid=1574492982&sprefix=focus&sr=8-3

It’s for my shure mic, this mic is amazing (it’s what shroud and a lot of other streamers use) but it is a bit of a pain to setup for streaming if you’re brand new. Overall to make the mic work it costs about 1k due to cords, mic, mic stand, etc. Was it worth it? If you have the money yes. Overall for my setup which isn’t even very good it’s about 6k ish

u/royalewithcheese14 · 1 pointr/audioengineering

Honestly, as far as sound quality goes, most modern interfaces (excluding the REALLY cheap ones) will have more than adequate preamps in them. Here is a good article that may help you choose the interface that's best for you.

Personally, I really like Focusrite's Scarlett series, so the Scarlett Solo may be a good choice for you if you don't plan on using more than one microphone at a time. It's small, and entirely powered by USB, so it's easily portable. However, I'm probably biased towards gear I already own, so I would encourage you to do your own research as well.

u/Craycraft · 1 pointr/audioengineering

No problem, just recommendations and pointers.

I'm really liking the ART tube preamp/comp to interface option. Especially for toying around with. Idk if that interface is a solid choice. I'm not really using it for anything other than the analog to digital conversion I believe. Now that I'm looking at it seems the Scarlett solo would be a high quality option. 192 kHz vs 48khz sample rate.

https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B07QR6Z1JB/ref=sr_1_3?keywords=Scarlett+solo&qid=1567711187&s=gateway&sr=8-3


edit: I added some additional details to the original post.

u/able312 · 1 pointr/videography

No, it works like the interface down there. It's so you can connect an XLR compatible mic or instrument to your PC for recording in audio and video software, so unless your going to be recording to your PC with an XLR it's not that worth it. And with the DR-40 you can still just record then copy it over with the SD card!

https://www.amazon.ca/Focusrite-SCARLETT-SOLO-3RD-GEN-USB-Audio-Interface/dp/B07QR6Z1JB/ref=asc_df_B07QR6Z1JB/?tag=googlemobshop-20&linkCode=df0&hvadid=341830543675&hvpos=1o1&hvnetw=g&hvrand=16691777206743157811&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9001050&hvtargid=pla-781084951088&psc=1

u/ELISHAO12 · 1 pointr/audioengineering
u/ANaiveUterus · 1 pointr/battlestations

Focusrite Scarlett Solo (3rd Gen) USB Audio Interface with Pro Tools

https://www.amazon.com/dp/B07QR6Z1JB/ref=cm_sw_r_cp_api_i_CFyIDb5J813TA

u/tehpest22 · 1 pointr/HeadphoneAdvice

So I've been trying to find the JDS Labs Atom amp for a bit and I was wondering if you had a link or a link to one you'd use? Edit: is this the focusrite one you were talking about? Focusrite Scarlett Solo (3rd Gen) USB Audio Interface with Pro Tools | First https://www.amazon.com/dp/B07QR6Z1JB/ref=cm_sw_r_cp_apa_i_EIInDbF52VAXR

u/braindeadmatt · 1 pointr/IWantToLearn

cigarettes after sex (based on the songs ive heard), drown their instruments in a heavy reverb, probably some other effects too that i cant be sure of (maybe a filter, to make their sounds sound kinda lofi/old. and maybe a little delay to go w/ the reverb, etc).

idk really but i'd probably just try to recreate one of their songs urself in a DAW and see what u learn from it.

and in regards to the mic, you dont really need a mic, you can use a usb audio interface (like this one or this one, which is more popular & expensive) to plug the guitar directly into the computer (for alot cheaper than you would probably get 4 a mic).

also idk if you need all the pedals & shit, maybe you want to but in a DAW (FL studio, logic, ableton, etc) you can add pedal effects (reverb, delay, distortion, etc etc) that come with the DAW to the guitar audio signal coming into the computer.