Reddit Reddit reviews Ford Racing M9424P46 Intake Manifold

We found 4 Reddit comments about Ford Racing M9424P46 Intake Manifold. Here are the top ones, ranked by their Reddit score.

Automotive
Replacement Parts
Automotive Replacement Engines & Engine Parts
Automotive Replacement Engine Parts
Automotive Replacement Engine Intake Manifolds & Parts
Automotive Replacement Engine Intake Manifolds
Ford Racing M9424P46 Intake Manifold
Production composite intake manifold used on 2001-2004 4.6L SOHC 2V Mustang GTManifold fits 1999-2004 Power Improvement (PI) head portsFor Off Road Use Only, can be used on 1996-1998 engines with Performance Improvement (PI) heads, custom calibration requiredAdditional modifications and parts requiredRequires intake gasket set 4C3Z-9439-CA available from your local Ford Dealer
Check price on Amazon

4 Reddit comments about Ford Racing M9424P46 Intake Manifold:

u/JALKHRL · 3 pointsr/CrownVictoria

https://www.amazon.com/Ford-Racing-M9424P46-Intake-Manifold/dp/B000CNHT0E
I went with this one when mine failed, can't be happier.

u/redwingvksm · 2 pointsr/CrownVictoria

I just replaced my 06 CVPI. I replaced with factory (https://www.amazon.com/gp/aw/d/B000CNHT0E?psc=1&ref=ppx_pop_mob_b_asin_title) and like it better than the dorman. Dorman/aftermarket fitting is weird (it works, but some bolts are 'tight' threading in) and the flash/roughness leftover from the plastic casting is rather nasty. It's a part you'll only replace once, I'd stick with oem. Ive done 30+ of these (I'm a mechanic.)

u/SgtMustang · 1 pointr/CrownVictoria

Here it is. This is the most widely recommended manifold because it is an OEM equivalent and is from what I know, the only one that will not lose you horsepower. I certainly feel a difference coming from the Dorman.

Note I did this on a 2007, so make sure the fitment is correct for your vehicle first.

https://smile.amazon.com/gp/product/B000CNHT0E/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

Let me know if you have any questions at all. I also have photos from my breakdown. Several lessons learned on my end. Some big ones were:

  1. Removing the windshield wiper assembly and cowl. The joints that the arms swivel on can be pulled apart and regreased, which I did.

  2. Filling corrosion/pitting around the coolant ports on the heads with JB weld

  3. Disassembled fuel rail, cleaned all the injectors by hand, and replaced their O-rings. Used the Fel Pro rings, two rings per injector.

  4. On the Dorman, a lot of the mounting bolts were replaced by self tapping screws, so I had to match bolts to get the Ford part back on. I can give you the specs for those if you need them.
u/horror3 · 1 pointr/CrownVictoria

i've never worked on a car before; i'm going to look for some quotes throughout the county over this weekend, and if i can't find anything under $1000 i'll pick this up and install it.